Attachment 1 -Salient Characteristics.pdf
PDF 58 KB Posted
- Attached to
- 820 RHS Gang Drill
- Solicitation number
- F3GHBA5198A001
About this file
This document is a Salient Characteristics and Statement of Work (SOW) for dowel drilling equipment for the 820th RED HORSE Squadron's Mountain Home CSTR K-Span Reconstitution project. The specification details a specific equipment requirement for an E-Z Drill – Gang Drill (Model 210B-2 SRA) with a compatible Dust Collection Kit, targeting precise drilling capabilities for concrete work.
The equipment must meet strict technical specifications, including riding on top of a slab, operating a two-gang drill system simultaneously, drilling at intervals of 12" to 36" on center, and achieving a drill depth of at least 18" (15-3/4" with dust collection). Additional requirements include a drill bit diameter range of 5/8" to 2-1/2 inches, air consumption of 200-260 cfm, a 1-1/4" minimum hose size, 90 psi operating pressure, and specific drilling parameters such as ~2200 blows per minute and ~288 rotations per minute. The dust collection kit must be fully compatible with the gang drill system.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1 -Salient Characteristics.pdf | ||
| Combo Synopsis Solicitation - Gang Drill.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics and Statement of Work (SOW) for Dowel Drilling Equipment 820th RED HORSE Squadron
Mountain Home CSTR K-Span Reconstitution
Brand Name or Equal to: E-Z Drill – Gang Drill (P/N:814300 FNG) – Model 210B-2 SRA
And E-Z Drill - Dust Collection Kit - 96961Q
Salient Characteristics:
The required dowel-drilling equipment must have the following specifications:
• Device should have capability of riding top of slab for dowel placement. Device that only rides on grade does not meet requirement.
• Two-gang drill system that operates simultaneously
• Capability to drill every 12” to 36” on center
• Drill depth of at least 18”
• Drill depth with dust collection kit of at least 15-3/4”
• Drill bit diameter range of 5/8” to 2-1/2 inch
• Air consumption of 200 cfm (minimum)
• Air consumption with dust collection of 260 cfm (minimum)
• Minimum hose size (internal diameter) of 1-1/4”
• Operating pressure at drill motor: 90 psi
• Drill distance from corner 6”
• Drill distance from 3” in horizontal position/up to 12” in vertical position
• Blows/minute should be ~2200 bpm
• Rotations/minute should be ~288 rpm
The Dust Collection Kit must be compatible with the Gang Drill.
File details come from the government source that posted it. Updated .