ATTACHMENT 1 - TECHNICAL SPECIFICATION SHEET.pdf
PDF 87 KB Posted
- Attached to
- RFI sUAS Cable Connectors Solicitation
- Solicitation number
- W51AA1sUASCONNECTORS1
- Issued by
-
Department of the Army
About this file
This is a Technical Specification document for the procurement of Commercial Off-the-Shelf (COTS) electrical connectors. The specification details requirements for three distinct connector types with pigtails.
The first two specifications cover XT90 and XT60 female connectors with pigtails. Both require an XT90-F or XT60-F connector respectively, soldered to 12AWG silicone insulated, high-strand count, flexible copper wiring. Each pigtail must measure 9 inches plus or minus 0.25 inches in length. Acceptable methods for insulation and strain relief include plastic boots or heat shrink, with a minimum of 0.5 inches of strain relief required. The third specification addresses a JST-XH 6S Pack Side Tap utilizing a JST-XHP-7 connector. This connector requires 22AWG silicone insulated, high-strand count, flexible copper wiring with a total length of 12 inches plus 0.5 inches or minus 0.0 inches. Pin 1 must contain red wire and Pin 7 must contain black wire, while wire colors for pins 2-6 are optional. All three specifications include detailed diagrams illustrating proper connector assembly, wire gauge requirements, insulation methods, and dimensional tolerances.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - W51AA126QA061.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TECHNICAL SPECIFICATION
Procurement of Commercial Off-the-Shelf
(COTS) Electrical Connectors
9” +/- 0.25”
XT
XT
XT
XT
12AWG Silicone insulated, high-strand count, flexible, copper wiring.
Soldered Connection
Acceptable methods of insulation / strain relief
Plastic boot
Heat shrink
Heat shrink
0.5” Min
Specification: XT90 Female Connector with Pigtail
XT90-F
connector
9” +/- 0.25”
XT
XT
XT
XT
12AWG Silicone insulated, high-strand count, flexible, copper wiring.
Soldered Connection
Acceptable methods of insulation / strain relief
Plastic boot
Heat shrink
Heat shrink
0.5” Min
Specification: XT60 Female Connector with Pigtail
XT60-F
connector
Specification: JST-XH 6S Pack Side Tap
JST-XHP-7
connector
12” +0.5 / –0.0”
Pin 7 must contain black wire
Pin 1 must contain red wire
22AWG Silicone insulated, high-strand count, flexible, copper wiring.
Wire colors optional pin 2-6
| Slide 3: TECHNICAL SPECIFICATION Procurement of Commercial Off-the-Shelf (COTS) Electrical Connectors |
| Slide 4 |
| Slide 5 |
| Slide 6 |
File details come from the government source that posted it. Updated .