Attachment 1 SouthBend PCG140SS Spec Sheet.pdf
PDF 449 KB Posted
- Attached to
- FY24 FSS Convection Ovens
- Solicitation number
- FA302024Q0068
About this file
This document is a product specification for Southbend PCG-series double-deck gas convection ovens. It provides detailed technical information on the standard construction, features, dimensions, and utility requirements for models PCG100S/S, PCG140S/S, PCG180S/S, PCG100S/T, PCG140S/T, and PCG180S/T.
The related federal contract opportunity is a Request for Quotes (RFQ) to procure two Southbend PCG140S/S, 140,000 BTU natural gas convection ovens with optional stainless steel interior, casters, and stainless steel doors. The solicitation is set aside 100% for small businesses under NAICS code 333241 with a 500 employee size standard. Quotes must be submitted by 2:00pm CST on July 29, 2024 and will be valid for 76 days. Delivery is required within 120 days of contract award. The contracting agency is the Department of the Air Force Air Education and Training Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2 FY24 FSS Convection Onvens Combo.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Approval Notes: ________________________________
PC
G
S - D O
U B
LE
Job: Item#
Printed in USA Date:____________Form PCGS - DOUBLE Rev 0 (January/2024)
STANDARD CONSTRUCTION SPECIFICATIONS
Exterior Finish: Stainless steel front, sides, top and rear jacket.
Doors: Dependent doors with windows. Low emission glass, stainless steel construction, heavy-duty welded steel frame and 5/8” diameter full-length hinge pin.
Oven Interior: Porcelain enamel finish, coved, fastener free.
Rack and Rack Guides: Heavy-duty removable wire rack guides spaced on 1-5/8” centers offer 11 different rack positions. 5 wire racks provided with each oven.
Blower Fan and Motor: 1/2hp, 2-speed motor, 1710/1120 r.p.m
Oven Heating: Oven heating is regulated by an adjustable solid state thermostat control. Jet Stream style burners direct flame towards rear of combustion chamber. Combustion products are drawn into oven interior and recirculated prior to venting.
Electronic Ignition: Hot surface ignitor with flame safety device.
Control Panel: Located on front, at right side of oven, away from heat zone. Slide out panel extends over 17” for easy servicing.
Interior Lights: Two 40 watt high temperature recessed lamps located within the oven cavity.
Legs: 6” stainless steel legs standard.
STANDARD TOUCHSCREEN
� PCG100S/S � PCG100S/T
� PCG140S/S � PCG140S/T
� PCG180S/S � PCG180S/T
Standard Features
• Patented, high efficiency, non-clog Inshot burners
• 50,000 BTU, 70,000 BTU OR 90,000 BTU (NAT or LP) per deck
• Double deck convection oven is 66.8” in height
• Standard or digital Touchscreen Controls with manual, recipe, or rack modes.
• Patented “plug-in, plug-out” control panel - easy to service
• Slide out control panel for full view servicing
• Stainless Steel front, sides and top
• Dependent glass doors (Full 180° opening)
• Energy saving high efficiency glass windows
• Heat keeping dual door seal system
• Coved, fastener-free, porcelain interior
• Stay cool heavy duty door handle
• Soft Air, two speed, 1/2 hp, fan motor
• 11-position rack guides and 5 plated oven racks
• Electronic ignition
• Forced cool down fan mode
• Interior oven lights
• (1) year limited parts and labor warranty (reference http://www.
southbendnc.com/service.html for limited warranty details) Available Controls SC-Standard Controls 140°F to 500°F solid state thermostat and 60 minute mechanical cook timer.
TC-Touchscreen Controls 150°F to 550°F temperature controller with 140°F to 200°F “Hold” thermostat. Digital display shows time and temperature. A fan cycle timer pulses the fan. Recipes can be created and used in oven group 'Rack' mode to cook multiple items at once on different timers.
OPTIONS & ACCESSORIES AT ADDITIONAL COST
� 3/4” quick disconnect with flexible hose
(specify length: 3ft, 4ft, or 5ft) � 2” air insulation panel ( stainless steel only) � Stainless steel solid doors � Stainless steel rear jacket
PCG100S/T shown with optional casters
� List the voltage, frequency, and amps required (see utility information).
120 VAC, 1 Phase, 60 Hz.
� Stainless steel oven interior � Casters 4''' or 6 '' � Independent doors.
� Stainless steel exterior bottom � Stainless steel dirt tray � Marine edge top � Export crating � Down draft diverter for direct flue
CONVECTION OVEN
PLATINUM SERIES
STANDARD , GAS, DOUBLE DECK
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1100 Old Honeycutt Road, Fuquay-Varina, NC 27526
(919) 762-1000 www.southbendnc.com
Models:
PC
G
S - D O
U B
LE
Printed in USA Date:____________Form PCGS - DOUBLE Rev 0 (January/2024)
INTENDED FOR COMMERCIAL USE ONLY.
NOT FOR HOUSEHOLD USE.
DIMENSIONS
MISCELLANEOUS
• If using flex hose connector, the I.D should not be smaller than 3/4” and must comply with ANSI Z 21.69.
• If casters are used with flex hose, a restraining device should be used to eliminate undue strain on the flex hose.
• Clearances from combustibles: Top-0”, bottom-0”, right side-0” and left-2”
• Recommend - install under vented hood
• Check local codes for fire and sanitary regulations
• If the unit is connected directly to the outside flue, an CSA approved down draft diverter must be installed at the flue outlet of the oven
• Oven cannot be operated without fan in operation
NOTICE:
Southbend has a policy of continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Dimensions shown in inches and (millimeters)
PCG100S/S PCG140S/S PCG180S/S PCG100S/T PCG140S/T PCG180S/T
Dimensions shown in inches and (millimeters)
UTILITY INFORMATION
ELECTRIC: Standard: 120/60/1 phase, furnished with 6’ cord w/3- prong plug (1 plug/deck). NEMA #5-15p. Total maximum amps 7.9 per deck.
Optional: 208/60/1 (190-219 volts). Supply must be wired to junction box with terminal block located at rear. Total maximum amps 4.8 per deck.
Optional: 240/60/1 (220-240 volts). Supply must be wired to junction box with terminal block located at rear. Total maximum amps 4.3 per deck.
Optional: 240/50/1 (208-240 volts). Supply must be wired to junction box with terminal block located at rear. Total maximum amps 6.0 per deck.
Full 180° Opening
8.5” (216)
2.5” (64)
2.5” (64)
D Stainless Steel Jacket
13.5” (343)
18.63” (473)
9”
29.34” (746)
29.34” (746)
14.5” (368)
43.63” (956)
66.75” (1695)
40.63” (1032)
11.5” (292)
64.75” (1645)
3” (76)
* one 3/4'' female connection.
MODEL BTU MINIMUM INLET PRESSURE
NATURAL PROPANE
PCG100S/S
PCG100S/T
100,000 7” W.C 11” W.C
PCG140S/S
PCG140S/T
140,000 7" W.C 11” W.C
PCG180S/S
PCG180S/T
180,000 7" W.C 11” W.C
MODEL
Depth Oven Interior Rack Clearance Shipping Crate
A B C Width Depth Height Width Depth Width Depth Height Volume Weight
PCG100S/S
PCG140S/S
PCG180S/S
PCG100S/T
PCG140S/T
PCG180S/T
37.25” (946)
30.25” (768)
39.25” (997)
29” (737)
21.5” (546)
20” (508)
28.25” (718)
21” (533)
57.50” (1461)
45.5” (1156)
81.50” (2070)
123.4 cu. ft.
(3.49 cu. m.)
1040 lbs (471.7 kg.)
* All units shipped single phase.
Single phase can be easily connected to three phase.
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
1132874022C Highlight
File details come from the government source that posted it. Updated .