Attachment 1 - Statement of Work Dated 26 June 2026.pdf
PDF 639 KB Posted
- Attached to
- B-52 Fall Protection
- Solicitation number
- FA460826QS046
About this file
This is a Statement of Work (SOW) for the 307th Aircraft Maintenance Squadron at Barksdale Air Force Base, Louisiana, issued under contract number FA460826QS046 on June 26, 2026.
The contractor shall provide all labor, material, tools, parts, transportation, and incidentals necessary to perform annual inspections on two existing fall arrest systems located in Hangar One (Building 6604) at Barksdale AFB. The work shall be performed on-site at 817 Lindberg Road East, Barksdale AFB, LA 71110, with the period of performance to be determined. Work shall be scheduled Monday through Friday from 0700 to 1700 hours, with no weekend or holiday work without prior approval from the 307th AMXS. The contractor shall conduct comprehensive annual inspections in accordance with applicable manufacturer requirements, OSHA regulations, and relevant industry standards. The fall protection system consists of an overhead enclosed dual-rail track system capable of supporting three simultaneous users per wing across the B-52 wingspan working area. The contractor must inspect all system components including rails, anchors, trolleys, connectors, fasteners, and support structures to verify structural soundness and operational safety. The contractor is responsible for reattaching bird netting removed during inspection and providing secondary attachment means where required. Upon completion of each inspection, the contractor shall deliver written inspection reports, system compliance certification, and documentation of any deficiencies with recommended corrective actions. No work shall be performed above parked aircraft, and the contractor must provide and maintain safety signage and barricades throughout work activities. The contractor must comply with base security requirements, maintain appropriate vehicle registration and insurance, prohibit weapons and firearms on base, provide employee safety training and Personal Protective Equipment, and maintain housekeeping standards in work areas. All accidents and incidents must be reported to the 307th AMXS Point of Contact, with full cooperation in any government-conducted investigations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2 - Wage Determination.pdf | ||
| Solicitation - FA460826QS046.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
307th Aircraft Maintenance Squadron
Prepared by 307th AMXS Barksdale AFB, LA 06/26/2026
FA460826QS046
Attachment 1
1. DESCRIPTION OF WORK:
1.1 Objective: Vendor/Contractor shall provide all labor, material, tools, parts, transportation, and incidentals necessary to inspect 2 each fall arrest systems at Hangar One, Bldg. 6604 on Barksdale AFB.
1.2 Place of Performance: On site Barksdale AFB
1.3 Period of Performance: TBD.
1.4 Scope: Vendor/Contractor shall:
1.4.1. Perform annual inspections on 2 each fall arrest systems.
BACKGROUND: Hangar one (Bldg. 6604) 2 existing fall arrest systems require annual inspections.
1. TECHNICAL REQUIREMENTS: See Attachment A.
2. GOVERNMENT – FURNISHED EQUIPMENT (GFE) and SUPPORT: None
3. DELIVERABLES: Vendor/Contractor shall inspect 2 fall arrest system annually.
4. SECURITY REQUIREMENTS: Contractors will adhere to all the following requirements.
4.1 All Vendor/Contractor vehicles should have markings with the company name for quick identification of ownership and notification if they are involved in an incident.
4.1.1 Conduct Requirements: The Vendor/Contractor shall ensure that all of his/her employees comply with the base regulations and properly conduct themselves while on the base during and after delivery.
4.1.2 Vendor/Contractor shall ensure that all of his/her employees comply with base traffic regulations during and after delivery. All contractor vehicles shall have proper/current registration and insurance during and after delivery.
4.2 Weapons, Firearms, Ammunition. Contractor employees are prohibited from possessing weapons, firearms, and ammunition on themselves or within their contractor or privately owned vehicles on base during and after delivery.
4.3 Vendor/Contractor shall be responsible for safeguarding all government property, and controlled forms provided for contractor use. No work/inspection of the fall protection system will be performed at any time above a parked aircraft. Safety signage and barricades shall be provided and kept in place by the contractor for the entirety of installation.
FA460826QS046
5. SAFETY:
5.1 Vendor/Contractor shall have a safety plan for their employees. Contractor shall instruct each employee in the recognition and avoidance of unsafe conditions and regulations to his or her work environment to control or eliminate and hazards or other exposure to illness or injury. Contractor shall provide their employees appropriate Personal Protective Equipment (PPE) and mandate proper wear of gear.
5.2 Accident/Incident Reporting and Investigation. Contractor shall record and report to the 307 AMXS POC all available facts relating to each instance of accidental damage to government property or injury to either Contractor or Government personnel. Contractor shall secure the accident scene and wreckage until released by the accident investigative authority through the 307th Safety office. If the government elects to conduct an investigation of the incident, Contractor shall cooperate fully and assist the government personnel until the investigation is completed.
6. DELIVERY: 817 Lindberg Rd E Barksdale AFB, LA 71110
7. HOUSEKEEPING: Contractor shall ensure all areas of Hangar One that they are working in remain neat and clean.
8. WORKING HOURS: Contractor shall schedule all work to be performed Monday-Friday from 0700 to 1700. No weekend or holiday work will be scheduled without approval from 307th AMXS.
9. PROJECT LIAISON:
Attachment A
Inspection of Fall Protection System
The contractor shall perform a comprehensive inspection of the existing fall protection system that provides coverage across the working area of the wingspan of
FA460826QS046
a B-52. The system consists of an overhead enclosed dual-rail track system capable of supporting three simultaneous users, or the equivalent, per wing.
The inspection shall be conducted annually in accordance with applicable manufacturer requirements, OSHA regulations, and all other relevant industry standards. The contractor shall inspect all system components, including but not limited to rails, anchors, trolleys, connectors, fasteners, support structures, and associated hardware, to verify the system remains structurally sound, fully operational, and safe for continued use.
The contractor shall be responsible for reattaching any bird netting removed to facilitate inspection or maintenance activities. A secondary means of attachment, such as a safety cable or approved equivalent, shall be provided where required to protect against component failure or collapse.
Upon completion of each annual inspection, the contractor shall provide written inspection reports, certification of system compliance, and documentation of any deficiencies identified along with recommended corrective actions.
FA460826QS046
File details come from the government source that posted it. Updated .