Attachment 1-Technical Capability Statement N4215825QE062.docx
DOCX document 21 KB Posted
- Attached to
- Tee Reducer and Concentric Reducer
- Solicitation number
- N4215825QE062
About this file
This document is a Technical Capability Statement for Solicitation N4215825QE062 issued by the Department of the Navy Naval Sea Systems Command. The solicitation seeks to procure two specific copper-nickel alloy (70-30 CuNi) pipe fittings: three (3) Tee Reducers (3" x 3" x 1") and five (5) Concentric Reducers (3" x 2-1/2"), both meeting MIL-DTL-24342E specifications. The fittings require precise technical specifications including specific wall thicknesses, counterbore dimensions, and weld preparation angles. Vendors must certify compliance with all technical requirements, provide a Certificate of Compliance, and confirm the items are mercury-free. The solicitation is a full and open competition, with vendors expected to understand the detailed military specifications and include shipping costs in their quotes.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ- N4215825QE062.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment (1) – Solicitation# N4215825QE062 Tee, Reducer and Concentric Reducer
Vendor shall certify that item quoted meets the capabilities, features and specifications listed below and that vendor can assume all contractor responsibilities stated below by initialing at the bottom. In order to be considered for award, this must be completed and submitted with the vendor quote.
TECHNICAL CAPABILITES STATEMENT
General Specification for ITEM/CLIN 0001 and ITEM/CLIN 0002
| Shall be provided with the following capabilities, features and specifications: |
| Yes |
| No |
All specifications listed under CLIN/ITEM 0001.
ITEM 0001 Quantity: 3 each
TEE, REDUCER,
3" X 3"X 1", CUNI 70/30, UNS-C71500,
700 PSI,
MIL-DTL-24342E,
PN-1A END PREP JOINT DESIGN,
DWG 820-1385980 REV. E OR LATER
DWG P/N 820-1385980-7-94X94X34
FOR 3":
WALL THICKNESS=0.165" MIN - 0.200" MAX
COUNTERBORE I.D.=2.851" MIN
COUNTERBORE DEPTH= 1/2"(+1/16"/-0"),
TAPER AT BOTTOM OF COUNTERBORE=4 TO 1, IF PRESENT
WELD PREP ANGLE=40 DEG (+ 5 DEG/ - 0 DEG),
FOR 1":
WALL THICKNESS=0.180" MIN - 0.212" MAX
COUNTERBORE I.D.=0.835" MIN
COUNTERBORE DEPTH= 1/4" (+1/16"/-0")
TAPER AT BOTTOM OF COUNTERBORE=4 TO 1, IF PRESENT
WELD PREP ANGLE=40 DEG (+ 5 DEG/ - 0 DEG),
MIL-DTL-24342E ORDERING DATA:
(A) FITTINGS AND FLANGES, WROUGHT SEAMLESS, BUTT AND SOCKET WELDING, 70-30 COPPER-NICKEL ALLOY (UNS C71500), MIL-DTL-24342E AUGUST 12, 2022
(B) TEE REDUCING, BW, PN-1A END PREP JOINT DESIGN, 3"X3"X1", 700 PSI, CU-NI 70/30, QTY=3 EA
(C) THRU (I) N/A
(J) PER BEST BUSINESS PRACTICE
CERTIFICATE OF COMPLIANCE REQUIRED
MERCURY FREE CLAUSE INVOKED
ITEM 0002 Quantity: 5 each
REDUCER CONCENTRIC,
3" X 2-1/2"
CUNI 70/30, UNS-C71500,
700 PSI,
MIL-DTL-24342E,
PN-1A END PREP JOINT DESIGN,
DWG 820-1385980 REV. E OR LATER,
DWG P/N 820-1385980-2-94X84
FOR 3":
WALL THICKNESS=0.165" MIN - 0.200" MAX
COUNTERBORE I.D.=2.851" MIN
TAPER AT BOTTOM OF COUNTERBORE=4 TO 1, IF PRESENT
WELD PREP ANGLE=40 DEG (+ 5 DEG/ - 0 DEG),
FOR 2-1/2":
WALL THICKNESS=0.134" MIN - 0.148" MAX
COUNTERBORE I.D.=2.381" MIN
TAPER AT BOTTOM OF COUNTERBORE=4 TO 1, IF PRESENT
WELD PREP ANGLE=40 DEG (+ 5 DEG/ - 0 DEG),
MIL-DTL-24342E ORDERING DATA:
(A) FITTINGS AND FLANGES, WROUGHT SEAMLESS, BUTT AND SOCKET WELDING, 70-30 COPPER-NICKEL ALLOY (UNS C71500), MIL-DTL-24342E AUGUST 12, 2022
(B) REDUCER CONCENTRIC, BW, PN-1A END PREP JOINT DESIGN, 3"X2-1/2", 700 PSI, CU-NI 70/30, QTY=5 EA
(C) THRU (I) N/A
(J) PER BEST BUSINESS PRACTICE
MERCURY FREE CLAUSE INVOKED
CERTIFICATE OF COMPLIANCE CLAUSE INVOKED
TECHNICAL CAPABILITY/CONTRACTOR RESPONSIBILITY CERTIFICATION
Vendor hereby certifies that vendor’s item meets or exceeds all specifications and contractor responsibilities stated in this solicitation, in their entirety, with no exceptions. __________ (initials)
DATE: _________________________________________
File details come from the government source that posted it. Updated .