Attachment 1- SOW Weapon Storage Unit for OFTP.pdf

Attachment 1 Statement of Work (SOW)

Explosive Material and Weapon Storage Unit

STATEMENT OF WORK (SOW)

Scope of Work: ICE is looking for a single contractor to build, deliver and install a single (1) portable duplex field armory storage unit used to house explosive material, law enforcement weapons and various ammunition to support the ICE Office of Firearms and Tactical Training (OFTP) program office at Fort Benning, GA. This storage unit are built to provide high-impact protection and exceed ballistic impact requirements for use in military and tactical operations.

See Attachment 2 for the drawings created by the onsite Fort Benning, GA OFTP personnel as an estimated sketch with dimensions and required capabilities for the storage unit.

Minimum Specs:

CLIN 1- STORAGE UNIT shall be the following dimensions: 44' X 27' X 10' (13,411mm x 8,229mm x 3,048mm) Portable duplex field armory. Quantity 1.

In addition, the Storage Unit must include the following capabilities and also noted is the quantity for each item:

• Anchor bracket with bolt (Quantity 4 each)

• National Fire Protection Association (NFPA) ground kit (Quantity 2 each)

• DEW 50 dehumidifier (non-explosion proof; includes installation) (Quantity 2 each)

• Additional high security single exterior steel door with a cam closer to make a set of double doors (ARM) (Quantity 1 each)

• Panic bar device for active door (Quantity 1 each)

• 8'W x 6'L (2438mm x 1828mm) steel ramp for double doors (Quantity 1 each)

• Insulated 5/8" (15.9mm) painted plywood stud wall. Studs constructed of 1/8" (3.18mm) steel tubing (price per sq ft / 304mm x 304mm)) (Covers 270.00 SF)

• Commercial metal exterior door in one end wall with closure and commercial keyed lock set (Quantity 1 each)

• 20'' (508mm) wide non-sparking aluminum shelving (price per linear foot) (Quantity 160 each)

• 10' x 30" (254mm x 762mm) aluminum work bench with shelf and isolated ground

(Quantity 1 each)

• 30'' x 60'' armory work bench with butcher block top (Quantity 2 each)

• 30" x 60" (914mm x 1524mm) double pedestal desk with one box and one file drawer in each pedestal (Quantity 4 each)

• Quad receptacle (Quantity 6 each)

• Phone drop (Quantity 2 each)

• Local Area Network (LAN) drop (Quantity 2 each)

• Must meet all required ATF and Department of Defense specifications for storage of

Class 1 explosive material and other law enforcement sensitive equipment.

Attachment 1 Statement of Work (SOW)

Explosive Material and Weapon Storage Unit

CLIN 2- FREIGHT. Contractor shall delivery the storage unit via FOB: Destination to OFTP Fort Benning, GA address.

CLIN 3- INSTALLATION/ASSEMBLE. Contractor shall provide all installation and assemble of the storage unit along with placement with assistance from the OFTP onsite personnel. The contractor shall propose a plan to address all installation/assembly steps and costs associated to include: any travel needed, on site installation (include labor categories and proposed hours with hourly rates) and number of days total.

End of SOW