Attachment 1 - Salient Characteristics.pdf

SALIENT CHARACTERISTICS

FOR

SERE School Escape Lab Aids

May 2025

FA462025QA943

Attachment 1 - Salient Characteristics

Salient Characteristics For

SERE School Escape Lab Aids

Fairchild AFB, WA

1. BACKGROUND: The Escape Labs located at FAFB are utilized to increase SERE School student practice Tactics, Techniques, and Procedures (TTPs), under the Technical Training Transformation initiative. These sheds require an inventory of equipment, to include Escape Aids, to meet mission and training needs.

2. OBJECTIVES: Provide and deliver necessary equipment to complete the purpose and initiative of Escape Labs.

3. REQUIREMENTS: The contractor shall provide all equipment IAW the salient characteristics below.

Quantities of each item are listed in paragraph 5, Equipment List.

Multi-Tool/Personal Escape Aid:

1. Leatherman Signal Multi-tool or Equal. The Escape Aid will be used mainly as a safety item assisting any trapped students or to secure students in various escape scenarios. Multi-tool with the salient characteristics:

• Be smaller than 8” pack sized multi-tool that have a pouch for storage.

• Includes a set of pliers with wire cutters

• Includes a knife

• Includes a Phillips head screwdriver

• Includes scissors

Building Material: Used to outfit and improve to meet classified facility escape requirements.

2. Doors

• Must be a 32" x 80" door slab

• Wood, plastic, or metal doors are preferred

3. Drywall Screws

• 25 lbs. of 1-1/4”

4. Plywood

• 4' x 8' x 3/4"

• Pressure treated

Tools: Used to construct, deconstruct, modify the existing escape sheds. Also used to design items to be attached to the sheds. Specifics may be classified.

5. Vacuum

• Heavy duty style shop vacuum

• 10-14 gallon

6. Vacuum bags

• Must match and fit above vacuum

7. Power strip

• 4-8 outlet power strip

8. Drill bit set

• Drill bit set that fits standard drill, 14-40 pieces is adequate

9. Work light

• Plug-in tri-pod work light with minimum 4’ cord standing roughly 4’ high.

10. Speed Square

• 7” speed square.

11. Folding Sawhorse

• 28” x 31” sawhorse made of plastic

• Folding

12. Tape measure

• 25’ folding tape measure

13. T-Square

• 48” T square

14. Reciprocating Saw

• 20V cordless saw with battery

15. Battery Charging station

• Must charge battery from associated cordless electric tools

• 4 total single battery charging stations

16. Miter Saw and stand

• 15 Amp Corded 12 in. Double Bevel Sliding Compound Miter Saw

• 32-1/2 in. x 60 in. Rolling Miter Saw Stand

17. Screwdriver bit set

• Standard fit

• 35-100 piece variety set.

18. 6-Tool Cordless Combo Kit.

• 20-Volt Lithium-Ion

• One (1) 1/2 in. hammer drill/driver

• 1/4 in. impact driver

• Oscillating multi-tool

• 6-1/2 in. circular saw

• XR 4-1/2 in. grinder

• XR 5 in. random orbital sander

• Battery must match the reciprocating saw battery above

19. Cordless leaf blower.

• Battery variety must match the above battery type.

20. Table saw

• 15 Amp Corded 10 in. Job Site Table Saw with Rolling Stand

Facility Replacement: Items to replace items that exist on the escape sheds as they get used.

21. Doorknob and deadbolt

• Exterior Single-cylinder deadbolt Keyed Entry Doorknob Multi-pack

22. Standard size door hinge

• 4 screw hole, hinge 4-1/2-in H Squared.

23. Sliding Patio Door Push-In Cylinder Lock

24. Vent covers

• Vents 16-in x 8-in Mill Aluminum Soffit Vent or equal.

• Plastic, any color

• 24”x 24” metal covers of any color.

25. Vent covers

• Vents 16-in x 8-in Mill Aluminum Soffit Vent or equal.

• Plastic, any color

• 16”x 8” metal covers of any color.

Personal Restraints: Items to be used for classified personal restraint escape training.

26. Chain

• 50ft passing link carbon steel chain

• 0.18 om D X 50 ft. L

27. Dog Chain

• Steel dog tie out chain weldless double loop design with steel wire swivel snaps on both ends

• 20-foot length

28. Floor anchor

• National Hardware 3-1/2 in. L Zinc-Plated Silver Steel Ring Pull or Equal

• 3-1/2 in. L Zinc-Plated Silver Steel Flush Pull.

29. Bolt and nut

• 3/8 in. X 4 in. L Zinc-Plated Steel Eyebolt with Nut Included

30. Flat Washer

• Zinc-Plated Steel 3/8 in. USS Flat Washer or equal

31. Combination Locking cable

• 5/16 in. D X 48 in

• 5/16 in. W X 4 ft. L Steel 4-Dial Combination Locking Cable

• L-Steel 4-Dial

32. Flexible braided Steel Locking Cable

• 3/8 in. D X 180 in. L Vinyl Coated Steel Flexible Braided Steel Cable

33. Combination padlock

• 4-1/8 in. H X 2 in. W Steel Resettable Combination Padlock.

34. Re-Pinnacle Padlock

• 1-1/2 in. H X 2 in. W Steel 4-Pin Cylinder Exterior keyed Padlock

35. L-Steel Ball Bearing Shrouded Padlock

• Magnum 2-3/4 in. H X 1-13/64 in. W X 2-3/4 in. L Steel Ball Bearing Locking Shrouded Padlock or equal Spinning Combo Padlock

36. Steel Combination Dial Combination Padlock.

• 2-9/10 in. H X 1-7/8 in. W

37. Residential Door Hinge

• Ace 3-1/2 in. L Satin Nickel Residential Door Hinge 3 pk or equal

• 3-1/2 in. L Satin Nickel

• 3 pack

38. Double Hinge Safety Hasp

• National Hardware Zinc-Plated Aluminum/Steel 3-1/4 in. L Double Hinge Safety

Hasp 1 pk or equal Keyed Hasp Lock.

• Zinc-Plated Aluminum/Steel

• Chrome-Plated Steel

39. Chrome-Plated Steel Hasp Lock

• Ace Chrome-Plated Steel 4-1/2 in. L Keyed Hasp Lock 1 pk or equal

40. Window Lock

• Window Showcase Keyed Lock

• Chrome Metallic Steel Showcase Lock.

41. Wall Vent

• Ace Chrome Metallic Steel Showcase Lock or equal

• 18 in. W X 24 in. L White Aluminum Wall Louver

42. Bolt cutters

• Ace 24 in. Bolt Cutter Black/Red 1 pk or equal

• 24” heavy duty bolt cutters

4. DELIVERY: 30 Days after Date of Award.

5. EQUIPMENT LIST:

ITEM

NO.

DESCRIPTION QUANTITY

Multi-Tool/Personal Escape Aid 01 Leatherman Signal or Equal Multi-tool/Escape Aids 80

Building Material 02 32" x 80" 6 panel primed steel door slab 24 03 25 lb. 1 1/4 Drywall screws

04 4' x 8' 3/4" pressure treated plywood 16 Tools

05 Vacuum 2 06 Vacuum Bags 6 07 4-8 Outlet Power Strip 4 08 Drill Bit Set 3 09 Work Light 4 10 Speed Square 6 11 Folding Sawhorse 12 12 Tape Measure 6 13 T Square 6 14 Reciprocating Saw 15 Charging station 4 16 Miter saw and stand 2 17 Screw Driver Bit Set 2 18 6-Tool Cordless Combo Kit 3

FA462025QA943

19 Cordless leaf blower 2 20 Table Saw with Stand 3

Facility Replacement 21 Doorknob and deadbolt 78 22 Standard size door hinge 48 23 Sliding Patio Door Push-In Cylinder Lock 24 24 24" x 24" Vent Cover 48 25 16" x 8" Vent Cover 300

Personal Restraints 26 Chain 10 27 Dog Chain 12 28 Floor Anchor 24 29 Bolts and Nuts 48 30 Flat Washer 250 31 Combination Locking Cable 12 32 Flexible Braided Steel Cable 24 33 Combination Padlock 48 34 Re-Pinnacle Padlock 48 35 L Steel Ball Bearing Locking Shrouded Padlock 12 36 Steel Combination Dial Padlock 24 37 Residential Door Hinge 24 38 Double Hinge Safety Hasp 24 39 Chrome-Plated Steel Hasp Lock 24 40 Window lock 24 41 Wall Vent 36 42 Bolt Cutters 12

FA462025QA943

Attachment 1 - Salient Characteristics