Technical Data Package Summary

This is a Technical Data Package (TDP) for a FWD SEAL SLEEVE (NIIN: FNTDP0164, Version 001) used in critical shipboard systems. The document specifies comprehensive technical, quality assurance, material certification, and testing requirements for the manufacture and delivery of this component. The seal sleeve must conform to DWG 6408950 revision D, with specific dimensions (OD: 28.500" ±1/16", ID: 25.900" ±0, -1/16", Length: 11'ft 5"in ±1/4, -0") and roundness/concentricity tolerances. Multiple referenced specifications and standards apply, including ANSI/ASQ Z1.4, ISO 9002, ISO 9001, MIL-C-24615, MIL-I-45208, and MIL-STD-2035, among others. Distribution is limited to US Government agencies and their contractors per OPNAVINST 5510.1.

The package mandates extensive testing and certification requirements including dye penetrant testing, radiographic inspection, visual inspection, weldability tests, metallographic testing, and hydrostatic testing with zero leakage allowed. Material traceability from raw material through final manufacturing is required with permanent marking (RT designation and unique serial numbers). Quality assurance includes 100% inspection of all traceability markings and certifications, material certification with quantitative chemical and mechanical analysis, configuration control with Government approval of all waivers and deviations, and Government source inspection at the contractor's facility. All welding and brazing procedures require advance approval with qualification data. Documentation must be submitted in electronic format (C4 format), and material handling procedures must prevent contamination and maintain traceability throughout storage and processing. The contractor must maintain a documented quality system per ISO 10012 or ANSI/NCSL 2540.3 with Government audit access.