Attachment 1 Specifications .pdf
PDF 136 KB Posted
- Attached to
- Plasma Cutting System
- Solicitation number
- W9124R22Q0008
About this file
This document contains specifications for a plasma cutting system procurement. The specifications call for the removal of an existing plasma system and installation of a new plasma cutting system with a minimum cutting area of 8 feet by 22 feet. The new system must include a CNC controller comparable to a Burny10s with a 24 inch or larger touchscreen monitor. It must have absolute encoders, servo drives, a drilling station with 1 inch drilling capability and 5000 RPM or greater drill speed. The specifications also require a dust collection system comparable to a Keller Vario series collector. Training and a three to five year warranty are to be provided. The related federal contract opportunity is solicitation number W9124R22Q0008 for a plasma cutting system issued by the Department of the Army Materiel Command Mission and Installation Contracting Command at Yuma Proving Ground.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Combined SYN-SOL Plasma.pdf | ||
| Attachment 2 Clauses and Provisions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECS FOR PURCHASE WITH INSTALLATION
TO INCLUDE REMOVAL OF EXISTING PLASMA SYSTEM
NEW PLASMA SYSTEM TO COME COMPLETE WITH TABLE, AND EVAC DUST COLLECTION FILTRATION
WITH REQUIRED DUCTING
• All components must come offered with full installation minus the installation of electric power as connectivity to be performed by local contractor support.
• Installation package must include blueprint for footprint with exhaustive information for the installation of the entire system
• Must include brand name or equal, PCS 5000 EHD XLV, Cutting Machine.
o Must be mounted on min 34.5’ rails o Must have a cut zone of 8’ x 22’ o Accessories must include a 14 HP or greater Drill Station to drill 1-1/2” dia holes with tapping and counter-bore capabilities o Must include a tool carousel to accommodate 12 or more tools.
o The Cutter must have a plus / minus 45 degree zero offset style bevel head compatible with the Lincoln Spirit II 400A Plasma
• System must have a cutting length and width of 8’ x 22’ or greater.
• Must contain a Full CNC Controller. Must be comparable to the Burny®10s with 24” LCD or larger operators touch screen monitor
• Controller must be Windows 10 embedded Based.
• Must contain a Sercos 3 Motion Drive package.
• The Plasma System must contain an auto gas console.
• Must contain a Plasma Lifter for the + / - 45 Deg zero offset bevel head.
• Must contain an Oxy Fuel System.
• Oxy Torch must have an Internal Auto Ignition and Auto Height control.
• Must contain drilling station with 1 ½” hole drilling capability and 5000 RPM or greater drill speed. As stated above, drill power to be no less than 14HP.
• Drill feed and plate clamp to be servo controlled combined with precision ball screws for speed and accuracy.
• The package must offer required stand-alone software to operate the CNC with drilling and beveling functions.
• Must include wireless remote for plate alignment, tool offset setups and machine motion control.
• Easy to use operator’s console integrated into machine to allow for full view of cutting Operation
• Comfortable industrial grade operator’s platform and chair with plasma protective screen for operator safety.
• Absolute Encoders on servo drive system. Ie: – no requirement for machine homing routine.
Machine position known at all times, even after power cycles.
• Drill head must utilize CAT -40 tool holder with through tool Minimum Quantity Lubricant (MQL) coolant. (Wet [flood coolant] drilling not acceptable with downdraft cutting table)
• The table must be comparable to “PCS 5000EHD XLV Machine Cutting” o Must be able to accommodate a total cutting range of width and length of 8’ x 20’.
o Must have Electronically Zoned sections for fume extraction.
• The dust collection filtration system with ducting must contain must be comparable to the “Keller Vario series dust Collector system”.
• Old system removal must involve the following o Disconnection of old cables, hoses and control cables.
o Remove power track o Remove plasma machine o Remove table and rails.
o Remove ducting on existing extraction system.
o Remove extraction system.
• Must contain a 3 year warranty on plasma power source and auto gas console.
• Must contain a 5 year warranty on longitudinal machine rail system.
• Package must include on site training.
File details come from the government source that posted it. Updated .