Attachment 1- Salient Characteristics Tube Bender.pdf
PDF 40 KB Posted
- Attached to
- 36 MXS Tube Bender
- Solicitation number
- FA524025QM148
About this file
Attachment 1 details the salient characteristics for a Tube Bender System required by the Department of the Air Force Pacific Air Forces for solicitation FA524025QM148. The document outlines 12 specific technical requirements for the manual tube bending equipment, including: manual operation without external power, hydraulic foot-operated mandrel extractor, 360-degree chuck rotation, 195-degree bend arm movement, capability to bend tubes from 0.375in to 1.5in outer diameter, ability to bend tubes up to 180 degrees, reversible bending direction, and a maximum system dimension of 12.5ft x 48in x 48in. Additional requirements include a storage cabinet, comprehensive accessory set (clamping blocks, radius dies, wiper dies, mandrel), and an operator's manual to be provided with the machine.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2- Provisions and Clauses.pdf | ||
| FA524025QM148 RFQ -36 MXS Tube bender.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachments:
Attachment 1 - Requirement Description with Salient Characteristics
REQUIREMENT DESCRIPTION WITH SALIENT CHARACTERISTICS
In detail, please describe those physical, functional, performance, or material element qualities of an item that are essential to ensure that the intended use of the item can be satisfactorily realized.
1. The Tube Bender System should be manual use NO OUTSIDE POWER SOURCE.
2. The Tube Bender System must have hydraulic foot operated mandrel extractor
3. The Tube Bender System must have a plane of bend carriage with adjustable chuck that can rotate 360 degrees
4. The Tube Bender System must have bend arm movement of 195 degrees
5. The Tube Bender System must have the capability to properly hold and bend .375in OD tubing up to 1.5in OD tubing and 0.035in WT tubing up to.065in WT tubing
6. The Tube Bender System must have the ability to bend tubing to angles 180 degrees.
7. The Tube Bender System must have the ability to have a reversible direction of bend (clockwise and counter-clockwise).
8. The Tube Bender System must have the ability for the mandrel clamp to be able to rotate 360 degrees.
9. The Tube Bender System dimensions must be a maximum of 12.5ft x 48in x 48in (L x W x H)
10. The Tube Bender System must have a storage cabinet to store accessories for the machine
11. The Tube Bender System must have all additional accessories (Clamping Blocks, Radius Dies, Wiper Dies and Mandrel) necessary to adjust the bender in coordination with the size of tubing.
12. The Tube Bender System must have the Operator�s Manual with the machine
File details come from the government source that posted it. Updated .