Attachment 1-Statement of Work.docx
DOCX document 30 KB Posted
- Attached to
- Up Cut Saw-DLA San Joaquin, CA
- Solicitation number
- SP3300-26-Q-0225
- Issued by
-
Defense Logistics Agency Distribution
About this file
This is a Statement of Work (SOW) for the purchase and installation of one (1) Up Cut Saw at Defense Distribution Depot San Joaquin (DDJC) in Tracy, California. The requirement is to replace existing radial arm saws that do not meet current OSHA safety standards. The contractor shall provide all necessary labor and materials to deliver, install, and place into operation a new Up Cut Saw that meets or exceeds the specifications of a Vista Machine Model S24 Up Cut Saw with Tiger Stop. Key specifications include a 24-inch saw blade with Tiger Stop, 230-240 volt 3-phase 60-cycle electrical operation, 10 HP TEFC 3-phase motor, VFD soft touch magnetic starter, 24 VDC machine controls through programmable logic controller, adjustable saw cut speed control, safety interlock between Tiger Stop and saw, 12-foot roller in-feed table, and 16-foot working/wood cutting dimension roller out-feed table. The equipment must comply with all OSHA, federal, state, and local codes and regulations.
The contractor's primary tasks include fabricating and delivering the Up Cut Saw, installing it at the specified location, and providing one 8-hour training period on safe operation and maintenance. The saw shall be connected to existing electrical and ventilation systems with no additional modifications required. All transportation and shipping costs are the contractor's responsibility. The contractor must provide a complete set of operator, parts, and service manuals with delivery, and warranty coverage shall be manufacturer's standard but not less than one-year parts and labor. Final acceptance will be performed by DDJC personnel. Delivery shall be coordinated with Joshua Callahan (209-839-5181 or 209-876-2982) or Melissa Arceo (209-839-5114) at Warehouse 22-Section 1, Defense Logistics Agency Defense Depot, 25600 S. Chrisman Rd., Tracy, California 95304.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SP330026Q0225.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work (SOW) Purchase and install Up Cut Saws one (1) each at DDJC.
Background:
a. Requiring Organization Defense Distribution Depot San Joaquin, CA (DDJC)
b. History Saws are required to replace existing radial arm saws that lack necessary safety equipment required to meet OSHA standards.
c. Purpose of the Statement of Work (SOW):
Purchase new Up Cut Saws one (1) ea.
1. Scope of Work to be Performed by Contractor:
The contractor shall provide all necessary labor and material to construct, deliver and place into operation one (1) new Up Cut saws. All equipment furnished shall be new from the manufacturer’s most current production. The saw shall be in compliance with all OSHA, federal, state, and local codes and regulations and shall conform to the best quality of materials and workmanship. Accessories not specifically mentioned herein, but necessary to furnish complete systems ready for use, shall also be included and named. All transportation/shipping of the purchased saws shall be provided by the contractor.
The machines must be equal to or greater than the Vista Machine Model S24 Up Cut Saw:
1ea 24” Up Cut Saw with Tiger Stop.
Salient Characteristics:
· 230-240 volt, 3 phase, 60 cycle electrical operation
· Machined flat tabletop
· 6" high fence rail clear through machine
· 24" TCG, Carbide Tipped Saw Blade
· 10 HP, TEFC, 3 phase motor
· VFD Soft Touch Magnetic starter and saw motor brake
· 24 VDC machine controls through plc
· 2 Hand cycle control
· Saw access door kill switch
· Adjustment Rod for proper clamp/guard height
· Adjustable saw cut speed control
· Saw access door switch
· Safety interlock installed between Tiger Stop and Up Cut saw
· Air filter/regulator with shutoff valve for air supply
· Left side feed
· OSHA safety blow gun
· 12ft roller in-feed table. Rollers on 6in center 12” wide conveyor with 3in high fence rail
· 16ft working/wood cutting dimension roller out-feed table. 20in wide (16in usable load space width) with mounted Tiger Stop
· GSX Gang Stop
· 60amp maximum service required
Exterior color – Manufacturer’s standard.
Warranty Coverage - Warranty coverage shall be manufacturer’s standard warranty but not less than one-year parts and labor.
Operator, Parts and Service Manual(s) and Training – The contractor shall provide with delivery, one (1) complete set of manuals with each machine.
2. Definitions of Terms and Abbreviations:
a. DDJC: Defense Distribution Depot San Joaquin
b. OSHA: Occupational Safety Health Administration
3. Description of Contractor’s Tasks:
| Task 1: | Fabricate and Deliver of one (1) each Up Cut saw. Saw to be connected to existing electrical connections, no requirement for additional electrical work is required. Saw to be connected to existing ventilation system, no additional ventilation system modification is required. |
| Task 2: | Install one (1) Up Cut Saws in location identified in section 1. |
| Task 3: | Provide one (1) 8 hour period of training instruction on the safe operation and maintenance of the installed Up Cut Saw. Training to be conducted at one location to be identified by personnel at the receiving location on the day of delivery and installation. |
4. Certification and Acceptance:
Final acceptance of the Up Cut saw will be performed by personnel at the receiving location.
5. Project Management Approach:
6. Performance and/or Delivery Schedule:
The contractor shall coordinate the delivery to the locations listed below with the POC listed below.
7. Shipping Location
QTY: 1EA
Defense Logistics Agency Defense Depot, San Joaquin 25600 S. Chrisman Rd. Warehouse 22-Section 1 Tracy, California 95304 ATTN: Joshua Callahan @ 209-839-5181 or 209-876-2982 and Melissa Arceo @ 209-839-5114
File details come from the government source that posted it. Updated .