Attachment 1 - Salient Characteristics dated 4 July 2024.pdf
PDF 561 KB Posted
- Solicitation number
- FA301024Q0024
About this file
This document contains the Salient Characteristics for U-Shaped Collaboration Tables with Display Stand Kits that are required under Solicitation Number FA301024Q0024 issued by the Department of the Air Force Air Education and Training Command.
The Salient Characteristics specify that 68 U-shaped collaboration tables with a white laminate finish and built-in power/data grommets are to be delivered and installed in 17 classrooms on the 2nd floor of Thomson Hall at Keesler AFB, MS. The tables must be between 71-74 inches in length and 48-50 inches in width, with a tapered centered base to accommodate at least 5 adult students. Each table requires a display stand kit that is 67-68 inches in height and 51-53 inches in width, designed to securely house a 55-inch government-provided Samsung display. The stand must feature cable management and a pass-through for power and data cables. The display stand and table edge/bottom support are to be finished in matte black and matte silver. Delivery and installation, including debris removal, are required. This requirement aligns with the details provided in the associated federal contract opportunity.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
4 July 2024
Salient Characteristics
U-SHAPED COLLABORATION TABLES with DISPLAY STAND KIT
Quantity: 68 To be delivered/installed at: Thomson Hall, (BLDG 4213), Keesler AFB, MS 39534 2nd Floor, 17 classrooms, 4 Tables in each classroom
Rooms: 202, 203, 204, 205, 206, 207, 208, 209, 219, 220, 227, 235, 236, 248, 249, 250, 251
Description:
U-shape Table shall have the following:
- A U-shape table with knife edge feature along sides and radius of the tabletop.
- Finish: High gloss white laminate to act as a white board
- Length dimensions between 71 - 74”
- Width dimensions between 48 - 50”
- Tapered Centered Base to support table.
- The capacity to comfortably fit at least 5 adult students.
- Two built-in power/data grommets affixed to the center of the table (2-sided w/2 power, 1 dual
USB-A, 1 HDMI & 1 blank for opposite sides of the table; totaling 4 power, 2 dual USB-A, 2 HDMI per table).
o Power/data grommets shall be flush with the table when not in use.
Display Stand Kit shall have the following:
- Height dimension between 67 – 68”
- Width dimension between 51 – 53”
- Designed with an enclosure to fit a government provided 55” Samsung display
- Design shall ensure that the display will not protrude out of the enclosure and shall rest flush with the display stand (see reference pictures below).
- Display stand connects to the end of table (see reference pictures below).
- Design features a passthrough for power and data cables up to the display (see reference pictures for suggested connectors and passthrough).
- Passthrough shall allow for proper cable management and prevent accidental pulling or stepping on cords.
o Cords from the center of the table shall be discreetly routed inside the table, run along the underside of the table (not touching the ground), and lead to the display stand.
- Finish: Matte Black and Matte silver (Display stand shall be black, edge and bottom support shall be silver or black.)
Additional Information and Reference Pictures:
- Shall also include debris removal.
- Elevator located middle of building approximately 120 ft from loading dock
- Loading dock available behind building.
4 July 2024
(Center of table under power/data grommet)
File details come from the government source that posted it. Updated .