Attachment 1_Salient Characterisrics.pdf
PDF 54 KB Posted
- Attached to
- (3) Rollover Snowplows SSN
- Solicitation number
- W911S226QA042_SSN
About this file
This document is a salient characteristics specification for the procurement of up to three rollover snowplow vehicles. The vehicles must be built on a Freightliner 108SD chassis or equivalent with mechanical drive all-wheel drive and a Cummins L9 diesel engine or equivalent producing minimum 370 horsepower and 1,250 foot-pounds of torque. The transfer case must provide a minimum of 20 inches of ground clearance to accommodate belly blade installation, and the wheelbase must not exceed 180 inches. Front and rear axles must meet or exceed 20,000 and 26,000 pounds respectively, with single rear axle configuration featuring dual tires.
The snowplows must be equipped with a front-mounted rollover plow with a minimum 12-foot blade and a minimum 12-foot underbody scraper featuring power reverse angle capability, both controlled via in-cab air controls. A constant-running front-mounted gear pump is required. Lighting specifications include factory beacon lights, forward-facing HID work lights, amber snow fighter lights front-mounted, a full warning light package with heated rear strobe lights if LED, and a comprehensive work light package with heated LED lenses, reverse lights, and roof-mounted cannon lights. The vehicles must feature a stainless steel dump box for ballast management and corrosion prevention, AM/FM radio, air ride seats, front and rear tow points, and complete front and rear spare tires. Each unit requires IUID label registration in WAAF, two physical book copies of all parts/service/operators' manuals, a minimum one-year warranty on the unit, and a minimum two-year warranty on the engine, with delivery to Fort Drum, New York.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS
PURCHASE UP TO THREE ROLLOVER SNOWPLOW
MUST MEET OR EXCEED ALL CHARACTERISTICS
1. FREIGHLINER 108SD CHASSIS OR EQUIVALENT
2. MUST HAVE MECHANICAL DRIVE AWD
3. TRANSFER CASE MUST ALLOW 20 INCHES OF GROUND CLEARANCE (MINIMUM) TO
ACCOMMODATE BELLY BLADE INSTALL.
4. CUMMINS L9 DIESEL ENGINE OR EQUIVALENT
5. 370 HP WITH 1250 FT-LBS OF TORQUE (MINIMUM)
6. ALLISON AUTOMATIC TRANSMISSION WITH PTO PROVISIONS OR EQUIVLENT
7. 20K POUND MECHANICAL DRIVE FRONT AXLE (MINIMUM)
8. 26K POUND REAR AXLE (MINIMUM)
9. SINGLE REAR AXLE WITH DUAL TIRES TO LIMIT THE OVERALL WHEELBASE OF THE
TRUCK
10. 180 INCH WHEELBASE (MAXIMUM)
11. FRONT MOUNTED ROLLOVER PLOW, 12 FOOT BLADE (MINIMUM)
12. 12 FOOT (MINIMUM) UNDER BODY SCRAPER WITH POWER REVERSE ANGLE
13. CONSTANT RUNNING FRONT MOUNTED GEAR PUMP
14. IN CAB AIR CONTROLS FOR ROLLOVER AND UNDERBODY ATTACHMENT
15. MUST HAVE FACTORY BEACON LIGHTS AND FORWARD-FACING HID WORK LIGHTS
16. AMBER SNOW FIGHTER LIGHTS FRONT MOUNTED
17. FULL WARNING LIGHT PACKAGE TO INCLUDE BEACONS AND HEATED REAR STROBE
LIGHTS IF LED
18. FULL WORK LIGHT PACKAGE TO INCLUDE HEATED LEDS LENSES FOR THE UNDER
BODY SCRAPER AND REVERSE LIGHTS AS WELL AS CANNON LIGHTS ON THE ROOF
LIGHT BAR
19. STAINLESS STEEL BOX WITH DUMP CAPABILITIES TO ALLOW BALLAST TO BE
CHANGED AND BED TO BE CLEANED FOR CORROSION PREVENTION
20. AM/FM RADIO
21. AIR RIDE SEATS
22. FRONT AND REAR TOW POINTS FOR VEHICLE RECOVERY
23. COMPLETE FRONT AND REAR SPARE TIRES
24. INDIVIDUAL UNIQUE IDENTIFICATION (IUID) LABLE REGISTERED IN WAAF
25. 2 PHYSICAL BOOK COPIES OF ALL PARTS, SERVICE, AND OPERATORS’ MANUALS
26. MUST HAVE 1 YEAR WARRANTY ON UNIT EFFECTIVE FROM THE TIME OF DELIVERY
(MINIMUM)
27. MUST HAVE A 2 YEAR WARRANTY ON THE ENGINE EFFECTIVE FROM THE TIME OF
DELIVERY (MINIMUM)
28. DELIVERED TO FORT DRUM, NY
File details come from the government source that posted it. Updated .