Attachment 1 - Statement of Need - JSOU Production equipment F2VUJU2202AW01.pdf

Statement of Need (SON) Project for JSOU to Build 16ft x 12ft x 8ft Strong Set, Elliptic Desk, and Flooring

Services Needed: Consultation on the project to build 16ft x 12ft x 8ft Strong Set, Elliptic Desk, Flooring, Upper grid/truss to support Barbizon lighting or equal and power boxes wiring harness (whips), transportation of materials and fabricated set to destination, installation and setup of (production) fabricated set, lighting, flooring and grid/truss and lastly training on the overall operations and maintenance of all deliverables at final destination.

Location: Joint Special Operations University, Bldg. 5200 CRM07-1st floor, 7701 Tampa Point Blvd., MacDill AFB, Fl 33621

Delivery Schedule: Consultation/project 30 days of award and Delivered/Installation/Training within 120 days of award.

Minimum Product Requirements:

CLIN 0001:

- Set Floor/Qty: 221 - 32 sq ft per carton NOTES: Vendor will not install flooring. Flooring will be drop shipped so it can be installed before set arrives 7 Cartons Total. Does not include any adhesives. Government is responsible for ensuring product compatibility with current flooring conditions — Karndean Loose Lay Flooring or Equal

- Set Walls/Qty: 4 - Flat Wall, 40"x95" with 1/8" PETG/Vinyl/Laminate Skin 4

- Set Walls/Qty: 4 - Flat Valance, each section 4" tall x 40" wide, includes LED RGB light tape in valance face, and white light fixtures pointing up and/or down

- Set Walls/Qty: 2 - Flat Wall, 14"x95" with 1/8" PETG/Vinyl/Laminate Skin

- Set Walls/Qty: 2 - Flat Valance, each section 4" tall x 14" wide, includes LED RGB light tape in valance face only or Equal

- Set Walls/Qty: 5 - Curve Wall 40"x95" with 1/8" PETG/Vinyl/Laminate Skin

- Set Walls/Qty: 5 - Curve Valance, each section 4" tall x 40" wide, includes LED RGB light tape in valance face, and white light fixtures pointing up and/or down

- Set Walls/Qty: 2 - 1/2 Round Column 18"x95" with 1/8" PETG/Vinyl/Laminate Skin

- Set/Qty: 2 - SIX037 SIXPAR 100; 6-IN-1 LED PAR 7X12W, DMX and Powercon Cable Kit - or Equal

- Set/Qty: 1 Steel Monitor Mount wall mount and install for frames (monitor not included)

Attachment 1 - Statement of Need FA481422TF131

- Desk/Qty: 1 - Elliptic desk, laminate finish 47" x 81" oval top, height 36", locking castors - Flat front is 25"T x 40".75"W, approx. 315 pounds

- Desk Accessory/Qty: 1 - Steel Monitor Mount wall mount and install for desk face (monitor not included) or Equal

- Desk Accessory/Qty: 1 - Edge Lighting RGB LED Tape, multi-channel controller, with power supply, DMX drivers, and install

- Desk AutoCAD labor to redesign structure and program CNC machine to accommodate linear actuators

- Desk Accessory/Qty: 2 - Linear Actuator 36"-42" height adjustment, tracking and switch, install in Desk base or Equal

- Desk Accessory/Qty: 1 - Fabric Top for Desk, 1/8" Sintra base, custom contoured to desk, with fabric glued to Sintra and wrapped around

- Lighting Set Equipment/Qty: 1 - Barbizon gear

• FLX S24 CONSOLE - or Equal

• Astra Light Panels - or Equal

• KL FRESNEL 4 is a 50W 3,000K >97CRI Warm White LED Fresnel - or Equal

- Barbizon Truss Lighting GRID/Qty 1 - 10'-0" X 8'-0" X 5'-4.25" - or Equal

- Design Set/Qty 2 - 1 day - 3D Renderings - Includes 2 revisions per day of design, gathering all information about studio uses, producing rough designs for comments, revisions, and final 3D renderings with approved design elements

- Delivery and Installation labor/Qty: 1 - 2 installers x 2 days install with all travel expenses