Attachment 1 - Statement of Requirements (SOR).pdf
PDF 185 KB Posted
- Attached to
- Video Production Switcher - Maxwell AFB
- Solicitation number
- FA330020Q8996
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2 - Clauses and Provisions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Minimum Requirements
Video Production Switcher
1.0 INTRODUCTION. LeMay Ctr./PA (AUTV) requires the purchase of a new Video
Production Switching and IP Live Streaming System
2.0 DESCRIPTION OF ITEMS. The following minimum requirements are required for performance under this contract. System will be designed for use in a permentaly mounted video production studio
2.1. General requirements/capabilities:
2.1.1 All parts must be mountable in a standard 19” equipment reack with the exception of the Control Panel. Control Panel will be mounted on a table top surface.
2.1.2. All connections will be accessible from the outside of the case on the rear of the unit(s).
2.1.3. System will include dual redundant power supplies with automatic switchover.
2.1.4. System will meet all of the following audio/video (A/V) formats:
4K UHD video will conform to SMPTE 2036 (UHDTV1 using Square Division Quad Split)
3G-SDI video will conform to SMPTE 424M (Level A) HD-SDI video will conform to SMPTE 292M
SD video will conform to SMPTE 259M and ITU-R BT.656
Analog audio levels will conform to SMPTE RP-155
2.1.5. System will provide Support for hardware tally via HD15 GPI connector at a minimum.
2.1.6. System will be Genlock capabile and will support SD (Bi-level) or HD (Tri-level) reference signals.
2.1.7. System will provide support for standard MIDI protocols enabling third-party device control.
2.1.8. System will be able to setup and store session settings and user configurations in reusable sessions.
2.2. Live video switching capability.
2.2.1. System will have a minimum of 12 simultaneous 3G/HD/SD-SDI live video inputs. Inputs will be connected via BNC connectors
2.2.1 System will provide input format configuration, scaling (including 3:2 intelligent pull-down) and frame synchronization on each of the 16 inputs independently allowing the intermixing of different input formats.
2.2.2. Each input will allow full, independent color correction, image cropping and keying.
2.2.3. System will provide a minimum of 4 independently configurable 3G/ HD/SD SDI outputs and will have seperate program and preview monitor outputs, three configurable multiviewer output and 1 HDMI output.
2.2.4. System will support the following resolutions:
3840x2160 23.97/24/25/29.97/50/59.94
1080p 23.97/24/25/29.97/50/59.94 1080i 50/59.94/24p, 720p /23.97/24/25/29.97/50/59.94
Support for both NTSC and PAL
2.2.5. System will support the following playback formats:
Video: AVI, DV, DVCPro, DVCProHD, FLV, F4V, H.263, H.264, MOV, MKV, MJPEG, MPEG, MP4, WMV, WebM, and more
Image: PSD, PNG, TGA, BMP, JPEG, JPEG-XR, JPEG2000, EXR, RAW, TIF, WebP, and more
Audio: AIFF, MP3, WAV, and more
2.3. Live audio mixing/switching capability.
2.3.1. System will have a minimum of 8 SDI embedded audio inputs.
2.3.2. System will have a minimum of 2 AES/EBU/Balanced XLR inputs at mic/line levels and 6 (3 stereo pair) ¼” phono line level inputs.
2.3.4. System audio outputs will at a minimum include 4 SDI outputs with embedded audio, 2 AES/EBU XLR outputs and four ¼” line level outputs.
2.3.5. A stereo ¼” headphone jack will be provided for audio monitoring
2.3.6. System will include an integrated multi-channel audio mixer for internal and external audio sources, outputs, stream and headphones, Pan control, solo auditioning, seven-band equalizer and stereo compressor/limiter per input and output, with per-input audio delay control.
2.3.7. System will include Multi-bus routing of audio source channels to any combination of outputs, with independent level control over channels 1&2.
2.3.8 System will include Audio Follow Video (AFV) capabilities enabling audio to follow multiple video sources. Support for unlimited audio grouping combinations will be included.
2.3.9. All digital audio inputs will be equipped with an audio time-base synchronizer.
2.4. Network accessible live inputs.
2.4.1. System will have the capability to accept a minimum of 2 inputs via a gigabit connection.
2.4.2. At a minimum the following sources will be supported: wireless Apple® AirPlay® devices; 3Play 4800, 440, 425 or Mini; TalkShow; USB video sources; video over IP sources; RTMP or RTSP streams and HTTP streaming video sources.
2.4.3. System will be able to support direct content uploads or pushes to YouTube, Facebook, Twitter, FTP, local or external storage, and network other network servers.
2.5. Video storage and playback capabilities.
2.5.1. System will include a minimum of 6tb internal storage
Capacity varies by format, resolution and file specification
Supports recording to external storage via USB 3.0 and eSATA Supports shared storage integration and third-party partner solutions.
2.5.1. System will provide a minimum of 15 content buffers to facilitate the playback of video, animation, graphics and still images.
2.5.2. Buffers will provide a minimum of 10 animation buffers and 5 still & title buffers, with multiviewer, animation preview, title editing and presets included.
2.5.3. System will be able to Grab (capture) full resolution, de-interlaced still images from all inputs and outputs, and freely choose to add grabs to all Buffer destinations.
2.6. Macro capabilities.
2.6.1. System will provide the capability to record, store, edit and automate commands and user configured operation sequences. Macros will be used to accomplish, at a minimum, the following tasks: Record configurations and operation sequences, then attach these sequences to keyboard shortcuts. Users will be able create shortcuts to control surface actions, MIDI controllers, or on-screen hotspots for recall and automation.
2.7. Mix/Effect (M/E) Buss capabilities.
2.7.1. System will provide 4 fully configurable M/E channels with re-entry for video mixing, compositing, effects, real-time motion tracking and virtual sets.
2.7.2. Each M/E buss will support 4 independent Key layers, TransWarp effects, and will allow various blending modes between layers.
2.7.3. When in Mix mode the system will allow secondary switcher operation for output, submix or recording, with Program/Preview workflow and transitions.
2.7.4. When in Effects mode the system will provide multi-layer compositing, effects generation and virtual set application, with per-source 3D DVE, scaling, cropping, edge feathering and keying.
2.7.5. System will include an integrated effects engine on all effects channels that supports standard transitions, customizable animation store transitions with audio, and overlay effects.
2.7.6. System will allow for user created animations using per-pixel alpha channel blending.
2.7.7. System will provide a minimum of 4 primary Downstream Key (DSK) channels, plus 4 additional Key layer per M/E bus. Each DSK will utilize independent transition controls, 3D DVE, edge feathering, scaling and cropping.
2.7.8. Integrated chroma and luma keying technology will be available on all source channels and M/E buses.
2.7.9. System will provide the following keyer abilities:
16 x input keyers 4 x media player keyers
4 x M/E keyers 15 x buffer keyers
2.8. Integrated Virtual Set capabilities.
2.8.1. System will include, at a minimum, 30 HD live virtual sets. All virtual sets will include presets, multiple camera angles, real-time reflections, and specular highlights.
2.8.2. Users will have the ability to effectively “live pan and zoom” of virtual camera and will be able to use customizable virtual camera presets with animated pan, zoom and pedestal moves.
2.8.3. System will support up to 4 switchable live sources and multi-box effects, with per-source 3D DVE, edge feathering, scaling, cropping and keying.
2.8.4. System will support custom-created virtual sets generated.
2.9. Live Streaming Capabilities.
2.9.1. System will provide live HD content delivery to the internet via use of presets supporting most common streaming profiles and custom multi-bitrate streaming profiles, including RTMP streaming using H.264 (ex.
Adobe Flash Media Server), Microsoft Windows Media Push/Pull, and browser-based streaming applications, with Ustream and
Livestream native integrated support.
2.9.2 System will provide an integrated Streaming Profile Manager with presets for Facebook and YouTube streaming. Additionally system will allow the use of custom profiles designed by the user.
2.10. Monitoring capabilities with multiviewer.
2.10.1. System will provide 2 DVI outputs for the user interface and for the
Multiview preview displays.
2.10.2. System will be able to provide preview all sources or select sources in a variety of layouts and dual-monitor display. Displays will include any combination of input sources, Program, Preview, M/E buses, clocks or images.
2.10.3. System will include an integrated Waveform and Vectorscope capable of full field rate with digital calibration, color preview and support for ITU-R Rec. 601 and 709.
2.11. Miscellaneous capabilities/standards.
2.11.1. System must conform to the following standards:
2.11.1.1. HD-SDI video will conform to SMPTE 292M
2.11.1.1. SD video will conform to SMPTE 259M and ITU-R BT.656
2.11.1.3. Analog audio levels will conform to SMPTE RP-155
2.12. Control Panel requirements.
2.12.1. Control Panel will be Intuitive layout mapped directly to the switcher system to allow for maximum interaction with all features, including operation of the main switcher, all M/E rows, all effects banks.
2.12.2. All keys and fade bars (T-Bars) will have backlighting enable to allow heightened visibility of control surface activity under any lighting conditions.
2.12.3. Control Panel will allow triggering of complex macros and layerd operation sequences.
2.12.4. Control panel will operate independently of any other required keyboards, mice or other input devices.
3.0 INSTALLATION REQUIREMENTS: NO INSTALLATION REQUIRED
4.0. DELIVERY REQUIREMENTS: Deliver to 42d ABW PA/PAT 600 Chennault Circle, Building 1405/room 130, Maxwell Air Force Base, AL 36112
5.0. WARRANTY: System will include the standard manufacturer’s warranty
6.0 GENERAL INFORMATION: ALL items provided must be brand new.
Refurbished/remanufactured items or previously used items are not authorized.
File details come from the government source that posted it. Updated .