Attachment 1_Specifications.pdf
PDF 76 KB Posted
- Attached to
- Full 3D Printer Filament Recycling System
- Solicitation number
- 1232SA26Q1334
About this file
This document is a specification sheet for a Full 3D Printer Filament Recycling System. The system must operate on 110 or 115 VAC electrical power and consist of five integrated components: a Reclaimer, Extruder, Airpath, Spooler, and Pelletizer.
The Reclaimer must include separate Shredder and Granulator units with rotating blades measuring 0.25 inches wide made of A2 hardened steel, and a rotating drum featuring 0.20 inch by 0.20 inch cutting teeth constructed from 17-4 stainless steel hardened fixed blades. The Extruder must provide speed control, include a hopper with sliding gate, feature four separate heat zones, have a removable extrusion screw, and support both 1.75 mm and 2.85 mm nozzles. The Airpath component requires speed control functionality. The Spooler must offer adjustable puller-wheel speed and an adjustable traverse mechanism, be compatible with both 1.75 mm and 2.85 mm filament sizes, and deliver puller-wheel torque of approximately 13 inch-pounds (1.5 Nm). The Pelletizer must provide adjustable speed and adjustable pellet length settings.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions and Answers for 1232SA26Q1334.docx | DOCX document | |
| SF-1449_1232SA26Q1334.pdf | ||
| Attachment 2_Terms and Conditions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Full 3D Printer Filament Recycling System is needed with the following specifications:
• Voltage: 110 or 115 VAC
• Include Reclaimer with following functionality:
o Have separate Shredder and Granulator Rotating blades: 0.25” wide A2 hardened steel fixed blades Rotating drum: 0.20” x 0.20” cutting teeth 17-4 SS hardened fixed blades
• Include Extruder with following functionality:
o Speed control o Hopper with sliding gate o Four separate heat zones o Removable extrusion screw o 1.75 mm nozzle o 2.85 mm nozzle
• Include Airpath with following functionality:
o Speed control
• Include Spooler with following functionality:
o Adjustable puller-wheel speed o Adjustable traverse mechanism o Compatible with 1.75 mm & 2.85 mm filament o Puller-wheel torque: ≈ 13 in-lbs. (1.5 Nm)
• Include Pelletizer o Adjustable speed o Adjustable pellet length
File details come from the government source that posted it. Updated .