Attachment 1 - Statement of Work with Drawing.pdf

ATTACHMENT 1

STATEMENT OF WORK

FOR

FURNITURE INSTALLATION

USSPACECOM Joint Operations Center (JOC) (3 Seat) (Bldg 1)

PETERSON SPACE FORCE BASE (PSFB), CO

06 May 2024v2

1.0 DESCRIPTION OF SERVICES: This request includes furniture procurement for the main seating area of the Joint Operations Center (JOC) in Bldg 1 at Peterson SFB.

1.1 OVERVIEW OF SERVICES REQUIRED:

1.1.1 Location 1 – JOC : Provide all tools, materials, equipment, and personnel necessary to remove unused furniture, and provide and install new furniture (three workstations and task chairs) in the main room to the United States Space Command (USSPACECOM) Joint Operations Center (JOC), Room 1418, in Bldg 1 at Peterson Space Force Base (PSFB).

New furniture shall match existing Evans furniture. The new layout consists of the addition of three workstations (one duel connected seating position, and one separate single position) positioned against the back wall of the JOC. New layout will enable technicians to better provide enhanced situational awareness, operational capacity, and training/certification capabilities.

1.1.2 Furniture layout shall match the layout shown in attachment 1. and shall include increasing panel height at the duel workstations to provide additional security.

1.2 SPECIFIC REQUIREMENTS:

1.2.1 Contractor is responsible for verifying site conditions and field measurements prior to ordering or installing furniture.

1.2.2. Contractor shall provide a single Project Manager who shall be available through the entire project to facilitate communication, speed of delivery, decision making, and continuity. Project Manager shall be available to coordinate schedules and issues for all locations.

1.2.3. Communications cabling shall be installed by the government.

1.2.5. Contractor shall coordinate with the government for Simultaneous Operations (SIMOPS) with the USSPACECOM J6 Project Manager(s) for government communications cabling and termination work.

1.2.6. Contractor shall hold a daily SIMOPS meetings during installation to identify and deconflict issues.

1.2.7. Contractor shall provide, install, and test electrical connections for furniture, including all disconnects and connects to hardwire systems furniture into existing electrical infrastructure.

1.2.2: Location 1: JOC

1.2.2.2. Contractor shall provide power via existing circuits to each workstation in accordance with NFPA 70 (National Electric Code) and UFC 3-520-01 Change 2 dated 12 April 2021. Contractor shall extend the existing PowerLinc system using the existing circuits and shall ensure that a single circuit does not serve more than four workstations.

The government shall provide details on the circuit to be used for power.

1.3 NEW FURNITURE DELIVERY, INSTALLATION AND INSPECTION:

1.3.1: All furniture will be set in place, leveled, powered and tested, and all furniture shall be fully operational prior to acceptance by the government. All affected areas will be cleaned, dusted, and all debris will be removed from PSFB. All damaged and/or deficient items will be inspected by the Contractor and the Government for disposition and punch-list.

Any, and all, warranty issues will be annotated.

1.3.1 The Contractor will be allowed to use the loading dock or entry of Bldg. 1 for unloading of furniture. Furniture shall be delivered during business hours, Tuesday – Saturday, 0800-1700. Furniture may be staged in the atrium nearest the JOC during installation; however, the contractor shall gain approval from the program manager before doing so. The Contractor will protect all landscape, site work, and buildings during this process.

1.5 POST INSTALLATION INSPECTION: Conduct a Post-Installation Inspection after all furniture and equipment is in place. All project spaces will be inspected for completion and damage. All new damage will be the responsibility of the Contractor to repair or replace at no additional cost to the government. A single punch list will be compiled for submittal to all parties by the Contracting Officer. Post Installation Inspection will be attended by Contractor and Government personnel.

1.6 CLOSE-OUT REQUIREMENTS:

1.6.1 PUNCH LIST/CLOSE OUT: All punch lists and punch list items will be completed within seven days of final inspection. Any items that cannot be completed within that period will be addressed in writing by the Contractor. This correspondence will indicate the agreed to completion date.

1.7 INFORMATION SOURCES: The USSPACECOM POC will be available throughout this project to provide technical information. The POC will provide all necessary construction documents and resources at the Contractor’s request. USSPACECOM POC is Tony Lopes, USSPACECOM J3O, and can be reached via e-mail at tony.lopes@usspacecom.mil

1.8 GENERAL INFORMATION:

1.8.1 ACCESS TO GOVERNMENT PROPERTY AND FACILITIES: Contract personnel shall be escorted at all times while in the entrance to the JOC. Escorts shall be provided by the Government. The Contractor will provide the Contracting Officer a list of all personnel who will be working on this project. The list will be submitted at the post award conference. It will be the Contractor’s responsibility to update the list as personnel changes occur. The list will be printed on Company letterhead and contain name and Social Security Number. Background checks will be accomplished on all listed personnel.

1.8.2 PROJECT LOCATION: The Project Site is located on Peterson SFB, Colorado 80914. Use East Gate, off Marksheffel Road, for deliveries.

1.8.3 PERSONAL PROPERTY: The building users will be responsible to relocate all personal property and office files from their current workstations.

1.8.4 HOURS OF OPERATION:

1.8.4.1 Location 1- JOC: Work for this contract shall be performed over the weekend and with minimum number of days to the maximum extent possible to limit disruption to JOC operations. Furniture shall be delivered and staged during the week. Project shall not exceed 5 days of installation. The following are provided as examples of acceptable schedules.

If removal/installation will take four days, the government prefers a Tuesday – Friday schedule.

If removal/installation will take five days, schedule shall be on a Tuesday-Saturday.

Hours of operation shall be from, 8:00 am to 5:00 pm. Hours may be extended at contractor request. The contractor shall submit a schedule for government review prior to contract start.

1.8.5 FEDERAL HOLIDAYS: The following are recognized Federal Holidays. The Contractor shall not work on these days unless prior written approval is received from the contracting officer.

New Year’s Day Labor Day President’s Day Columbus Day Memorial Day Veteran’s Day Independence Day Thanksgiving Day Christmas Day Martin Luther King

DRAWING NUMBER REV

11/2/2023

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

ROOM RENDERING

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

COLORS SHOWN ARE REPRESENTATIONAL AND MAY VARY ON FINISHED PRODUCT.

COLOR SAMPLES ARE AVAILABLE IF REQUIRED FOR FINAL APPROVAL.

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

ROOM LAYOUT

45 1/4"

/4

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

CONSOLE 1

NOTE : GREY CONSOLE AND EQUIPMENT

SHOWN IS FOR REPRESENTATIONAL PURPOSES

ONLY TO SHOW CURRENTLY EXISTING

PRODUCT AND EQUIPMENT ON SITE.

NOTE :

1) THE LEFT AND TOP RIGHT OPERATORS OF CONSOLE 1 MAY FIND THE POSITIONS PROXIMITY TO EACH OTHER UNCOMFORTABLE TO WORK AT. BY APPROVING THIS LAYOUT, THE CLIENT UNDERSTANDS THIS AND WISHES TO PROCEED ANYWAY AND ALSO AGREES THAT EVANS IS NOT RESPONSIBLE FOR ANY ISSUES THAT ARISE AS A RESULT OF THE LAYOUT

2) DUE TO LIMITED AVAILABLE SPACE AND CUSTOMER FURNITURE NEEDS THIS LAYOUT MAY NOT MEET ERGONOMIC, ADA AND/OR LOCAL BUILDING CODES. BY SIGNING THIS DOCUMENT, COMPANY NAME ACKNOWLEDGES THAT EVANS CONSOLES WILL NOT BE RESPONSIBLE FOR ANY INJURY OR COMPLAINTS THAT MAY RESULT FROM LIMITED

AISLEWAYS, ENTRANCES AND CLEARANCES.

RACKMOUNT 38RU

EA3 WORKSTATION CONSOLE

60"128 1/4"

2"

THE ROOM DIMENSIONS AND LAYOUT SHOWN ON THIS DRAWING HAVE BEEN PROVIDED TO EVANS BY AN EVANS REPRESENTATIVE. THIS CONSOLE DESIGN ASSUMES A MINIMUM 34 3/4" CLEAR PATH OF TRAVEL INTO THE CONTROL ROOM. EVANS HAS NOT PERFORMED A SITE INSPECTION TO VERIFY ROOM DIMENSIONS OR FLOOR PLAN LAYOUT. WE STRONGLY SUGGEST THAT THE DIMENSIONS AND LAYOUT SHOWN ARE VERIFIED BY THE END USER PRIOR TO THE APPROVAL OF THIS DRAWING.

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

CONSOLE RENDERING

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

COLORS SHOWN ARE REPRESENTATIONAL AND MAY VARY ON FINISHED PRODUCT.

COLOR SAMPLES ARE AVAILABLE IF REQUIRED FOR FINAL APPROVAL.

CONSOLE PLAN - 1 REQ

SCALE 3/8" = 1'-0"

CONSOLE PERSPECTIVE

BASE EQUIPMENT

LEGEND

DESCRIPTIONQTYITEM

SLATWALL/SLATRAIL SINGLE TIER MONITOR ARM MAX EQ: 40 LBS (18.1 KG) VESA MOUNT: 75X75, 100X100 BLACK

REAR PARTITION WALL W/ CABLE ACCESS9 LIN. FT2

PHONE DRAWERS 27"H x 16"W x 19.75"D23

NORTH AMERICA POWER BAR; 120V/15A, 6 OUTLETS, 6' POWER CORD, CSA/UL44

35' (10.5M) POWERLINC EXTENDER CABLE; 12 AWG15

RACKMOUNT EQUIPMENT ON FRONT SLIDE-OUT/ PIVOT SHELF MAX EQ: 22"W x 15"D x 7"H (MAX 4RU)26 VENTILATION FAN w/FINGER GUARD87 UNDERCOUNTER KEYBOARD TRAY MAX EQ: 508mm W X 228mm D28 CPU (NOT BY EVANS)(MAX DIM W 8.5 in x D 18 in x H 18 in)29

10' (3M) POWERLINC EXTENDER CABLE; 12 AWG110

POWERLINC HUB; 3X2, NO CABLE211

CUSTOM BASE SHELF MAX EQ: 18"(457mm)W x 9"(230mm)D x 20.5"(523mm)H412

DRAWING NUMBER REV

11/2/2023

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

CONSOLE DETAILS

9'-7"

54" 42"

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

24" TYP MAX: 9 LBS (4.1 KG)

90°

NO REAR PANELS ON THIS SIDE

42"

/2

9' -8

/2

VENTILATED COVER

CONSOLE PLAN - 1 REQ

SCALE 3/4" = 1'-0"

CONSOLE PERSPECTIVE

BASE EQUIPMENT

SLATWALL/SLATRAIL SINGLE TIER MONITOR ARM MAX EQ: 40 LBS (18.1 KG) VESA MOUNT: 75X75, 100X100 BLACK

UNDERCOUNTER KEYBOARD TRAY MAX EQ: 20" (508mm) W X 9" (228mm) D12 VENTILATION FAN w/FINGER GUARD23 CPU (NOT BY EVANS)(MAX DIM W 8.5 in x D 18 in x H 18 in)14

NORTH AMERICA POWER BAR; 120V/15A, 6 OUTLETS, 6' POWER CORD, CSA/UL25

RACKMOUNT EQUIPMENT ON FRONT SLIDE-OUT/ PIVOT SHELF MAX EQ: 22"W x 15"D x 7"H (MAX 4RU)16

POWERLINC HUB; 3X2, NO CABLE17

20' (6.1M) POWERLINC EXTENDER CABLE; 12 AWG18

BASE SHELF MAX EQ: 20"(525mm)W x 9"(230mm)D x 20.5"(523mm)H19

DRAWING NUMBER REV

11/2/2023

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

CONSOLE DETAILS

54"

24" TYP MAX: 9 LBS (4.1 KG)

4'-8"

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

NO REAR PANELS ON THIS SIDE

VENTILATED COVER

CONSOLE SECTION

SCALE 1" = 1'-0"

DRAWING NUMBER REV

11/2/2023

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

CONSOLE SECTION

17 1/4" 24 1/4"

43 1/2"

/2

49.25" AFF

50TH PERCENTILE

MALE

55~

15~ 15~

5~

25~

"NORMAL" LINE OF SIGHT

OPTIM

AL

ACCEPTABLE

ACCEPTABLE

INFR

EQ

UEN

TLY

VIEW

ED

DISP

LA

Y

INFREQUENTLY VIEWED DISPLAY

BIFMA

G1-2002

CCOHS

RPA/RPV

30"-32"

VISUAL COMFORT RANGE

16"-27"

-NOTE: TYPICAL SECTION VIEWS SHOWN. SOME DISPLAYED OPTIONS MAY NOT BE INCLUDED. REFER TO PRODUCT PLAN VIEW, PERSPECTIVE VIEW, OR BASE EQUIPMENT VIEW FOR VIEW OF ACTUAL OPTIONS.

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

/4

MILLWORK PLAN - 2 REQ

PERSPECTIVE

FRONT ELEVATION

SIDE ELEVATION

BACK ELEVATION

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

MILLWORK

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

CONSOLE PHONE

DRAWERS

/4

16"

19 3/4"

/4

12"

CABLE ACCESS CUTOUT

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

4 PHONE DRAWERS

RACKMOUNT UNIT PLAN - 1 REQ

FRONT PERSPECTIVE REAR PERSPECTIVE

FRONT ELEVATION

SIDE ELEVATION

REAR ELEVATION

ATLANTIC RACK MOUNT FRAME BGR-3827LRD - 38RU W/ 4 TOP MOUNTED

VENT FANS, 1 PIECE FULL SWING DOOR W/ PERFORATED FRONT, STANDARD

FIXED BASE, HEAVY DUTY LEVELING FEET W/ 8 SLIDE OUT SHELVES

DRAWING NUMBER REV

11/2/2023

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

BYOUT

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

RACK MOUNT UNIT

DETAIL

24 1/2"

/4

SIDE CLADDING PANEL

/4

PERFORATED FRONT

C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

EVANS PROJECT NUMBER

19-0301-309

DRAWING

LOCATION: COLORADO SPRINGS, COLORADO

PETERSON AIR

FORCE BASE JOC

SUPPORT POSITIONS

CLIENT / PROJECT

C

AS SHOWN

SCALE

DATE

PROPRIETARY STATEMENT:

DRAWINGS AND DESIGNS ARE THE PROPERTY OF

EVANS, AND CAN ONLY BE USED OR REPRODUCED

WITH THE COMPANY'S WRITTEN PERMISSION

SIGNATURE / DATE

CLIENT APPROVAL FOR PRODUCTION

- DO NOT SCALE DRAWINGS

- ALL ELECTRONIC EQUIPMENT IS SHOWN FOR

REPRESENTATIONAL PURPOSES ONLY AND IS TO BE

PROVIDED BY OTHERS UNLESS SPECIFIED OTHERWISE.

-DIMENSIONS SHOWN HAVE A CONSTRUCTION

TOLERANCE OF ±1/16" PER 2 LINEAR FEET OF

CONSOLE PRODUCT.

GENERAL NOTES:

www.evansonline.com

TABLIS

VA

E

NSC

ONSO

LESES

HED1980

STRATEGY SX

PRODUCT

ONLY

PRODUCTS /

PROJECTS

IDENTIFIED AS

SUCH ARE

FSC®

CERTIFIED

PRODUCT

CERTIFIED FOR

LOW CHEMICAL

EMISSIONS:

UL.COM/GG

UL 2818

FINISH SCHEDULE

8.0 1.010.0

2.0

8.0 9.0

4.0 5.0

6.0 C THIRD RELEASE 10/23/2023 CT / DL

B SECOND RELEASE 8/3/2023 NE

A FIRST RELEASE 7/6/2023 CB

REVISION HISTORY

REV COMMENT DATE BY

FINISH SCHEDULE

ITEM NAME SELECTED FINISH

1.0 WORK SURFACES HPL - Wilsonart Grey Nebula 4622-60

2.0 WORK SURFACE NOSING Black Soft Urethane

3.0 WORK SURFACE PVC EDGING Black

4.0 FRONT & REAR PANELS HPL - Wilsonart Asian Night 7949K-18

5.0 END PANELS HPL - Wilsonart Sterling Ash 7995-38

6.0 END PANEL ACCENTS HPL - Wilsonart Black 1595-60

7.0 PANELS PVC EDGING Sterling Ash PVC

8.0 EXTERNAL METAL SURFACES XP Black Sandtex

9.0 MILLWORK HPL - Wilsonart Asian Night 7949K-18

10.0 E-ARMS Black

NOTE: INTERNAL FRAME AND ACCESSORIES XP Black Sandtex & Natural Aluminum

COLORS SHOWN ARE REPRESENTATIONAL AND MAY VARY ON FINISHED PRODUCT.

COLOR SAMPLES ARE AVAILABLE IF REQUIRED FOR FINAL APPROVAL.

9.0

ELECTRICAL COMPONENTS

ARE BASED ON:

120V/60Hz

TYPE: NEMA 5-15

9.0

4.0 8.0 4.0

7.0