Attachment 1 - Statement of Work.pdf

STATEMENT OF WORK (SOW)

253 CACG MODULAR ARMORY RACKS on WHEELS 08 June 2023

ATTACHMENT 1

SOLICITATION FA461323Q1023

INTRODUCTION

The product/service required is to refresh the 253 CACG Armory racks, to accommodate multiple Small Arms and Light Weapons (SA/LW), associated ammunition, and equipment. The location is 253 CACG Armory, 4200 Liberator Rd, F.E. Warren AFB, Wyoming.

SCOPE

The contractor shall furnish ALL labor, materials, equipment, transportation, tools, and supplies to complete the project as defined below. The contractor shall deconstruct, and remove, with the option of disposing of the existing armory rack system. The contractor shall, provide, assemble, finish, and/or design a new, full functional armory rack system and provide comprehensive functional training for the end users. The contractor shall provide a one-year warranty for the armory rack system, to include all parts, labor, transportation, any other costs associated with on-site repair, and within 24-hour response time. The contractor’s proposal shall result in giving the Government maximum storage for its ammunition, weapons and equipment and efficiently utilizing the space/room provided. The contractor shall be responsible for ensuring the proposed layout/design fits in the designated storage space/room. The contractor’s quote shall satisfactorily address all the requirements listed below.

REQUIREMENTS (STRUCTURE)

Modular high density weapon storage racks for long and short arms storage. Capabilities to include the following:

Max height of armory rack systems attached to walls shall not exceed 91’’ in height.

All other armory rack systems shall not exceed 91” in height.

All armory rack system doors shall allow for visual inventory of contents when closed.

All armory rack systems shall be level, secured to either walls and/or floor, and have an anti-tip design.

Weapon carriage rail system shall be fully grouted and anchored to the concrete slab.

Weapon carriage rail system shall have a heavy-duty rubber floor covering.

Weapon carriage rail system shall have entry ramps for all access points to the system.

If stacked, racks that house the M240B/M249/M107/M24/M870/M320 weapons shall be stored in the lower rack only.

The Weapon carriage rail system shall allow for the system to fully close with the rack doors in either the open or closed configurations.

Rack doors must be configured such that when the rack doors are in the fully open position, access to all of the contents of that individual rack is unobstructed while still permitting the mobile carriage system to be fully opened or closed. Unobstructed access means no part of the door, when fully opened, is directly in front of any contents of the rack. All rack mounting system components shall be reconfigurable.

System shall be contained within the boundaries outlines within Attachment 1 – Armory Floor Plan. Contractors to verify measurements during Site Visit.

FUNCTION

Provide, at a minimum, storage within the armory mobile rack system for:

70 M4A1s o M4A1 with PEQ-15 and Direct View Optic: ACOG and/or Sig Sauer Tango 6 attached.

70 M18s o M4A1s and M18s shall be stored in combos with one M4A1 stored adjacent to one M18.

2 M240s with hook for spare barrel kit 2 M249s with hook for spare barrel kit o M249 with PEQ-15 and optic attached 6 M870s 6 M320A1s o Ballistics Sighting Module (BSM) attached 2 M107s 2 M24s 40 X26 Tasers with 2 cartridges 28 Night Vision Goggles Ammo Shelving for a minimum of 8,400 rounds of 5.56 and 2,660 9mm for daily use.

All weapon systems shall be stored vertically, buttstock down, and with sights facing outward for retrieval and inventory.

Ability to secure/lock entire system and/or each rack to prevent theft.

All weapon systems shall be stable to prevent falling and excessive movement of the muzzle and buttstock.

CONSTRAINTS AND RISK

The 253 CACG Armory has low hanging air ducts on the far-right corner which may cause issues. Please see Attachment 4e.

DELIVERY DATE/PERFORMANCE CONSTRAINTS

Delivery and installation within 90 days after date of award receipt.

Removal of existing armory rack system and installation of new system shall be a continuous process completed within 60-day time period.

Contractor shall provide a minimum 30-day advance notice prior to removal of existing armory rack system.

PLACE OF PERFORMANCE

The primary place of performance is as follows:

253 CACG

4200 Liberator Rd F. E. Warren AFB, WY 82005

RECOGNIZED HOLIDAYS

New Year’s Day Martin Luther King Jr’s Birthday

Independence Day Juneteenth Memorial Day Christmas Day Labor Day Columbus Day Washington’s Birthday Veteran’s Day Thanksgiving Day

In addition to the days designated as holidays, the Government observes the following days:

Any other day designated by Federal Statute Any other day designated by Executive Order Any other day designated by a President’s Proclamation

Material delivery dates may require adjustment should the date fall on one of the recognized holidays.

Security Requirements

Not applicable