Attachment 1 - Salient Characteristics 15 May 2024.pdf
PDF 101 KB Posted
- Attached to
- FA3010Pontoon
- Solicitation number
- FA301024QTW03
About this file
This document appears to be the Salient Characteristics for a federal contract opportunity, Solicitation Number FA301024QTW03, titled "FA3010Pontoon". The solicitation is for the procurement of pontoon boats that must meet specific technical requirements, including assembly with thru-bolted construction and 3-inch thick cross-members, environmentally sealed electrical connectors, heavy-duty stainless-steel fittings, quick-release Biminis, 4-sided anodized welding, reinforced bow radius channels, and a heavy-duty rail system with drainage and drying capabilities. Each boat must be 20-23 feet in length, have a single outboard engine, a bilge pump capable of handling at least 1,000 gallons per hour, and various other detailed specifications for the hull, trailer, upholstery, fuel tank, electronics, and other components. The solicitation is being issued by the Department of the Air Force Air Education and Training Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2 - NAF Clause Set.pdf | ||
| Pontoon Boats.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
15 May 2024
Salient Characteristics
Bennington 2024 22SSR23 or Equal. Must have following features to be equal:
All boats must be assembled with ¼” thru bolted construction and 3” thick cross-members, all connectors must be (environmentally sealed electrical connectors designed for use in harsh conditions and built to be able to be disconnected and reconnected a multitude of times)
Must have heavy-duty stainless-steel fittings, Must have Quick-release Biminis, Must have 4-sided anodized welding, Must have reinforced bow radius channels, Must have heavy duty rail system with drainage & drying system and cross-channels in the bow & stern.
Each boat must have an adequate double-axle trailer.
Each boat must have an overall length of 20’-23’, Each boat must have a single outboard engine.
Each boat must have a bilge pump to handle no less than 1000gph.
Each boat must have a Hand-held, USGC & DoT approved, NaHCO3 extinguishing agent.
Each boat must have Marine grade textured vinyl formulated with advanced vinyl protection to include mildew resistance, water resistant, UV resistant, stain resistant, crack resistance to -10˚, must be able to withstand 25,000 double-rubs, at least 15 lbs. direct force before ripping, at least 35 lbs. of weight before seam slippage, dry crocking grade of 4, wet crocking weight of 3, and CPSIA compliant vinyl upholstery on furniture throughout
Each boat’s Bimini must be 100% solution dyed all weather polyester designed specifically for stress that boat covers endure. Must have urethane coating.
Each boat must have marine grade vinyl flooring.
Each boat must come with four (4) Chaise lounges.
Each boat must have a 24-gallon transom fuel tank.
Each boat must have flush mount speakers.
Each boat must have powder coated seat hinges, reclining/swivel captain/co-captain’s chairs with integrated headrest.
Each boat must have stainless steel rimmed cup holders.
Each boat must have a stowable sculpted rectangular black table.
Each boat must have a 12 Volt Receptacle, Must have console courtesy light.
Must have gauges for fuel
Must have a tachometer, 15 May 2024
Must have a trim function.
Must have a hour meter, Must have a bilge.
Must have a One-piece fiberglass console.
Must have a locking side access door.
Must have a low profile windscreen.
Must have a polished steering wheel.
Must have rocker switches with dash-mount breakers.
Must have sealed connectors.
Must have all-in-one marine rated stereo system with minimum of 6 flush mount speakers throughout boat.
Each boat must have 90 HP 4 stroke motor.
Must have anodized raised rails.
Must have a deep-step stern boarding ladder, Must have at least 6” stainless steel cleats (minimum of 4 each) and corner castings.
Must have stainless steel deck bolts (fanged elevator bolts secured with stainless steel nylock nut).
Must have surlast (equal/better) mooring cover with mooring cover quick clips.
Must have Underdeck spray deflectors.
Must have Hydraulic, tilt steering.
File details come from the government source that posted it. Updated .