Attachment 1 - Salient Characteristics 13 SEP.pdf
PDF 186 KB Posted
- Attached to
- Laser Engraver
- Solicitation number
- FA301024QTW06
About this file
This document appears to be Attachment 1 - Salient Characteristics for a Solicitation for a High-Speed Large Format Laser Engraver. The key details are:
The solicitation is for a 120W CO2 laser engraver with a 48"x36" work area, capable of engraving a variety of substrates including acrylic, metal, fabric, glass, paper, and wood. The engraver must have specific features including high-speed 165 IPS engraving, wireless/ethernet/USB connectivity, auto-focus/centering, job trace, and color mapping capabilities. It must also include exhaust venting, an air assist pump, and a comprehensive warranty. On-site setup, training for four staff, and delivery to Keesler AFB in Mississippi are required. The Solicitation Number is FA301024QTW06, issued by the Department of the Air Force Air Education and Training Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions and Answers.docx | DOCX document | |
| Attachment 2 - NAF Clauses.pdf | ||
| Combo.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Keesler Arts & Crafts Center Engraving Shop
HIGH-SPEED LARGE FORMAT LASER ENGRAVER
Salient Characteristics
13 September 2024
BRAND NAME OR EQUAL:
Fusion Pro 48 Co2 120w Epilog Laser 48 x 36 Engraver MUST have the following to be equal:
1. High-speed Co2 120W Class 2 laser engraver with 165 IPS with 5G accelerations capability and have a required power supply no more than 220-240 volts, 50 or 60 Hz, single phase.
2. Large format laser engraver with engravable work area of 48” x 36”. Equipment must be mobile, and dimensions must not exceed: width 70.6”; depth 51.3”; height 43”.
3. 120W Co2 laser for cutting a variety of substrates including acrylic, adonized metal, fabric, glass, paper, wood, etc.
4. Following attachments: Co2 2” Lense and Co2 4” Lense, rotary attachment, and chuck to accommodate odd shaped rotary substrates.
5. Wireless, ethernet, and USB print interface and must be compatible with Windows 10 or above. Engraving software must include photo engraving capability and printer driver installed.
6. The following capabilities/functions:
• built-in or overhead camera for positioning
• automatic focus/centering
• high resolution optics
• red-dot pointer
• job trace feature
• color mapping to link speed, power, frequency
• raster/vector mode
7. Exhaust ports for exterior exhaust venting and air assist pump that blows a contant stream of air across the cutting area to remove heat and combustible gases from the work area.
8. A standard comprehensive warranty for the cost of repair, parts, labor and any af�iliated charges to include travel.
9. On-site set up and on-site equipment and software training for four staff members with the option of additional staff members attending for a fee.
10. The engraver will be delivered to and installed in the Engraving Shop, Room 113, located in McBride Common, Bldg. 2222, Keesler AFB, MS 39534.
File details come from the government source that posted it. Updated .