Attachment 1 - Salient Characterisitics.pdf
PDF 761 KB Posted
- Attached to
- 36 FSS - DFAC Dishwasher (Guam) Federal contract opportunity
- Solicitation number
- FA524021Q0096
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 0001 SIGNED.pdf | ||
| RFQ Signed.pdf | ||
| Attachment 2 - DFAC Floor Plan.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
9 August 2021
SALIENT CHARACTERISTICS:
Quantity: 1 – Conveyor Type Dishwasher
.39 gallon per rack minimum 342 racks per hour minimum 2 tank with a Power Scrapper Insulated Hinged Doors Stainless steel enclosure panels Microprocessor controls with low temperature & dirty water indicators NSF Pot and Pan mode Programmable de-lime notification Power scraper vent cowl curtain kit 30 kW stainless booster Drain water tempering kit 19.5” chamber height opening (accepts sheet pans) Self-aligning wash manifolds Stainless steel anti-clogging wash arms Removable pump intake screen Electric tank heat 15kW wash/10kW rinse 30kW electric booster 240v/60/3-ph (power source) Dual Point (2) service connection standard Standard height (68 1/2 inches) Left to right operation (insert dirty dishes on left side, then go through machine and come out clean on the right) Side loader LR E-Series Standard feet (85 1/2 inches) Width 32” CURTAIN-KITSTD KIT CURT'N SPLASH Standard E-SERIES
QUANTITY: 1 – Hot Water Softener System
SALIENT CHARACTERISTICS:
0.5 cu. ft/15,000 grain capacity 5 gpm Resin tank: 27"H x 10" dia Brine tank: 26"H x 18" dia Vinylester resin tank and polyethylene brine tank 3/4 “ connection (for ware washing equipment up to 150°F)
9 August 2021
QUANTITY: 1 – Installation, Removal, and Disposal
Installation o Contractor shall install one Conveyor type dishwasher IAW Industry Standards o Contractor shall install one Hot water softener system, IAW the salient characteristics, to the proposed dishwasher IAW Industry Standards o Ensure equipment is:
Operational Properly connected to facility to include plumbing, electric, & HVAC etc.
Removal o Contractor shall remove the current dishwasher from the facility via the rear entrance Refer to DFAC Floor Plan Area (8).
o Current Dishwasher Manufacturer is Hobart, model number is CLPS86ER Disposal o Contractor shall dispose of the current dishwasher at the following address:
o Building 14529, Andersen AFB; Yigo, GU 96929
CURRENT DISHWASHER DIMENSIONS:
Length: 82 1/2 inches Width: 32 inches Height: 68 1/2 inches Weight: 800 Lb. Approximate
File details come from the government source that posted it. Updated .