Attachment 1 - Statement of Work.pdf

Attachment 1 - Statement of Work 05 May 2026

Repair for 20E00029 (2020 Hyster 10K Forklift H155TF-AF)

Drain fuel tank and all system components and remove all containments. Remove and replace all unserviceable parts required to repair the fuel system including the injection pump, base, cover, and other fuel system gaskets, nut flange, gear supply pump, fuel pump, and fuel filter housing. Replace currently installed inline fuel filter, filter element with new parts. All parts utilized must be OEM Hyster specific. Upon completion of repairs, vendor to ensure forklift is free of leaks and abnormal noises during operation, refill system with diesel fuel, ensure all components are calibrated, torqued, reinstalled in accordance with Hyster technical data. Vendor to provide final test to ensure fuel system is registering the newly installed fuel pump, fuel system is properly pressurized and lubricated per Hyster specifications.

Maintenance to be performed at the contractor's facility. The forklift is not operational and will need to be picked up at the address below with JCSE personnel on site during pick up.

Forklift Pickup Address:

Briggs Equipment 2230 N. US Highway 301 Tampa, FL 33619

Common Access Cards (CAC) for Contractor Personnel

(a) For installation(s)/location(s) cited in the contract, contractors shall ensure Common Access Cards (CACs) are obtained by all contract or subcontract personnel who meet one or both of the following criteria:

(1) Require logical access to Department of Defense computer networks and systems in either:

(i) the unclassified environment; or

(ii) the classified environment where authorized by governing security directives.

(2) Perform work, which requires the use of a CAC for installation entry control or physical access to facilities and buildings.

(b) Contractors and their personnel shall use the following procedures to obtain CACs:

(1) Contractors shall provide a listing of personnel who require a CAC to the contracting officer. The government will provide the contractor instruction on how to complete the Contractor Verification System (CVS) application and then notify the contractor when approved.

(2) Contractor personnel shall obtain a CAC from the nearest Real Time Automated Personnel Identification Documentation System (RAPIDS) Issuing Facility (typically the local Military Personnel Flight (MPF)).

(c) While visiting or performing work on installation(s)/location(s), contractor personnel shall wear or prominently display the CAC as required by the governing local policy.

(d) During the performance period of the contract, the contractor shall:

(1) Within 7 working days of any changes to the listing of the contract personnel authorized a CAC, provide an updated listing to the contracting officer who will provide the updated listing to the authorizing government official;

(2) Return CACs in accordance with local policy/directives within 7 working days of a change in status for contractor personnel who no longer require logical or physical access;

(3) Return CACs in accordance with local policy/directives within 7 working days following a CACs expiration date; and

(4) Report lost or stolen CACs in accordance with local policy/directives.

(e) Within 7 working days following completion/termination of the contract, the contractor shall return all CACs issued to their personnel to the issuing office or the location specified by local policy/directives.

(f) Failure to comply with these requirements may result in withholding of final payment.

Health and Safety on Government Installations

(a) In performing work under this contract on a Government installation, the contractor shall:

(1) Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractors and Government personnel performing or in any way coming in contact with the performance of this contract; and

(2) Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes.

(b) The contracting officer may, by written order, direct Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract.

(c) Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract.