Attachment 1 - Salient Characteristic.pdf
PDF 111 KB Posted
- Attached to
- Press Brake
- Solicitation number
- FA301026Q0027
About this file
This document is a Statement of Objectives for the procurement of one (1) Industrial Hydraulic Press Brake configured as a "Brand Name or Equal" to the AMADA HRB 8025. The contractor shall provide all equipment, freight, installation, and initial operational training. The press brake must meet or exceed specified structural and capacity baselines, including a minimum press capacity of 88 tons (800 kN), bending/bed length of 102 inches, material support of 24 inches, clearance between housings of 86 inches, stroke length of 8 inches, and open height of 14 inches with tool holders installed. The drive system must be hydraulic with minimum approach/return speed of 115 mm/sec and bending speed of 15 mm/sec with precision adjustment capability.
The machine must include control and automation features consisting of an automatic CNC crowning or natural deflection compensation system, laser-based safety system, high-speed programmable backgauge with minimum 5 axes of control (X, Delta-X, R, Z1, Z2), and a 3D-graphical CNC touchscreen controller with simplified operating modes. The tooling setup must feature a quick-change, tool-less clamping system rated for 80 to 100 tons/m and accept both EURO and American style tooling with one complete set of tool holders included. Delivery is FOB Destination to Building 3916, 303 Larcher Boulevard, Keesler Air Force Base, Mississippi 39534, with full turn-key installation including off-loading, rigging, leveling, and electrical/hydraulic commissioning. The contractor must provide a transformer if the delivered machine requires voltage different from the existing facility power of 240V, 3-phase. Training shall consist of a minimum of two days of on-site operational and safety training for up to four technicians during normal duty hours (Monday-Thursday, 6:15 a.m. to 4:15 p.m., excluding lunch hour and federal holidays). A minimum 1-year comprehensive OEM warranty covering all parts, labor, and travel is required.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - FA301026Q0027.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Requirement: Industrial Hydraulic Press Brake
The contractor shall provide all equipment, freight, installation, and initial operational training for one (1) Hydraulic Press Brake. The system must be configured as a “Brand Name or Equal” to the AMADA HRB 8025. Any equivalent press brake must meet or exceed the following structural and capacity baselines to be equal:
Salient Characteristics
A. Physical & Performance Specifications:
• Press Capacity: Minimum 88 Tons (800 kN).
• Bending/Bed Length: Minimum 102 inches.
• Material Support: Minimum 24 inch sliding front support.
• Clearance Between Housings: Minimum 86 inches.
• Stroke Length: Minimum 8 inches.
• Open Height: Minimum 14 inches with tool holders installed for tooling setup clearance.
• Throat Depth: Minimum 10 inches clearance for deep part flanges.
• Drive System: Must be a Hydraulic system.
• Approach/Return Speed: Minimum 115 mm/sec.
• Bending Speed: Minimum 15 mm/sec, precision adjustable.
B. Control & Automation Features:
• Crowning System: Must have an automatic CNC crowning or natural deflection compensation system across the entire length without manual shimming.
• Safety System: Must be equipped with laser-based safety system to immediately halt machine if interruption is detected.
• CNC Backgauge: Must be a high-speed, programmable backgauge with a minimum of 5 axes of control (X, Delta-X, R, Z1, Z2) to execute multi-step bending sequences without manual adjustment.
• Controller: Must feature a 3D-graphical CNC touchscreen controller with a simplified operating mode to enable safe operation and simulation by varying skill level personnel.
• Tooling Setup: Must have a quick-change, tool-less clamping system, rated to withstand minimum 80 tons/m and maximum 100 tons/m. Machine must be capable of accepting both EURO style and American style tooling. Must include one (1) complete set of tool holders.
C. Delivery, Installation, & Training:
• Delivery: Contractor shall deliver the equipment FOB Destination to Bldg 3916, 303 Larcher Blvd, Keesler AFB, MS 39534.
• Installation: Contractor shall provide full turn-key installation, including off-loading, rigging, leveling, and full electrical/hydraulic commissioning.
• Forklift will be necessary to offload from delivery truck and place on dock.
• Receiving dock is 4’ ft off ground and 8’ wide.
• Rollup door 8’ wide x 10’ tall.
• Machine will be roughly 100’ inside of building from door opening.
• Existing facility power is 240V, 3-phase. Vendor must provide step-up/step-down transformer if delivered machine requires different voltage (e.g., 480V).
• Training: Contractor shall provide a minimum of two (2) days of on-site operational and safety training for up to four (4) technicians upon successful installation. Training must be accomplished during normal 81 TRSS duty hours: Monday-Thursday, 6:15 a.m. – 4:15 p.m., excluding 11:00 a.m.-12:00 p.m. lunch hour and federal holidays.
D. Warranty:
• A minimum 1-year comprehensive OEM warranty covering all parts, labor, and travel is required.
| Date2_af_date: 15-Jul-26 |
| Date3_af_date: 15-Jul-26 |
File details come from the government source that posted it. Updated .