Attachment 1 Salient Characteristics For Both Machines.pdf

SALIENT CHARACTERISTICS CNC MILLING CENTER

DOC NUMBER: 1138C266

1.0 SCOPE

1.1 Scope. This specification provides the minimum requirements for a CNC Milling Center machine with portable cart with NIMS Learning Kit.

2.0 Order of Precedence. In the event of conflict between the text of this specification and the references sited herein, the text of the specification shall take precedence. However, nothing in this specification shall supersede applicable laws and regulations unless a specific exemption has been obtained.

3.0 REQUIREMENTS

3.1 General Information and Coverage. The equipment shall be one of the manufacture’s current production models, new and unused, capable of performing its intended function in accordance with the operation and performance requirements specified herein. The equipment shall be complete so that when connected to the utilities and attachments specified herein, it can be used for any function for which it is designed and constructed.

3.1.1 Current Production Model. The equipment offered shall be a current production model. A current production model is defined as the manufacturer’s current production model which, on the date this specification is issued, has been designed, engineered and sold, or is being offered for sale through advertisements or manufacturer’s published catalogs or brochures. Products such as prototype units, preproduction models, or a highly modified current production models, where major components have been redesigned to meet the requirements of this specification, do not qualify as meeting this requirement.

3.2 Characteristics: The equipment shall consist of, but is not limited to the following principal components, attachments and accessories necessary to meet the requirements specified herein.

a. Travel: X 16.5in, Y 8.5in Z 7.9in

b. Spindle: LS-20B 14,000 rpm, S20T Taper, ATC

c. 11 Position Tool Rack

d. Control: Fanuc 0i-MF with10.4" LCD

e. USB, Ethernet, Custom Macro, Coordinate Rotation, Scaling, MGI with 3D Simulation

f. Coolant System (pump and tank)

g. Ethernet Access Port

h. Safety Air Pressure Sensor

i. Safety Door Interlock

j. Project Support Kit (Vise, Edge Finder, Height Gauge,Parallels)

k. Machine Stand with Leveling Casters

l. 110 VAC, 15 A

m. Milling Learning Kit

n. Crating

4.0 QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements (examinations and tests) as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the government. The government reserves the right to perform any of the inspections set forth in this specification where such inspections are deemed necessary to ensure supplies and services conform to prescribed requirements.

4.1.1 Responsibility for Compliance. All items shall meet all requirements of Sections 3. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the government for acceptance comply with all requirements of the contract.

4.2 Methods of inspections.

4.2.1 Operational Test. The system provided shall be tested by the receiving activity personnel under the observation of the contractor to verify proper operation in accordance with the requirements of this specification. Satisfactory completion of all tests is inherent in this specification and any cost associated in the correction of any defects shall be the responsibility of the vendor. The system provided will be operated for a minimum period of 8 hours without the need for correction of any defects. Proper operation and function of the system and its controls, and other associated accessories shall be verified during this trial period.

4.2.2 Examination. The equipment provided will be visually and physically examined for design, construction, material, construction, material, components, electrical equipment, workmanship, form, fit and function to determine compliance with the requirements of this specification.

4.2.3 Warranty. The vendor shall provide a 1 year warranty for the CNC Milling Center and associated accessories provided. The vendor shall detail the terms of the warranty in the proposal.

5.0 PREPARATION FOR DELIVERY

5.1 General. Preservation and packing shall be in accordance with ASTM-D3951-88, Standard Practice for Commercial Packaging.

5.2 PALLETIZATION: Contractors (drivers) delivering material to the Norfolk Naval Shipyard must come with two forms of Identification, one being a driver license or picture ID card issued by a State. The other form required is a SSN card, birth certificate issued by a state, Native American document or US citizen card. Driver(s) will not be escorted unless they have to go into the CIA. All items/boxes over 40 lbs under this solicitation and/or contract is required to be palletized. Delivery will not be accepted to any material that IS NOT palletized. The shipment will not be offloaded and will be returned.

5.3 Marking for Shipment: Marking shall be in accordance with MIL-STD-129J, Marking for Shipment and Storage. All shipments must have a label on the outside of each box, clearly providing the following information, in addition to packing slips inside the box:

Lead Document Number: N42158 – 1138-C266 Contract Number: This will be given at time of award.

5.4 Shipping. The equipment and its accessories shall be shipped by the best commercial method available. The equipment shall be shipped to:

Building 276, Receiving Officer Norfolk Naval Shipyard Portsmouth, VA 23709-5000

6.0 General. Technical questions can be answered by Robert Ridgway (757) 396-9044

SALIENT CHARACTERISTICS CNC TURNING CENTER

DOC NUMBER: 1139C003

1.0 SCOPE

1.1 Scope. This specification provides the minimum requirements for a CNC Turning Center Machine lathe with portable cart, with complete NIMS kit.

2.0 Order of Precedence. In the event of conflict between the text of this specification and the references sited herein, the text of the specification shall take precedence. However, nothing in this specification shall supersede applicable laws and regulations unless a specific exemption has been obtained.

3.0 REQUIREMENTS

3.1 General Information and Coverage. The equipment shall be one of the manufacture’s current production models, new and unused, capable of performing its intended function in accordance with the operation and performance requirements specified herein. The equipment shall be complete so that when connected to the utilities and attachments specified herein, it can be used for any function for which it is designed and constructed.

3.1.1 Current Production Model. The equipment offered shall be a current production model. A current production model is defined as the manufacturer’s current production model which, on the date this specification is issued, has been designed, engineered and sold, or is being offered for sale through advertisements or manufacturer’s published catalogs or brochures. Products such as prototype units, preproduction models, or a highly modified current production models, where major components have been redesigned to meet the requirements of this specification, do not qualify as meeting this requirement.

3.2 Definition. The equipment shall consist of, but is not limited to the following principal components, attachments and accessories necessary to meet the requirements specified herein.

a. Travel: X 180mm (7"), Z 160mm (6.3")

b. Control: Fanuc 0i-TF with 10.4" LCD screen

c. 11 Position Tool Rack

d. Control: Fanuc 0i-MF with10.4" LCD

e. USB, Ethernet, Custom Macro, MGI Conversational Programing with 3D simulation

f. Spindle 3,000 rpm, 2 hp

g. 8 Pos. Turret for 1/2" Shank External Tools

h. 4 Boring Tool Holders for 3/4" Shank Diameter

i. Through Turret Coolant System (pump and tank)

j. Safety Door Interlock

k. Machine Stand with Leveling Casters

l. 110 VAC, 15 A

m. Pneumatic 5c Collet System

n. Turning Project 1 Curriculum Kit

o. Crating

4.0 QUALITY ASSURANCE PROVISIONS

4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements (examinations and tests) as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the government. The government reserves the right to perform any of the inspections set forth in this specification where such inspections are deemed necessary to ensure supplies and services conform to prescribed requirements.

4.1.1 Responsibility for Compliance. All items shall meet all requirements of Sections 3. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the government for acceptance comply with all requirements of the contract.

4.2 Methods of inspections.

4.2.1 Operational Test. The system provided shall be tested by the receiving activity personnel under the observation of the contractor to verify proper operation in accordance with the requirements of this specification. Satisfactory completion of all tests is inherent in this specification and any cost associated in the correction of any defects shall be the responsibility of the vendor. The system provided will be operated for a minimum period of 8 hours without the need for correction of any defects. Proper operation and function of the system and its controls, and other associated accessories shall be verified during this trial period.

4.2.2 Examination. The equipment provided will be visually and physically examined for design, construction, material, construction, material, components, electrical equipment, workmanship, form, fit and function to determine compliance with the requirements of this specification.

4.2.3 Warranty. The vendor shall provide a 1 year warranty for the CNC Milling Center and associated accessories provided. The vendor shall detail the terms of the warranty in the proposal.

5.0 PREPARATION FOR DELIVERY

5.1 General. Preservation and packing shall be in accordance with ASTM-D3951-88, Standard Practice for Commercial Packaging.

5.2 PALLETIZATION: Contractors (drivers) delivering material to the Norfolk Naval Shipyard must come with two forms of Identification, one being a driver license or picture ID card issued by a State. The other form required is a SSN card, birth certificate issued by a state, Native American document or US citizen card. Driver(s) will not be escorted unless they have to go into the CIA. All items/boxes over 40 lbs under this solicitation and/or contract is required to be palletized. Delivery will not be accepted to any material that IS NOT palletized. The shipment will not be offloaded and will be returned.

5.3 Marking for Shipment: Marking shall be in accordance with MIL-STD-129J, Marking for Shipment and Storage. All shipments must have a label on the outside of each box, clearly providing the following information, in addition to packing slips inside the box:

Lead Document Number: N42158 – 1139-C003 Contract Number: This will be given at time of award.

5.4 Shipping. The equipment and its accessories shall be shipped by the best commercial method available. The equipment shall be shipped to:

Building 276, Receiving Officer Norfolk Naval Shipyard Portsmouth, VA 23709-5000

6.0 General. Technical questions can be answered by Robert Ridgway (757) 396-9044