The file's text, extracted by GovTribe without its formatting.
1 LTC Laser Techniques Company 50mm Laser Bore Mapping Add-on Kit
| Item |
| Catalog # |
| Description |
| 1 |
| KIT-50-P |
| 50mm Inspection Kit for use with Portable Delivery Systems |
| 1.1 |
| PRB-50-S |
| Optical Profile Probe, 50mm |
| 1.2 |
| GTA-50-P-BLANK |
| Guide Tube Adapter, 50mm, for use with Portable Delivery Systems, 50mm |
· Muzzle dimensions to be specified after receipt of order
| 1.3 |
| CAL-50-S |
| Certified Calibration Ring, 50mm, Drop-In |
| 1.4 |
| LV-WKSPC-LII |
| Calibration Workshop Setup – Standard Range |
| 1.5 |
| SHP-CASE-L |
| Hard-Sided Shipping Case, Large, CUSTOM |
| 1.6 |
| ACC-ADDEN |
| Operating Manual Addendum |
| 2 |
| KIT-P60-3/8 |
| P-60 Minidrive Portable SDU – 3/8” |
| 2.1 |
| SDU-P60-3/8 |
| Portable Sensor Delivery Unit, P60 3/8” Cable |
| 2.2 |
| C-EXT-4 |
| Sensor Extension Cable, 20 FT |
| 2.3 |
| UMB-AT-3/8-18 |
| Umbilical cable, Anti-twist, 3/8 dia, 18ft |
| 2.4 |
| C-MC-4 |
| Motor Extension Cable, 20FT |
NAICS CODE: 334519
Product Description:
Yuma Proving Ground (YPG) has a requirement for purchase for a 50mm Cannon Laser Bore Mapping Add-on Kit. The 50mm Cannon Laser Bore Mapping Add-on Kit is designed to operate with the existing BEMIS-LC Laser Bore Mapping Inspection system located at US Army Yuma Proving Ground (USAYPG). The requiring purchase provides test support measurement to the unique cannon non-contact measuring FIELD Development/Experiment 50mm XM1203 cannon tube inspection and measuring capabilities for the Physical Test Section of Metrology and Simulation Division mission requirements. The system will support the non-destructive testing (NDT) capability of the Metrology and Simulation Division. The new acquisition acquired under this requiring purchase must be form, fit, function, and software compatible and interact with the existing LTC Laser Based Inspection Systems located at USAYPG. This acquisition shall also be capable of use for precision non-contact bore measurement of 50 mm cannon smooth and rifle gun tubes. As well as the measurement to the end of the muzzle with a guide tube adaptor that attaches to the muzzle, for supporting non-contact gauge and portable Sensor Delivery unit. The laser cannon tube bore chamber gauging kit shall employ a set of opposed high-resolution sensors that are automatically non-contact the bore chamber along its length. Data from these measurements shall be saved to the government-owned LP-5000 series data acquisition instrument and stored for processing and analysis using existing data analysis software.
