Attachment 1 Roofing System SOW and Specifications.pdf

PDF 8 MB Posted Mar 30, 2022

Attached to: Roofing System Federal contract opportunity
Solicitation number: F3GHBA2080AW02
Issued by: Department of the Air Force Air Combat Command

View the file

Other files for this federal contract opportunity

Other files attached to Roofing System, newest first.
File	Type	Posted
F3GHBA2080AW02 Combo Synopsis.pdf	PDF	Mar 30, 2022
Attachment 2 Nellis_Creech IFS - Roof Systems.pdf	PDF	Mar 30, 2022
F3GHBA2080AW02 Combo Synopsis Template with clauses.pdf	PDF	Mar 30, 2022

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

STATEMENT OF WORK

FOR

RKMF 16-0026 - CNST 99 CS ITN B621

ROOFING SYSTEM

1. DESCRIPTION OF SERVICES

1.1. The contractor shall provide all personnel, equipment, tools, materials, supervision, and other items necessary to design and provide all parts for a complete standing seam metal roof (SSMR) based on the attached 90% design drawings (Attachment 1) for a concrete masonry unit (CMU) communications building as specified in the below paragraphs.

The roof system shall be assembled and installed over a CMU facility by the 820th RED HORSE Squadron at Nellis Air Force Base (AFB), Nevada.

2. REQUIREMENTS

2.1. Pre-Fabricated Joists/Trusses

2.1.1. Contractor shall provide a proposed truss system to CMU block connections identical or as similar as feasible to the attached drawing set and shall propose changes if required to ensure the performance and structural integrity of the roof system.

2.1.2. Contractor shall submit design calculations providing evidence that the roof system and CMU connections will withstand the appropriate design loads for the Nellis Air Force Base area as specified on sheet S-202 of Attachment 1 unless otherwise recommended by the engineer.

2.2. Steel Decking & Insulation

2.2.1. Roof decking shall be minimum 1.5 inch “B” Deck panels with insulation with moisture-resistant R-30 Rigid Insulation.

2.3. Roof System Accessories

2.3.1. Contractor shall provide all necessary accessories such as ridge and valley plates, saddles, cover plates, etc. to make the job complete.

2.3.2. All roof flashing shall match the color of the predominant background material and have a factory finish.

2.3.3. Contractor shall provide an additional 10 percent overage for each type of connection parts and hardware.

2.3.4. As much as possible, the contractor shall design for common bolt and hardware sizes and limit the number of different hardware sizes used throughout the roof assembly. All hardware that penetrates the exterior decking shall include a rubber washer or other waterproofing method.

2.3.5. Contractor shall provide all lightning protection items specified in the drawings

2.4. Other Roof System Requirements

2.4.1. Roof slope shall be 3/12.

2.4.2. Roof shall have 12 inch overhang on the sides of the building, as shown in attached drawings.

2.4.3. Fascia required at all truss tails and gables.

2.4.4. Soffits shall be enclosed. Soffit enclosures shall be vented.

2.4.5. Full length ridge vent required.

2.4.6. Full length Standing Seam panels with 16 inch spacing required and shall be

McElroy Medallion LOK 16”x24” Gage or equal

2.4.7. All materials shall be painted, galvanized, or otherwise protected from corrosion.

2.4.8. The color of the SSMR must match Sherwin Williams “Tawny Tan” (SW 7713) per the Installation Facilities Standard (IFS) for Nellis and Creech Air Force Bases, Nevada (Attachment 2).

2.4.9. If welding is required for roof system assembly during construction, contractor shall submit applicable welding specifications as required.

2.4.10. The contractor shall provide a warranty of 5 years for all parts manufactured.

2.4.11. The contractor shall provide full shop drawings, diagrams and applicable CAD files of how the roof system is assembled and connected, to include the LPS (see paragraph 2.6), including a bill of materials detailing each type of part and quantity.

Parts that require a particular placement or orientation (such as an end truss) shall be clearly identified.

2.5. Lightning Protecting System (LPS)

2.5.1. Contractor shall provide materials for a LPS for the facility identical or as similar to the system referenced in the attached drawings up to, but not including the grounding material.

2.5.2. The LPS will be designed in accordance with NFPA 780 using components manufactured in accordance with UL 96.

2.5.3. The LPS roof mounting systems must be approved by the roofing manufacturer.

3. DELIVERY SCHEDULE AND PERIOD OF PERFORMANCE

3.1. The complete roofing system shall be delivered to the project site at Nellis Air Force

Base August 10, 2022.

3.2. Contractor shall offload each delivery to the laydown area specified by the US Government.

3.3. Each delivery shall include a bill of materials detailing all parts being delivered. Partial deliveries shall be clearly identified as partial and shall include a bill of materials indicating the parts being delivered and the parts remaining to be delivered.

4. INSPECTION AND ACCEPTANCE

4.1. The US Government will verify that the quality of parts and match the quantity using the inventory list provided by the contractor with their proposal. Both the US Government representative and the Contractor’s designated person shall sign the inventory and keep a copy for their record.

4.2. The US Government will inspect the roof system at delivery and any components found unsatisfactory shall be replaced by the Contractor within 14 calendar days.

5. ATTACHMENTS

5.1. Attachment 1 - RKMF 16-0026 - CNST 99 CS ITN B621 90% Design Drawings

5.2. Attachment 2 – Nellis & Creech Air Force Bases Installation Facility Standards

(IFS)

820TH RED HORSE SQUADRON

RKMF 16-0026 CNST 99 CS ITN B621

NELLIS AFB, NV

LOCATION MAP

NTS

D E

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

C O

V E

H E

E T

E S

I G

G-001

CONCURRENCES

820 RHS COMMANDER

820 RHS DIRECTOR OF OPERATIONS

820 RHS ENGINEERING FLIGHT COMMANDER

820 RHS PROJECT ENGINEER

820 RHS PROJECT MANAGER

820 RHS GROUND SAFETY MANAGER

BASE CES/CEP

BASE CS REP

USING AGENCY

R K

M F

C N

S T

I T

N E

L L I

R O

C T

D R A

S M

A W

E N A M

T D

C o v e r

S h e e t d w g

O L

U M

I N

D L

A Y

M a r

T S

N A

K M

N S

I T

R S

A N

I N

C H

E S

INTERIOR ELEVATION IDENTIFIER

DETAIL IDENTIFIER

SECTION IDENTIFIER

X-X

ELEVATION IDENTIFIER

XX2XXA1

XX2XX B1

X-X

D E

P A

R T

M E

C E

S E

N E

L L

VICINITY MAP

NTS

Sheet List Table

Sheet Number Sheet Title

G-001 COVER SHEET

G-002 SHEET INDEX AND ABBREVIATIONS

G-003 HAUL ROUTE

C-101 EXISTING SITE PLAN

C-102 DEMO PLAN

C-103 PROPOSED SITE PLAN

C-104 PROPOSED GRADING PLAN

C-501 DETAILS

C-502 DETAILS

A-101 FLOOR PLAN

A-102 NEW ROOF PLAN

A-103 REFLECTED CEILING PLAN

A-201 EXTERIOR ELEVATIONS

A-501 DETAILS

A-502 DETAILS

A-301 BUILDING SECTIONS

A-601 DOOR FINISH SCHEDULE

E-001 SYMBOL & NOTES

E-002 ELECTRICAL SPECIFICATIONS

E-003 ELECRICAL SPECIFICATIONS

E-004 LIGHTING AND CABLETRAY PLAN

E-202 POWER PLAN

E-203 GROUNDING LIGHTNING PROTECTION PLAN

E-204 SYSTEM GROUNDING PLAN

E-501 DETAILS

E-502 DETAILS

E-503 DETAILS

E-601 PANE SCHEDULE

M-001 MECHANICAL SYMBOLS AND NOTES

M-002 MECHANICAL SPECIFICATIONS

M-201 MECHANICAL PLAN

M-601 SCHEDULES

P-001 PLUMBING SYMBOLS AND NOTES

P-201 PLUMBING PLAN

P-501 DETAILS

S-001 STRUCTURAL NOTES

S-002 STRUCTURAL NOTES

S-201 FOUNDATION PLAN

S-202 ROOF FRAMING PLAN

S-301 SECTIONS

S-501 DETAILS

S-502 DETAILS

S-503 FOUNDATION DETAILS

S-504 FRAMING DETAILS

FP-001 HYDRAULIC CALCULATIONS

FP-101 FIRE PROTECTION PLAN

AutoCAD SHX Text

820 RHS

AutoCAD SHX Text

C R

O N

N D

A N

D A

N S

G-002

-0

C S

B, O

T D

R A

S M

A W

E N A M

T D

G en er al .d

C O

Y 7-

M ar

-2

T S

N A

-0

- C N

N B

R S

D (2

O F

F O

R C

0T H

H O

B, N V

SHEET INDEX AND ABBREVIATIONS

SCALE: ###########

BUILDING & WALL SECTION

ELEVATION

INTERIOR ELEVATION

DETAIL (CUT LIKE A SECTION)

DETAIL (ENLARGED PLAN VIEW)

INTERIOR WALL LEGEND

EXTERIOR WALL LEGEND

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

H A

U L

O U

T E

I G

G-003

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D a u l

R o u t e d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

HAUL ROUTE

SCALE: 0.000641

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

G G

SS SS SS SS SS SS SS SS SS SS

G G

W x

Wx Wx Wx Wx Wx Wx Wx Wx Wx Wx Wx

E E

C x

CxCxCx

Cx Cx C x

C x

C R

O N

N D

G S

C-101

-0

C S

B, O

T D

R A

S M

A W

E N A M

T D

H S

H P.

C O

Y 7-

M ar

T S

N A

-0

- C N

N B

R S

D (2

O F

F O

R C

0T H

H O

B, N V

EXISTING SITE PLAN

SCALE: 1" = 20'_XREF

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

R O

PARKING LOT

Gx Cx SSx Wx

FF: 1871

C R

O N

N D

O P

C-102

-0

C S

B, O

T D

R A

S M

A W

E N A M

T D

T C

Y 7-

M ar

T S

N A

-0

- C N

N B

R S

D (2

O F

F O

R C

0T H

H O

B, N V

DEMO PLAN

SCALE: 1" = 10'_XREF

NOTES:

G G

SS SS SS SS SS SS SS SS SS SS

G G

W x

Wx Wx Wx Wx Wx Wx Wx

E E

E C x

C x

CxCxCxCxCx

Cx Cx Cx Cx

C x

Cx Cx

C x

C R

O N

N D

D S

C-103

-0

C S

B, O

T D

R A

S M

A W

E N A M

T D

H S

H P.

C O

Y 7-

M ar

T S

N A

-0

- C N

N B

R S

D (2

O F

F O

R C

0T H

H O

B, N V

PROPOSED SITE PLAN

SCALE: 1" = 30'_XREF

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

R O

PARKING LOT

ROAD

26' 48'-3"

24'

Gx Cx SSx Wx

FF: 1871

C R

O N

N D

D G

C-104

-0

C S

B, O

T D

R A

S M

A W

E N A M

T D

T C

Y 7-

M ar

T S

N A

-0

- C N

N B

R S

D (2

O F

F O

R C

0T H

H O

B, N V

PROPOSED GRADING PLAN

SCALE: 1" = 10'_XREF

NOTES:

TOOLED JOINT

TRANSVERSE EXPANSION JOINT

PLAN VIEW

NOTES:

SECTION A-A

D E

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

D E

T A

I L S

I G

C-501

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D i v i l

D e t a i l s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

DETAILS

SCALE:

SCALE: 1" = 1'-0"C-501

SIDE WALK DETAIL

0 1/2' 1' 2'

SCALE: 1 1/2" = 1'-0"C-501

DUCT BANK DETAIL

0 6" 1' 2'

SCALE: 1" = 1'-0"C-501

CURB @ GRADE DETAIL

0 1/2' 1' 2'

SCALE: 1" = 1'-0"C-501

CURB @ SIDEWALK DETAIL

0 1/2' 1' 2'

AutoCAD SHX Text

GRASS/DIRT AREA

AutoCAD SHX Text

GRASS/DIRT AREA

AutoCAD SHX Text

3500 P.S.I. CONCRETE

AutoCAD SHX Text

COMPACTED SUB-GRADE

AutoCAD SHX Text

SIDEWALK SURFACE

AutoCAD SHX Text

EXPANSION JOINT MATERIAL

AutoCAD SHX Text

1/8" RAD.

AutoCAD SHX Text

SIDEWALK

AutoCAD SHX Text

1. SIDEWALK TOOLED JOINT(TJ) (1" DEEP) SPACING SHALL BE SIDEWALK TOOLED JOINT(TJ) (1" DEEP) SPACING SHALL BE 6'-0" MAXIMUM, WITH AN EXPANSION JOINT BEING EVERY 24'. 2. AN EXPANSION JOINT(EJ) SHALL BE PLACED TO SEPARATE THE AN EXPANSION JOINT(EJ) SHALL BE PLACED TO SEPARATE THE NEW CONCRETE WALK FROM OTHER NEW OR EXISTING CONCRETE CONSTRUCTION UNLESS NOTED. 3. 4" THICK COMPACTED STONE BASE SHALL BE UNDER ALL NEW 4" THICK COMPACTED STONE BASE SHALL BE UNDER ALL NEW CONCRETE WALKS SPANNING FULL LENGTH.

AutoCAD SHX Text

2% CROSS SLOPE (TYP.)

AutoCAD SHX Text

4" THICK COMPACTED STONE BASE

AutoCAD SHX Text

EXISTING GRADE SURFACE

AutoCAD SHX Text

CONTINUOUS YELLOW (COMM) MAGNETIC MARKING TAPE

AutoCAD SHX Text

SAND OVER ALL CONDUITS. VIBRATE TO GET COMPLETE FILL UNDER CONDUIT.

AutoCAD SHX Text

4" SCHED 40 PVC CONDUITS

AutoCAD SHX Text

PROVIDE AND INSTALL CONDUIT SPACERS WITH 2" SPACING BETWEEN EACH CONDUIT.

AutoCAD SHX Text

3" STANDARD FOR ALL BASE SPACERS.

AutoCAD SHX Text

NATIVE SOIL FREE OF DELETRIOUS MATERIALS. COMPACT TO 90% PER ASTM-D-1557.

AutoCAD SHX Text

1/8"MAX.

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text 5"

AutoCAD SHX Text 18"

AutoCAD SHX Text 1"

AutoCAD SHX Text

10'-0" MAX.

AutoCAD SHX Text

BETWEEN JOINTS

AutoCAD SHX Text 6"

AutoCAD SHX Text NEW CURB TO BE 6" HIGH. TAPER TO EXISTING HEIGHT WHERE NEW MEETS EXISITNG. TAPER 2' LONG

AutoCAD SHX Text PLACE CURB ON 6" THICK LAYER OF NDOT TYPE ABC BASE COMPACTED TO 100% PER AASHTO T-99

AutoCAD SHX Text 6" AGGREGATE BASE COURSE. TYPE ABC FOR ROADS & STRUCTURES. COMPACT TO 100% PER AASHTO T-99

AutoCAD SHX Text

SUBGRADE COMPACTED TO 95% PER ASTM D 6938

AutoCAD SHX Text

GRADE

AutoCAD SHX Text

6"CONC WITH 6X6-10X10 WWF IN CENTER OF SLAB OVER 6" OF COMPACTED BASE MATERIAL

AutoCAD SHX Text WHERE THE SAWED JOINT WILL LEAVE A SECTION OF CURB & GUTTER LESS THAN FIVE (5') LINEAR FEET, THE ENTIRE SECTION OF CURB WILL BE REMOVED TO THE NEAREST JOINT.

AutoCAD SHX Text

4" THICK CONCRETE WALK WAY

AutoCAD SHX Text

12" ASPHALT IMPREGNATED FIBER EXPANSION JOINT

AutoCAD SHX Text

4' LONG PRECAST CONC WHEEL BLOCK

6"CONC WITH 6X6-10X10 WWF IN CENTER OF SLAB OVER 6" OF COMPACTED BASE MATERIAL

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

D E

T A

I L S

I G

C-502

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D i v i l

D e t a i l s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

SCALE: NOT TO SCALEC-502

ACCESSIBLE PARKING

SCALE: NOT TO SCALEC-502

CONCRETE DETAIL

SCALE: NOT TO SCALEC-502

SIDEWALK RAMP

INTERNATIONAL ACCESSIBLE SYMBOL

ACCESSIBLE PARKING SIGN

AutoCAD SHX Text

PARKING STALL

AutoCAD SHX Text

WHITE REFLECTIVE PAINT

AutoCAD SHX Text 1'-8" R

AutoCAD SHX Text 2' R

AutoCAD SHX Text 6" R

AutoCAD SHX Text

BLUE BACKGROUND

AutoCAD SHX Text

ATTACH SIGN TO POST WITH 3/8" DIA. DRIVE RIVETS, TYP.

AutoCAD SHX Text

2" DIA GALVANIZED STEEL PIPE PAINTED SILVER (OR APPROVED EQUAL)

AutoCAD SHX Text

2" DIA. I.D. PIPE SLEEVE.

AutoCAD SHX Text

PARKING

AutoCAD SHX Text

THRU BOLT TACK WELD.

AutoCAD SHX Text

A.C. PAVING.

AutoCAD SHX Text

IF USED BY OTHERS

AutoCAD SHX Text

$100 FINE

AutoCAD SHX Text N.R.S. 484.408

AutoCAD SHX Text

RESERVED

AutoCAD SHX Text

18" X 24" METAL SIGN (SEE SPECS.) (ANSI A117.1-92).

AutoCAD SHX Text 6" THICK PORTLAND CEMENT CONCRETE PAVING WITH 6X6-10X10 WWF ON 6" AGGREGATE BASE COURSE

AutoCAD SHX Text

PREPARED SOIL BASE COMPACT TO 95% PER ASTM D 6938

AutoCAD SHX Text 6" THICK AGGREGATE BASE. TYPE ABC AGGREGATE BASE COURSE. COMPACT TO 100% PER AASHTD T-99

AutoCAD SHX Text

8.0' MIN.

AutoCAD SHX Text

"A" CURB

AutoCAD SHX Text

0" MAX. LIP

AutoCAD SHX Text

1:12 MAX.

AutoCAD SHX Text

(DEPRESS "L"

AutoCAD SHX Text

CURB)

AutoCAD SHX Text

5.0' MIN.

AutoCAD SHX Text

ON DEPRESSED

AutoCAD SHX Text

"L" CURB

AutoCAD SHX Text

SIDEWALK

"A" CURB

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

F L O

L A

I G

A-101

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D l o o r

P l a n d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

FLOOR PLAN

SCALE:

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

AutoCAD SHX Text 23'-4"

AutoCAD SHX Text FLOOR PLAN KEYNOTES: 1 8"X8"X16" SPLIT FACE CMU BLOCK WALL AT EXTERIOR (NELLIS BROWN WITH MORTAR TO MATCH) 2 16'-0" X 12'-0" X 8'-0" CAST IN PLACE CONCRETE CABLE VAULT W/ MANHOLE W/ HINGED STEEL COVER AND LADDER 3 6Wx2H DUCT BANK W/ (12)-4" SCH. 40 PVC CONDUITS EXTENDING 200' TOWARD EXISTING MANHOLE SEE SHEET C-101 FOR LOCATION. 4 NOT USED . 5 (12)-4" DIA, SCHED. 40 PVC CONDUITS STUBBED OUT 10' MIN. FROM FRONT OF BUILDING. FUTURE MANHOLE CONSTRUCTION. 6 NOT USED. 7 6" THICK CONCRETE SLAB WITH #4 REBAR @ 24" EACH WAY. 8 HVAC UNIT, COORDINATE WITH MECH. DWGS. FOR SIZE LOCATION. 9 ELECTRICAL TRANSFORMER, COORDINATE WITH ELEC. DWGS. FOR SIZE AND LOCATION. 10 ELECTRICAL GENERATOR, COORDINATE WITH ELEC. DWGS. FOR SIZE AND LOCATION. 11 TRANSFORMER SWITCH, COORDINATE WITH ELEC. DWGS. FOR SIZE AND LOCATION. 12 NOT USED 13 FLOOR MOUNTED COMMUNICATION RACKS. SEE ELEC. PLANS 14 NOT USED 15 NOT USED 16 NOT USED 17 24" X 26" CABLE VAULT ENTRY HATCHED-DIAMOND TREAD PLATE-HINGED ON LONG SIDE. PROVIDE LADDER TO VAULT FLOOR. 18 3 " X 18GA MTL STUDS AT 16" O.C. TO 10' AFF " 58" X 18GA MTL STUDS AT 16" O.C. TO 10' AFF " 58" GYP. BD. INSIDE RISER ROOM, FIRE TAPED. 19 3 " METAL STUD FURRING @16" O.C. W/ R-19 BATT 58" METAL STUD FURRING @16" O.C. W/ R-19 BATT INSULATION 20 VAULT ENTRY HATCH ABOVE, SEE NOTE 17. 21 18" WIDE METAL RUNG LADDER, ATTACHED TO VAULT WALL AND VAULT FLOOR. SEE DETAIL 2/A-502 22 24" X 18" TRANSFER OPENING IN FLOOR WITH 1/2 " STEEL GRATE COVER 23 18" X 18" X 9" SUMP PIT AT FLOOR OF VAULT 24 TRANSFER OPENING ABOVE. SEE NOTE 22.

AutoCAD SHX Text 8" X 8" X 16" SPLIT FACE CMU BLOCK WALL IN RUNNING BOND PATTERN (NELLIS BROWN-STANDARD). MORTAR TO BE COLOR MATCHED. 3 "X18 GA. STEEL STUD FURRING AT 58"X18 GA. STEEL STUD FURRING AT 16" O.C. WITH FIBERGLASS BATT INSULATION

AutoCAD SHX Text 3 "X18 GA. STEEL STUD WALL FRAMING AT 16" O.C. 58"X18 GA. STEEL STUD WALL FRAMING AT 16" O.C. WIT " GYP. BD ON COMM. ROOM SIDE, AND " TYPE X 58" GYP. BD ON COMM. ROOM SIDE, AND " TYPE X 58" TYPE X DRYWALL ON FIRE RISER ROOM SIDE, TAPE ALL JOINTS, PAINT (1-COAT) (SEMI-GLOSS WHITE).

%%UWALL LEGEND

1 2

A B

D E

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

N E

O O

L A

I G

A-102

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D x t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

NEW ROOF PLAN

SCALE:

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

0 2' 4' 8'

PLAN

NORTH

SCALE: 1/4" = 1'-0"

ROOF PLAN

A-102

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-301

AutoCAD SHX Text

AutoCAD SHX Text A-301

AutoCAD SHX Text

AutoCAD SHX Text A-301

AutoCAD SHX Text

AutoCAD SHX Text A-301

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text ROOF PLAN KEYNOTES: 1 PREFINISHED STANDING SEAM METAL ROOF ON R-30 RIGID PREFINISHED STANDING SEAM METAL ROOF ON R-30 RIGID INSULATION 2 EDGE OF ROOF LINE EDGE OF ROOF LINE 3 EDGE OF WALL BELOW EDGE OF WALL BELOW 4 PRE ENGINEERED LIGHT GAUGE STEEL TRUSSESPRE ENGINEERED LIGHT GAUGE STEEL TRUSSES

GENERAL NOTES: ROOFING ASSEMBLY 1. PREFINISHED 24ga STANDING SEAM METAL ROOF SYSTEM PREFINISHED 24ga STANDING SEAM METAL ROOF SYSTEM OVER R-30 RIGID INSULATION. SEE STRUCTURAL PLANS FOR METAL ROOF DECK AND PRIMARY STEEL STRUCTURE. 2. STANDING SEAM METAL ROOF (TYP.) WIND UPLIFT: FM 1-60 STANDING SEAM METAL ROOF (TYP.) WIND UPLIFT: FM 1-60 COLOR: NELLIS STANDARD. 16" SEAM SPACING. USE FULL LENGTH PANELS. MCELROY MEDALLION LOK 16"x24 GAGE OR EQUAL.

COMM

STATION

RISER

ROOM

2 3

D E

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

R E

F L E

C T

I L I N

L A

I G

A-103

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

REFLECTED CEILING PLAN

SCALE: 1/4" = 1'-0"

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

KEYNOTES:

1 PROVIDE AND INSTALL NEW 2' X 4' FLUORESCENT LIGHT

FIXTURE.

2 LIGHT FIXTURE WITH EMERGENCY LIGHT BALLAST.

3 INSTALL NEW EXIT LIGHT.

4 INSTALL NEW WALL PACK.

5 INSTALL NEW 24"WIDE BY 6"DEEP CABLE TRAY

6 INSTALL NEW SURFACE MOUNTED LIGHT FIXTURE

7 INSTALL NEW FIRE SPRINKLER HEADS. SEE PLUMBING

PLANS.

8 INSTALL NEW 2'X2' SUPPLY DIFFUSER. SEE MECHANICAL

PLANS.

9 INSTALL NEW 24'X36" RETURN REGISTER. SEE MECHANICAL

PLANS.

10 24" x 36" CABLE VAULT ENTRY HATCH-DIAMOND TREAD

PLATE-HINGED ON LONG SIDE.

11 24" X 18" TRANSFER DUCT WITH 1/2" STEEL GRATE COVER.

12 18" WIDE METAL RUNG LADDER, ATTACH TO VAULT FLOOR.

SEE DETAIL 2/A-502

LEDGEND:

12"X30" RETURN REGISTER

24"X24" SUPPLY REGISTER. 12"Ø

DUCT SUPPLY

2' X 4' FLUORESCENT LIGHT

FIXTURE.

2' X 4' FLUORESCENT LIGHT

FIXTURE WITH EMERGENCY LIGHT

BALLAST.

1' X 4' FLUORESCENT LIGHT

FIXTURE.

SURFACE MOUNTED LIGHT

FIXTURE

WALL MOUNTED WALL PACK

EXIT LIGHT.

0 2' 4' 6'

PLAN

NORTH

SCALE: 3/8" = 1'-0"

REFLECTED CEILING PLAN

A-103

0 2' 4' 8'

PLAN

NORTH

SCALE: 1/4" = 1'-0"

VAULT REFLECTED CEILING PLAN

A-103

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text F

AutoCAD SHX Text 24x6

(TYP.)

0 4' 8' 12'

SCALE: 1/4" = 1'-0"A-201

EXTERIOR ELEVATION

0 4' 8' 12'

SCALE: 1/4" = 1'-0"A-201

EXTERIOR ELEVATION

0 4' 8' 12'

SCALE: 1/4" = 1'-0"A-201

EXTERIOR ELEVATION

0 4' 8' 12'

SCALE: 1/4" = 1'-0"A-201

EXTERIOR ELEVATION

KEY PLAN

D E

S C

R I P

T I O

N R

E V

I S

I O

N A

P P

D D

B Y

E X

T E

R I O

L E

V A

T I O

N S

E S

I G

A-201

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D

E x t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L A

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

EXTERIOR ELEVATIONS

SCALE: ####

NOTES:

1) ALL DIMENSIONS IN FEET UNLESS SHOWN OTHERWISE

AutoCAD SHX Text KEYNOTES: 1 SPLIT FACE CMU BLOCK WALL (NELLIS BROWN) SPLIT FACE CMU BLOCK WALL (NELLIS BROWN) 2 PREFINISHED STANDING SEAM METAL ROOF PREFINISHED STANDING SEAM METAL ROOF 3 METAL DOOR - PER SCHEDULE, SHEET A-601 METAL DOOR - PER SCHEDULE, SHEET A-601 4 METAL WALL PANEL SYSTEM TO MATCH ROOF METAL WALL PANEL SYSTEM TO MATCH ROOF

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-501

AutoCAD SHX Text

AutoCAD SHX Text A-201

AutoCAD SHX Text

AutoCAD SHX Text A-201

AutoCAD SHX Text

AutoCAD SHX Text A-201

AutoCAD SHX Text

AutoCAD SHX Text A-201

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

D E

T A

I L S

I G

A-501

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

DETAILS

SCALE:

SCALE: 3" = 1'-0"A-501

EAVE DETAIL

0 1/2' 1' 2'

SCALE: 3" = 1'-0"A-501

CMU DOOR HEAD

0 3" 6" 9" 12"

SCALE: 3" = 1'-0"A-501

ROOFING SECTION

0 3" 6" 9" 12"

SCALE: 3" = 1'-0"A-501

RIDGE DETAIL

0 3" 6" 9" 12"

SCALE: 3" = 1'-0"A-501

CMU DOOR JAMB

0 3" 6" 9" 12"

SCALE: 3" = 1'-0"A-501

METAL DOOR - EXTERIOR SILL

0 3" 6" 9" 12"

AutoCAD SHX Text

NOTE: ROOF ASSEMBLY TO BE INSTALLED PER MANUFACTURERS RECOMMENDATIONS

AutoCAD SHX Text

30# FELT UNDERLAYMENT

AutoCAD SHX Text

24 GA. CLIPS

AutoCAD SHX Text

R-30 RIGID BOARD INSUL.

AutoCAD SHX Text

METAL DECKING

AutoCAD SHX Text

STRUCTURAL MEMBER

AutoCAD SHX Text

STANDING SEAM METAL ROOF

AutoCAD SHX Text

NOTE: ROOF ASSEMBLY TO BE INSTALLED PER MANUFACTURERS RECOMMENDATIONS

AutoCAD SHX Text

T-PANEL LEG

AutoCAD SHX Text

TEE-CLIP, USE (2) AT EAVE

AutoCAD SHX Text

NOTCH LEG AND FIELD FORM PANEL PAN AROUND FLASHING

AutoCAD SHX Text

30 LB FELT UNDER- LAYMENT

AutoCAD SHX Text

FASTENERS AT 20" O.C. MAX

AutoCAD SHX Text

ROOF DECK W/ RIGID INSULATION

AutoCAD SHX Text

WOOD NAILER

AutoCAD SHX Text

STEEL STUD FURRING AND INSULATION (AS OCCURS)

AutoCAD SHX Text

SEALANT

AutoCAD SHX Text

CMU WALL

AutoCAD SHX Text

METAL SOFFIT

AutoCAD SHX Text

ZEE CLOSURE (CUT FIT BETWEEN SEAMS)

AutoCAD SHX Text

CONTINUOUS BEAD OF CAULK BETWEEN ZEE CLOSURE TEE-PANEL AND SEAM

AutoCAD SHX Text RIDGE/ HIP CAP± 4"END LAPS WITH CONTINUOUS CAULK AT LAPS. POP RIVET TO ZEE CLOSURE 40" O.C. MAX.

AutoCAD SHX Text

CLIPS PER ROOF PANEL MFG

AutoCAD SHX Text

FASTENERS: MIN. 2 PER ZEE CLOSURE

AutoCAD SHX Text

STRUCTURAL MEMBER

AutoCAD SHX Text

30# FELT UNDER-LAYMENT

AutoCAD SHX Text

R-30 RIGID INSULATION

AutoCAD SHX Text

METAL DECKING

AutoCAD SHX Text

NOTE: ROOF ASSEMBLY TO BE INSTALLED PER MANUFACTURERS RECOMMENDATIONS

AutoCAD SHX Text

1-1/2" METAL B DECK

AutoCAD SHX Text

8"X8"X16" REINFORCED SPLIT FACE CMU WALL

AutoCAD SHX Text

3 5/8" METAL STUD FRM'G

AutoCAD SHX Text 5/8" GYP BOARD ON INTERIOR SIDE. USE 5/8" DRYWALL IN FIRE RISER ROOM SEE PLAN FOR LOCATIONS

AutoCAD SHX Text

R-19 INSULATION

AutoCAD SHX Text

BACKER ROD AND SEALANT

AutoCAD SHX Text

SHIM

AutoCAD SHX Text

DOOR FRAME

AutoCAD SHX Text

SEALANT

AutoCAD SHX Text

8"X8"X16" REINFORCED SPLIT FACE CMU WALL

AutoCAD SHX Text

3 5/8" METAL STUD FRM'G

AutoCAD SHX Text 5/8" GYP BOARD ON INTERIOR SIDE. USE 5/8" DRYWALL IN FIRE RISER ROOM SEE PLAN FOR LOCATIONS

AutoCAD SHX Text

R-19 INSULATION

AutoCAD SHX Text

BACKER ROD AND SEALANT

AutoCAD SHX Text

SHIM

AutoCAD SHX Text

SEALANT

AutoCAD SHX Text

DOOR FRAME

AutoCAD SHX Text

SEE STRUCT PLAN FOR REINFORCING LINTEL

AutoCAD SHX Text

DOOR

AutoCAD SHX Text

THRESHOLD SET IN MASTIC

AutoCAD SHX Text

EXTERIOR CONCRETE SLAB. SLOPE MAX. 2% AWAY FROM BUILDING

AutoCAD SHX Text

EXPANSION JOINT

CONCRETE SLAB

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

D E

T A

I L S

I G

A-502

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

DETAILS

SCALE:

SCALE: 1" = 1'-0"A-502

GABLE END DETAIL

0 1/2' 1' 2'

SCALE: 1 1/2" = 1'-0"A-502

VAULT LADDER DETAIL

0 6" 1' 2'

AutoCAD SHX Text

CMU WALL

AutoCAD SHX Text

METAL WALL PANEL SYSTEM TO MATCH ROOF

AutoCAD SHX Text

METAL SOFFIT

AutoCAD SHX Text

STRUCTURAL TRUSS SUPPORT, SEE STRUCTURAL PLANS

AutoCAD SHX Text

METAL ROOF DECKING, SEE STRUCTURAL PLANS

AutoCAD SHX Text

METAL FLASHING

AutoCAD SHX Text

3 5/8" METAL STUD

AutoCAD SHX Text

5/8" GYP BD

AutoCAD SHX Text

CONCRETE VAULT FLOOR, SEE STRUCTURAL PLANS.

AutoCAD SHX Text

1"X16" SOLID METAL LADDER SAFETY RUNGS @ 12" O.C. TYP.

AutoCAD SHX Text

2 1/2"X2" FLAT BAR

AutoCAD SHX Text

CONCRETE VAULT CEILING, SEE STRUCTURAL PLANS.

AutoCAD SHX Text

1/2"X2" METAL SIDES OF LADDER. TYP. BOTH SIDES

AutoCAD SHX Text

FLOOR MOUNT ANGLE BRACKETS WITH 9/16" DIA HOLE WELDED AND BOLTED

AutoCAD SHX Text

HOLD OPEN ARM

ACCESS HATCH

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

B U

I L D

I N

E C

T I O

N S

I G

A-301

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

BUILDING SECTIONS

SCALE:

0 4' 8' 12'

SCALE: 1/4" = 1'-0"A-201

BUILDING SECTION

0 4' 8' 12'

SCALE: 1/4" = 1'-0"A-301

BUILDING SECTION

AutoCAD SHX Text

(TYP.)

AutoCAD SHX Text A-502

AutoCAD SHX Text

KEYNOTES: 1 PREFINISHED STANDING SEAM METAL ROOF ON R-30 RIGID PREFINISHED STANDING SEAM METAL ROOF ON R-30 RIGID INSULATION ATTACHED TO METAL DECK. 2 PRE ENGINEERED METAL TRUSSES (4'-0" O.C.) PRE ENGINEERED METAL TRUSSES (4'-0" O.C.) 3 SPLIT FACE CMU BLOCK WALL (NELLIS BROWN) SPLIT FACE CMU BLOCK WALL (NELLIS BROWN) 4 3 5/8"X18GA METAL STUD FURRING. 3 5/8"X18GA METAL STUD FURRING. 5 R-19 FIBERGLASS BATT INSULATION R-19 FIBERGLASS BATT INSULATION 6 CONCRETE SLAB ON GRADE - SEE STRUCTURAL PLANS CONCRETE SLAB ON GRADE - SEE STRUCTURAL PLANS 7 CONCRETE FOOTING PER STRUCTURAL PLANS CONCRETE FOOTING PER STRUCTURAL PLANS 8 AIR SUPPLY OR RETURN DUCT, SEE MECHANICAL PLANS. AIR SUPPLY OR RETURN DUCT, SEE MECHANICAL PLANS. 9 FIRE RISER ROOM WALL EDGE BEYOND. FIRE RISER ROOM WALL EDGE BEYOND. 10 METAL DOOR - PER SCHEDULE, SHEET A-601 METAL DOOR - PER SCHEDULE, SHEET A-601 11 1 1/2" METAL DECK ATTACHED TO METAL TRUSSES 1 1/2" METAL DECK ATTACHED TO METAL TRUSSES 12 CONCRETE CABLE VAULT - 16'-0" X 12'-0" X 8'-0" CONCRETE CABLE VAULT - 16'-0" X 12'-0" X 8'-0" 13 NOT USED NOT USED 14 5/8" GYP BOARD5/8" GYP BOARD

STATION

RISER

ROOM

D E

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

D O

I S

C H

E D

U L E

I G

A-601

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D t e r i o r

E l e v a t i o n s d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

DOOR FINISH SCHEDULE

SCALE: 0.009928

DOOR SCHEDULEFINISH SCHEDULE

TYPE A TYPE B

FLUSH HM

FRAME TYPE A

MASONRY

ANCHOR

SEALANT

14GA HM FRAME

DOOR FRAME

SIZE

HARDWARE

DOOR GENERAL NOTES

F FLOOR

B BASE

R REMARKS

W WALLS

FINISH GENERAL NOTES

SCALE: NOT TO SCALEA-601

DOOR & FINISH SCHEDULE PLAN

CMU

AutoCAD SHX Text

ROOM #

AutoCAD SHX Text

DOOR #

AutoCAD SHX Text

DETAILS

AutoCAD SHX Text

DOOR FINISH

AutoCAD SHX Text

DOOR TYPE

AutoCAD SHX Text

P = PAIR

AutoCAD SHX Text

S = SINGLE

AutoCAD SHX Text

DOOR MATERIAL

AutoCAD SHX Text

SIZE

AutoCAD SHX Text

DOOR

AutoCAD SHX Text

HEAD

AutoCAD SHX Text

JAMB 1

AutoCAD SHX Text

JAMB 2

AutoCAD SHX Text

SILL

AutoCAD SHX Text

FRAME

AutoCAD SHX Text

FRAME FINISH

AutoCAD SHX Text

FRAME MATERIAL

AutoCAD SHX Text

FRAME TYPE

AutoCAD SHX Text

HARDWARE

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text P

AutoCAD SHX Text

AutoCAD SHX Text S1

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text 4/A-501

AutoCAD SHX Text 5/A-501

AutoCAD SHX Text

AutoCAD SHX Text 6/A-501

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text H-1

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text 4/A-501

AutoCAD SHX Text 5/A-501

AutoCAD SHX Text

AutoCAD SHX Text 6/A-501

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text H-2

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text

AutoCAD SHX Text S

AutoCAD SHX Text S2

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text 4/A-501

AutoCAD SHX Text 5/A-501

AutoCAD SHX Text

AutoCAD SHX Text 6/A-501

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text H-3

AutoCAD SHX Text

ROOM NUMBER

AutoCAD SHX Text

ROOM NAME

AutoCAD SHX Text

FLOOR MATERIAL

AutoCAD SHX Text

BASE MATERIAL

AutoCAD SHX Text A

AutoCAD SHX Text

WALLS

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text D

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text

CEILING MATERIAL

AutoCAD SHX Text

CELING HEIGHT

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

COMM STATION

AutoCAD SHX Text F4

AutoCAD SHX Text B2

AutoCAD SHX Text W2

AutoCAD SHX Text

AutoCAD SHX Text 11'-0"

AutoCAD SHX Text

OPEN CEILING

AutoCAD SHX Text

RISER ROOM

AutoCAD SHX Text F5

AutoCAD SHX Text

AutoCAD SHX Text W2

AutoCAD SHX Text

AutoCAD SHX Text 11'-0"

AutoCAD SHX Text

OPEN CEILING

AutoCAD SHX Text

VAULT

AutoCAD SHX Text F5

AutoCAD SHX Text

AutoCAD SHX Text W1

AutoCAD SHX Text 8'-0"

AutoCAD SHX Text MATERIAL WD WOOD WOOD AL/GL ALUMINUM / GLASS ALUMINUM / GLASS HM HOLLOW METAL HOLLOW METAL FINISH SCF STAIN & CLEAR FINISH STAIN & CLEAR FINISH P PAINT PAINT F FACTORY FACTORY

AutoCAD SHX Text MATERIAL AL ALUMINUM ALUMINUM TS TIMELY STEEL FRAME TIMELY STEEL FRAME HM 14GA. HOLLOW METAL 14GA. HOLLOW METAL FINISH P PAINTPAINT

AutoCAD SHX Text S2 3'-0" X 7'-0"3'-0" X 7'-0"

AutoCAD SHX Text H-1 FLUSH BOLTS TOP AND BOTTOM ON BOTH FLUSH BOLTS TOP AND BOTTOM ON BOTH LEAVES, NO ACCESS FROM OUTSIDE, 3 PAIR HINGES 2 CLOSERS WITH HOLD OPEN, WEATHER STRIP, THRESHOLD. INTRUSION BAR AT ROOM SIDE ACROSS DOUBLE DOORS & FRAME H-2 1 LEVER HANDLE LOCKSET WITH 7 PIN 1 LEVER HANDLE LOCKSET WITH 7 PIN CIPHER LOCK ALWAYS OPENABLE FROM INSIDE 1 PR HINGES, WEATHER STRIP, 12 PR HINGES, WEATHER STRIP, THRESHOLD H-3 1 LEVER HANDLE LOCKSET, 1 PR HINGES, 1 LEVER HANDLE LOCKSET, 1 PR HINGES, 12 PR HINGES, WEATHER STRIP, THRESHOLD

AutoCAD SHX Text EXIT DOORS SHALL BE OPERABLE FROME THE INSIDE WITHOUT THE USE OF A KEY OR SPECIAL KNOWLEDGE OR EFFORT. FIRE RATED DOORS AND FRAMES SHALL HAVE AN APPROVED LABEL. PROVIDE 3 SILENCERS AT SINGLE DOORS AND 2 SILENCERS AT PAIR OF DOORS

AutoCAD SHX Text F4 VPI ANTI-STATIC VINYL TILE 12"X12" VPI ANTI-STATIC VINYL TILE 12"X12" F5 CONCRETE (NO FINISH)CONCRETE (NO FINISH)

AutoCAD SHX Text

B2 RUBBER 4" HIGHRUBBER 4" HIGH

AutoCAD SHX Text

AutoCAD SHX Text W1 EXPOSED CONCRETE( NO FINISH) EXPOSED CONCRETE( NO FINISH) W2 5/8" TYPE 'X' GYPSUM BOARD TAPED, SANDED AND 5/8" TYPE 'X' GYPSUM BOARD TAPED, SANDED AND PAINTED

AutoCAD SHX Text

1. INTERIOR FINISH MATERIALS TO COMPLY WITH IBC SECTION INTERIOR FINISH MATERIALS TO COMPLY WITH IBC SECTION 1210. 2. GYPSUM BOARD TO BE 5/8" TYPE "X" UNLESS NOTED GYPSUM BOARD TO BE 5/8" TYPE "X" UNLESS NOTED OTHERWISE. (PAINT WITH SEMI-GLOSS WHITE, 1 COAT PRIMER, 1 FINISH COAT)

AutoCAD SHX Text

S1 6'-0" X 7'-0" PR6'-0" X 7'-0" PR

AT JAMB 4" AT HEAD

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

S Y

M B

E S

I G

E-001

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D e c t r i c a l d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

SYMBOL & NOTES

SCALE: ###########

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

1. VERIFY EXISTING SITE CONDITIONS, SERVICE REQUIREMENTS (ELECTRICAL, T.V., AND TELEPHONE) AND VERIFY EXISTING SITE CONDITIONS, SERVICE REQUIREMENTS (ELECTRICAL, T.V., AND TELEPHONE) AND EXACT LOCATIONS OF SERVICE FACILITIES BEFORE SUBMITTING BID. SUBMITTAL OF BID INDICATES CONTRACTOR IS COGNIZANT OF ALL JOB SITE CONDITIONS, ACTUAL PHYSICAL LOCATIONS, AND WORK TO BE PERFORMED. 2. CONTRACTOR SHALL PROVIDE ALL LABOR, MATERIALS, INSURANCE, EQUIPMENT, INSTALLATION, CONTRACTOR SHALL PROVIDE ALL LABOR, MATERIALS, INSURANCE, EQUIPMENT, INSTALLATION, CONSTRUCTION TOOLS, TRANSPORTATION, ETC. FOR A COMPLETE AND PROPERLY OPERATING ELECTRICAL SYSTEM. 3. ELECTRICAL CONTRACTOR SHALL SECURE ALL NECESSARY PERMITS. COORDINATE FOR ALL TEMPORARY ELECTRICAL CONTRACTOR SHALL SECURE ALL NECESSARY PERMITS. COORDINATE FOR ALL TEMPORARY ELECTRICAL SERVICE WITH THE AIR STATION UTILITIES DEPARTMENT. COORDINATE TEMPORARY CONSTRUCTION REQUIREMENTS WITH ALL TRADES PRIOR TO CONSTRUCTION. 4. THESE PLANS ARE DIAGRAMMATIC ONLY, FOLLOW AS CLOSELY AS POSSIBLE AND REFER TO THESE PLANS ARE DIAGRAMMATIC ONLY, FOLLOW AS CLOSELY AS POSSIBLE AND REFER TO ARCHITECTURAL DRAWINGS FOR DETAILS, STRUCTURAL DETAILS, EXACT EQUIPMENT AND OUTLET LOCATIONS. ALTHOUGH NOT SHOWN, CONTRACTOR SHALL PROVIDE ALL J-BOXES, PULL BOXES, ELLS, OFFSETS ETC., FOR A COMPLETE CODE APPROVED INSTALLATION. FOOTAGES SHOWN ON ELECTRICAL SINGLE LINES AND RISER DIAGRAMS ARE FOR CALCULATION PURPOSES ONLY, AND ARE NOT FOR MATERIAL TAKEOFF. ALL LOCATIONS OF EVERY OUTLET SHALL BE VERIFIED PRIOR TO ROUGH-IN. 5. THE CONNECTION METHOD OF VARIOUS APPLIANCES IS SHOWN AS A RECEPTACLE, AND IS FOR LOCATION THE CONNECTION METHOD OF VARIOUS APPLIANCES IS SHOWN AS A RECEPTACLE, AND IS FOR LOCATION PURPOSES. THIS CONTRACTOR SHALL COORDINATE AND PROVIDE, FROM ACTUAL SHOP DRAWINGS, THE CONNECTION SHOWN ON THOSE DRAWINGS. 6. EACH CONDUCTOR OF EVERY SYSTEM SHALL BE PERMANENTLY TAGGED IN COMPLIANCE WITH OSHA. EACH CONDUCTOR OF EVERY SYSTEM SHALL BE PERMANENTLY TAGGED IN COMPLIANCE WITH OSHA. 7. ALL MATERIALS SHALL BE NEW, AND OF THE SAME MANUFACTURER FOR EACH CLASS OR GROUP OF ALL MATERIALS SHALL BE NEW, AND OF THE SAME MANUFACTURER FOR EACH CLASS OR GROUP OF EQUIPMENT. MATERIALS SHALL BE LISTED AND APPROVED BY UNDERWRITER'S LABORATORIES FOR THE USE AND ENVIRONMENT, AND SHALL BEAR THE INSPECTION LABEL WHERE SUBJECT TO SUCH APPROVAL. MATERIALS SHALL MEET WITH THE APPROVAL OF THE DIVISION OF INDUSTRIAL SAFETY, AND ALL GOVERNING BODIES HAVING JURISDICTION. MATERIALS SHALL BE MANUFACTURED IN ACCORDANCE WITH APPLICABLE STANDARDS ESTABLISHED BY A.N.S.I., U.L., N.E.M.A. AND N.B.F.U. INSTALL PER MANUFACTURERS' RECOMMENDATIONS. 8. SUBSTITUTIONS OF SPECIFIED MATERIALS ARE IN ACCORDANCE WITH THE GENERAL CONDITIONS OF THE SUBSTITUTIONS OF SPECIFIED MATERIALS ARE IN ACCORDANCE WITH THE GENERAL CONDITIONS OF THE RFP. APPROVAL OF EQUAL MATERIALS PRIOR TO BID ARE BY WRITTEN ADDENDUM ONLY OR AS STATED ON THE PLANS. 9. (NOT USED) (NOT USED) 10. CONTRACTOR SHALL PERFORM HIS WORK IN ACCORDANCE WITH UNIFIED FACILITIES CRITERIA (UFC) CONTRACTOR SHALL PERFORM HIS WORK IN ACCORDANCE WITH UNIFIED FACILITIES CRITERIA (UFC) MANUALS, THE NATIONAL ELECTRIC CODE AND THE APPLICABLE INTERNATIONAL BUILDING CODE. 11. THE COMPLETE ELECTRICAL SYSTEM SHALL BE GROUNDED IN ACCORDANCE WITH THE PRESENTLY THE COMPLETE ELECTRICAL SYSTEM SHALL BE GROUNDED IN ACCORDANCE WITH THE PRESENTLY ADOPTED EDITION OF THE N.E.C., ART. #250. 12. PENETRATIONS TO FIRE-RATED MATERIALS SHALL BE RESTORED TO EQUAL RATING AS REQUIRED BY PENETRATIONS TO FIRE-RATED MATERIALS SHALL BE RESTORED TO EQUAL RATING AS REQUIRED BY LOCAL ENFORCING AGENCY. FLAME SEAL AS MANUFACTURED BY NELSON ELECTRIC (PH. NO. 213-445-1774 MR. HARRIS) OR EQUAL. 13. CONDUCTORS SHALL BE CODE GRADE, 600 VOLT CLASS, COPPER, MARKED 24" ALONG IT'S LENGTH CONDUCTORS SHALL BE CODE GRADE, 600 VOLT CLASS, COPPER, MARKED 24" ALONG IT'S LENGTH SHOWING MANUFACTURER'S NAME, MAXIMUM ALLOWABLE VOLTAGE AND SIZE. CONDUCTORS SHALL BE TYPE "THWN" (WET) OR "THHN" (DRY). DELIVER THE WIRE TO THE SITE IN UNBROKEN PACKAGES. 14. ALL CONDUIT SHALL BE INSTALLED CONCEALED WHERE PHYSICALLY POSSIBLE. ALL CONDUIT SHALL BE INSTALLED CONCEALED WHERE PHYSICALLY POSSIBLE. 15. ALL CONDUIT ONLY (C.O.) SHALL HAVE A 3/16" PULL WIRE OR ROPE. ALL CONDUIT ONLY (C.O.) SHALL HAVE A 3/16" PULL WIRE OR ROPE. 16. USE ONLY COMPETENT AND SKILLED PERSONNEL AND PERFORM ALL WORK, INCLUDING AESTHETIC AS USE ONLY COMPETENT AND SKILLED PERSONNEL AND PERFORM ALL WORK, INCLUDING AESTHETIC AS WELL AS ELECTRICAL AND MECHANICAL ASPECTS TO STANDARDS CONSISTENT WITH THE BEST PRACTICES OF THE TRADE. 17. PROVIDE MAIN UNDERGROUND PULL SECTION, METERING, MAIN DISCONNECT DEVICE, DISTRIBUTION PROVIDE MAIN UNDERGROUND PULL SECTION, METERING, MAIN DISCONNECT DEVICE, DISTRIBUTION SECTION(S) AND BRANCH CIRCUIT LOAD CENTERS WITH RATINGS, COMPONENTS AND FEATURES IN STRICT ACCORDANCE WITH THE ELECTRICAL DRAWINGS AND SPECIFICATIONS. 18. PROVIDE ALL LAMPS, HANGERS AND SEISMIC SUPPORTS PER UFC MANUALS, LENSES, ETC., FOR A COMPLETE LIGHTING FIXTURE. 19. WHERE IT BECOMES NECESSARY TO DRILL INTO OR CUT THROUGH ANY EXISTING FLOORS, WALLS OR WHERE IT BECOMES NECESSARY TO DRILL INTO OR CUT THROUGH ANY EXISTING FLOORS, WALLS OR CEILINGS TO PERMIT THE INSTALLATION OF ANY WORK UNDER THIS CONTRACT, OR TO REPAIR ANY DEFECTS SUCH CUTTING AND PATCHING SHALL MATCH EXISTING OR NEW ADJACENT SURFACE. 20. ELECTRICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL POWER, CONTROL WIRES, CONDUITS AND ELECTRICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL POWER, CONTROL WIRES, CONDUITS AND OUTLETS TO RENDER MECHANICAL EQUIPMENT OPERATIVE. REFER TO MECHANICAL DRAWINGS FOR CONTROL SCHEMATICS. 21. PROVIDE NAME PLATES FOR ALL MAJOR PIECES OF EQUIPMENT. PROVIDE NAME PLATES FOR ALL MAJOR PIECES OF EQUIPMENT. 22. PROVIDE ONE SPARE SET OF EACH SIZE AND TYPE OF FUSE INSTALLED ON THIS PROJECT. PROVIDE ONE SPARE SET OF EACH SIZE AND TYPE OF FUSE INSTALLED ON THIS PROJECT. 23. PROVIDE ONE (1) SET OF COMPLETE ELECTRICAL "AS-BUILTS" REPRODUCIBLE DRAWINGS AT THE PROVIDE ONE (1) SET OF COMPLETE ELECTRICAL "AS-BUILTS" REPRODUCIBLE DRAWINGS AT THE COMPLETION OF THE JOB, SHOWING ALL LOCATIONS. ALL BROCHURES, OPERATING MANUALS, CATALOGS, ETC. SHALL BE TURNED OVER AT JOB COMPLETION. 24. (NOT USED) (NOT USED) 25. WHERE A CONFLICT OCCURS BETWEEN THESE NOTES AND ELECTRICAL SPECIFICATION ISSUED AS A PART WHERE A CONFLICT OCCURS BETWEEN THESE NOTES AND ELECTRICAL SPECIFICATION ISSUED AS A PART OF THESE DOCUMENTS, THE MORE STRINGENT REQUIREMENT SHALL PREVAIL. 26. CONTRACTOR SHALL FURNISH AND INSTALL ON PANEL BOARDS SUPPLYING FIRE ALARM EQUIPMENT: A CONTRACTOR SHALL FURNISH AND INSTALL ON PANEL BOARDS SUPPLYING FIRE ALARM EQUIPMENT: A LOCKABLE COVER, CIRCUIT BREAKER IDENTIFICATIONS (RED) AND A CIRCUIT BREAKER LOCK-OFF DEVICE.

AutoCAD SHX Text F

AutoCAD SHX Text S

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text F

AutoCAD SHX Text J

AutoCAD SHX Text

MANUAL FIRE ALARM PULL STATION

AutoCAD SHX Text

HORN/STROBE - FLUSH MTD. UNLESS OTHERWISE NOTED

AutoCAD SHX Text

FIRE ALARM HORN/STROBE

AutoCAD SHX Text

F.A. SMOKE DETECTOR STATION (WITH

AutoCAD SHX Text

INDICATES POLYCARBONATE GUARD

AutoCAD SHX Text

FIRE ALARM TRANSCEIVER

AutoCAD SHX Text

FLOW SWITCH

AutoCAD SHX Text

TAMPER PROOF SWITCH

AutoCAD SHX Text

REMOTE PILOT WHEN CONCEALED)

AutoCAD SHX Text

FAT

AutoCAD SHX Text

WIRE SIZE (CONDUIT SIZE AS NOTED OR REQ'D.)

AutoCAD SHX Text

DOOR LOCK RELEASE ELECTRIC STRIKE PLATE

AutoCAD SHX Text

PATRON DIRECTOR PUSH-BUTTON SWITCH AT CHECKOUT STAND

AutoCAD SHX Text

PUSH-BUTTON CONTROL STATION. LETTERS DESIGNATE SYSTEM

AutoCAD SHX Text

ELECTRIC POWER UNDERGROUND CONDUITS

AutoCAD SHX Text

WIREMOLD PROVIDED AND INSTALLED BY E.C.

AutoCAD SHX Text

FURNITURE SYSTEM ELECTRIC WIREWAY. PROVIDED BY G.C.

AutoCAD SHX Text

PLUGMOLD PROVIDED AND INSTALLED BY E.C.

AutoCAD SHX Text

HEAT TAPE (BY EC 10 WATTS/12") IN 3/4" CONDUIT EMBEDDED

AutoCAD SHX Text

MAIN DISTRIBUTION OR POWER PANELBOARDS

AutoCAD SHX Text

FLUSH OR SURFACE MOUNTED BRANCH PANELBOARDS

AutoCAD SHX Text

ELECTRIC MOTOR OUTLET - VERIFY EXACT LOCATION,

AutoCAD SHX Text

JUNCTION BOX OR PULL BOX - SIZE AS NOTED OR REQ'D BY NEC

AutoCAD SHX Text

CONTACTS, HOA, PB, PILOT AND CONTROL XFRMR

AutoCAD SHX Text

MOTOR CONTROLLER - COMPLETE WITH AUXILIARY

AutoCAD SHX Text

SPECIAL WIRING AS DENOTED: T=TELEPHONE, ETC.

AutoCAD SHX Text ALL CONDUIT RUNS SHOWN ARE DIAGRAMMATIC. THE NUMBER OF WIRES SHOWN IN ANY CONDUIT SHALL NOT BE INTERPRETED TO BE THE EXACT QUANTITIES REQUIRED. THE WIRES ARE SHOWN AS A GUIDELINE ONLY.

AutoCAD SHX Text

WIRED BY E.C.

AutoCAD SHX Text

WIRING TURNED DOWN

AutoCAD SHX Text

EQUIPMENT OR SERVICE GROUND

AutoCAD SHX Text

IN FREEZER CURB%%001. SEE ARCH. SHEETS

AutoCAD SHX Text

WIRING TURNED UP

AutoCAD SHX Text

CABLE TRAY

AutoCAD SHX Text

DISCONNECT SWITCH

AutoCAD SHX Text

HORSEPOWER, PHASE, ETC.

AutoCAD SHX Text

UNDER FLOOR DUCTS

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

FIRE ALARM ANNUNCIATOR PANEL

AutoCAD SHX Text

FIRE ALARM CONTROL PANEL

AutoCAD SHX Text

"PANIC" BUTTON - MUSHROOM TYPE

AutoCAD SHX Text

FACP

AutoCAD SHX Text

FAAP

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text C/T

AutoCAD SHX Text

UFD

AutoCAD SHX Text

AutoCAD SHX Text J

AutoCAD SHX Text

POSITION SWITCH

AutoCAD SHX Text

WIRING EXPOSED

AutoCAD SHX Text

BRANCH CIRCUIT HOME RUN

AutoCAD SHX Text

PANEL MARK AND CIRCUIT NUMBERS

AutoCAD SHX Text

GROUND WIRE (WHERE REQUIRED)

AutoCAD SHX Text

SPECIALIZED CIRCUIT POWER%%001.

AutoCAD SHX Text

WIRING CONCEALED IN OR UNDER FLOOR

AutoCAD SHX Text

WIRING CONCEALED IN CEILING OR WALL

AutoCAD SHX Text A-2

AutoCAD SHX Text

AutoCAD SHX Text #8

AutoCAD SHX Text

F.A. DUCT SMOKE DETECTOR STATION (WITH

AutoCAD SHX Text

REMOTE PILOT WHEN CONCEALED)

AutoCAD SHX Text

EXTERIOR HORN

AutoCAD SHX Text CABLE TRAY. SIZE AS INDICATED ON PLANS. CABLE TRAY TO BE STEEL, LADDER TYPE WITH 6" RUNG SPACING. B-LINE SERIES 476 OR EQUAL.

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text

SYMBOLS AND ABBREVIATIONS

AutoCAD SHX Text NOTE: 1. THIS IS A GENERAL SYMBOLS AND THIS IS A GENERAL SYMBOLS AND ABBREVIATION LIST. SOME SYMBOLS AND ABBREVIATIONS MAY NOT BE SHOWN ON DRAWINGS.

AutoCAD SHX Text

AutoCAD SHX Text PROVIDE DUAL CAT 5E CABLES & OUTLET w/(2) CAT 5E RJ-45 JACKS

AutoCAD SHX Text

COMBINATION FLUSH FLOOR TYPE TELEPHONE AND

AutoCAD SHX Text

NEMA NUMBER DETERMINES; VOLTAGE, POLES, WIRES,

AutoCAD SHX Text

PENDENT RECEPTACLE (SEE DETAIL SHEETS)

AutoCAD SHX Text

PHASE AND CONFIGURATION

AutoCAD SHX Text

SPECIAL PURPOSE OUTLET:

AutoCAD SHX Text

AMPERE RATING

AutoCAD SHX Text

DUPLEX OUTLETS

AutoCAD SHX Text

PUBLIC TELEPHONE OUTLET - AC (ABOVE COUNTER) W (WALL)

AutoCAD SHX Text

WALL MOUNTED, CABLES TO RUN TO TELEPHONE TERMINAL BOARD.

AutoCAD SHX Text

WALL MOUNTED, CABLES TO RUN TO TELEPHONE TERMINAL BOARD.

AutoCAD SHX Text

TELEPHONE/INTERCOM OUTLET - AC (ABOVE COUNTER) W (WALL)

AutoCAD SHX Text

COMPUTER OUTLET - AC (ABOVE COUNTER) W (WALL)

AutoCAD SHX Text

WALL MOUNTED, CABLES TO RUN TO NEAREST ISP RACK AT

AutoCAD SHX Text

SUB HUB OR COMO RACK.

AutoCAD SHX Text

MOUNTED, CABLES TO RUN TO NEAREST ISP RACK AT SUB HUB OR

AutoCAD SHX Text

COMO RACK. NEXT TO THE DATA OUTLETS PROVIDE AND MOUNT

AutoCAD SHX Text

MATCH THE SURROUNDING DECOR.

AutoCAD SHX Text

A 3/4" PLYWOOD BACKBOARD 12" HIGH AND 12" WIDE. THE

AutoCAD SHX Text

BACKBOARD SHALL HAVE A SMOOTH FINISH WITH THE EXPOSED

AutoCAD SHX Text

EDGES BEVELED. THE BACKBOARD SHALL BE PAINTED TO

AutoCAD SHX Text

RF WIRELESS POS-M-DATA TRANSMITTER POINT. PROVIDE DUAL

AutoCAD SHX Text CAT 5E CABLES & OUTLET w/(2) CAT 5E RJ-45 JACKS WALL

AutoCAD SHX Text

OCCUPANCY SENSOR W/RELAY

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text C

AutoCAD SHX Text 30A

AutoCAD SHX Text 6-20

AutoCAD SHX Text

GOVERNMENT FURNISHED CONTRACTOR INSTALLED

AutoCAD SHX Text

CONTRACTOR FURNISHED CONTRACTOR INSTALLED

AutoCAD SHX Text

ELECTRICAL CONTRACTOR

AutoCAD SHX Text

FRACTIONAL HORSEPOWER

AutoCAD SHX Text

ELECTRIC WATER COOLER

AutoCAD SHX Text

ON CENTER

AutoCAD SHX Text

NIGHT LIGHT

AutoCAD SHX Text

PILOT LIGHT

AutoCAD SHX Text

ISOLATED GROUND

AutoCAD SHX Text

GENERAL CONTRACTOR

AutoCAD SHX Text

EXTERIOR

AutoCAD SHX Text

ABOVE FINISHED GRADE

AutoCAD SHX Text

ABOVE CEILING

AutoCAD SHX Text

ABOVE COUNTER

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

MANUAL TRANSFER SWITCH

AutoCAD SHX Text

AUTOMATIC TRANSFER SWITCH

AutoCAD SHX Text

MOUNTED HORIZONTALLY 18" AFG EXT.

AutoCAD SHX Text

MOUNTED UNDER ONE COVERPLATE

AutoCAD SHX Text

DUPLEX RECEPTACLE OUTLET AND TELEPHONE OUTLET

AutoCAD SHX Text

ISOLATED GROUND DUPLEX RECEPTACLE

AutoCAD SHX Text

SPECIAL PURPOSE FLUSH FLOOR OUTLET AS NOTED

AutoCAD SHX Text

DENOTES: HP/VOLTAGE/PHASE (OR KW/VOLTAGE/PHASE)

AutoCAD SHX Text

ISOLATED GROUND QUAD RECEPTACLE

AutoCAD SHX Text

TELEPHONE TERMINAL CABINET

AutoCAD SHX Text

DUPLEX GFI RECEPTACLE

AutoCAD SHX Text

WEATHERPROOF WHILE IN USE.

AutoCAD SHX Text

FLUSH CEILING OUTLET

AutoCAD SHX Text

QUADPLEX RECEPTACLE

AutoCAD SHX Text

DUPLEX RECEPTACLE

AutoCAD SHX Text

SINGLE RECEPTACLE

AutoCAD SHX Text

UNLESS NOTED OTHERWISE

AutoCAD SHX Text

TRANSFORMER

AutoCAD SHX Text

WEATHERPROOF

AutoCAD SHX Text

OCCUPANCY SENSOR SWITCH

AutoCAD SHX Text

KEYED SWITCH

AutoCAD SHX Text

FOUR-WAY SWITCH

AutoCAD SHX Text

THREE-WAY SWITCH

AutoCAD SHX Text

SINGLE POLE SWITCH

AutoCAD SHX Text

CEILING FAN SPEED CONTROLLER

AutoCAD SHX Text

TT SWITCH

AutoCAD SHX Text

INDICATES WIRE GUARD

AutoCAD SHX Text

TELEPHONE TERMINAL BOARD

AutoCAD SHX Text

RIGID METAL STEEL

AutoCAD SHX Text

REFRIGERATION MONITORING CONTROL SYSTEM

AutoCAD SHX Text

MTS

AutoCAD SHX Text K

AutoCAD SHX Text

AutoCAD SHX Text P

AutoCAD SHX Text

TTC

AutoCAD SHX Text

RMS

AutoCAD SHX Text

TTB

AutoCAD SHX Text

UNO

AutoCAD SHX Text

XFRMR

AutoCAD SHX Text

RMCS

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text

AutoCAD SHX Text 10/208/3

AutoCAD SHX Text

AFF

AutoCAD SHX Text

AFG

AutoCAD SHX Text

CFCI

AutoCAD SHX Text

ACLG

AutoCAD SHX Text

ATS

AutoCAD SHX Text

EWC

AutoCAD SHX Text

(EX)

AutoCAD SHX Text

FHP

AutoCAD SHX Text

EXT

AutoCAD SHX Text

GFGI

AutoCAD SHX Text

WALL MOUNTED HID OR INCANDESCENT FIXTURE

AutoCAD SHX Text

FLUORESCENT CEILING SURFACE OR RECESSED MOUNTED

AutoCAD SHX Text

EXIT LIGHT

AutoCAD SHX Text

LIGHT FIXTURE ON EMERGENCY CIRCUIT

AutoCAD SHX Text

FIXTURE

AutoCAD SHX Text

DIRECTIONAL OCCUPANCY SENSOR W/ DUAL RELAYS

AutoCAD SHX Text

GFI

AutoCAD SHX Text S

S C

R I P

T I O

N R

E V

I S

I O

N D

A T

E A

P P

D D

B Y

E L E

C T

R I C

A L

P E

C I F

I C

A T

I O

N S

I G

E-002

R K

C N

I T

N E

L L

C T

D R A

S M

A W

E N A M

T D e c t r i c a l d

O L

U M

I N

D L

A Y

M a r

T S

N A

N S

I T

R S

A N

I N

C H

E S

D E

P A

R T

M E

C E

S E

N E

L L

ELECTRICAL SPECIFICATIONS

SCALE: ###########

AutoCAD SHX Text

ELECTRICAL SPECIFICATIONS

AutoCAD SHX Text

1.0. GENERAL GENERAL 1.0.1. THE ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR THE ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR COORDINATING THE COMPLETE ELECTRICAL INSTALLATION FOR THE PROJECT. 1.1. REGULATORY REQUIREMENTS REGULATORY REQUIREMENTS 1.1.1. NATIONAL ELECTRICAL CODE, NEC (LATEST ADOPTED EDITION): NATIONAL ELECTRICAL CODE, NEC (LATEST ADOPTED EDITION): 1.1.1.1. COMPLY WITH NEC/NFPA NO. 70, FOR CONSTRUCTION AND COMPLY WITH NEC/NFPA NO. 70, FOR CONSTRUCTION AND INSTALLATION OF BASIC MATERIALS. 1.1.1.2. NEC 300-21: WIRING METHODS; SPREAD OF FIRE OR NEC 300-21: WIRING METHODS; SPREAD OF FIRE OR PRODUCTS OF COMBUSTION. 1.1.2. UNDERWRITER'S LABORATORIES, UL: UNDERWRITER'S LABORATORIES, UL: 1.1.2.1. ALL BASIC MATERIALS LISTED AND LABELED BY UL. ALL BASIC MATERIALS LISTED AND LABELED BY UL. 1.2. REFERENCED REFERENCED 1.2.1. AMERICAN NATIONAL STANDARDS INSTITUTE, ANSI: AMERICAN NATIONAL STANDARDS INSTITUTE, ANSI: 1.2.1.1. C80.3: SPECIFICATION FOR ELECTRICAL METALLIC TUBING, C80.3: SPECIFICATION FOR ELECTRICAL METALLIC TUBING, SPECIFICATION FOR ELECTRICAL METALLIC TUBING, ZINC COATED. 1.2.2. NATIONAL ELECTRICAL MANUFACTURER'S ASSOCIATION, NEMA: NATIONAL ELECTRICAL MANUFACTURER'S ASSOCIATION, NEMA: 1.2.2.1. ENCLOSURES: PUBLICATION 250. ENCLOSURES: PUBLICATION 250. 1.2.2.1.1. TYPE 1: INDOOR USE, ATMOSPHERIC TYPE 1: INDOOR USE, ATMOSPHERIC CONDITIONS NORMAL. 1.2.2.1.2. TYPE 3R: OUTDOOR USE, RAINTIGHT TYPE 3R: OUTDOOR USE, RAINTIGHT 1.2.3. UNDERWRITER'S LABORATORIES, UL UNDERWRITER'S LABORATORIES, UL 1.3. SUBMITTALS SUBMITTALS 1.3.1. SHOP DRAWINGS: SHOP DRAWINGS: 1.3.1.1. SUBMIT DRAWINGS FOR: SUBMIT DRAWINGS FOR: 1.3.1.1.1. LIGHTING FIXTURES. LIGHTING FIXTURES. 1.3.1.1.2. WIRING DEVICES. WIRING DEVICES. 1.3.1.1.3. FIRE ALARM SYSTEM. FIRE ALARM SYSTEM. 1.3.1.1.4. PANELBOARD. PANELBOARD. 1.3.1.1.5. GENERATOR GENERATOR 1.3.1.1.6. AUTOMATIC TRANSFER SWITCH AUTOMATIC TRANSFER SWITCH 1.3.1.1.7. MANHOLES. MANHOLES. 1.3.1.1.8. VAULTS. VAULTS. 1.3.1.1.9. CABLE TRAY CABLE TRAY 1.4. PROJECT RECORD DOCUMENTS PROJECT RECORD DOCUMENTS 1.4.1. ACCURATELY RECORD ACTUAL LOCATIONS AND WIRING METHODS AND ACCURATELY RECORD ACTUAL LOCATIONS AND WIRING METHODS AND "AS-BUILT" RECORD DOCUMENTS. 1.4.2. SUBMIT FOR ARCHITECT'S REVIEW. SUBMIT FOR ARCHITECT'S REVIEW. 1.5. DRAWINGS AND SPECIFICATIONS DRAWINGS AND SPECIFICATIONS 1.5.1. WITH THE EXCEPTION OF SYSTEMS AND EQUIPMENT FURNISHED BY WITH THE EXCEPTION OF SYSTEMS AND EQUIPMENT FURNISHED BY OTHERS, IT IS INTENDED THAT WORK COVERED BY SPECIFICATIONS AND DRAWINGS INCLUDES SYSTEMS COMPLETE AND OPERATIVE, IRRESPECTIVE OF WHETHER OR NOT EVERY ITEM IS SPECIFICALLY SHOWN ON PLANS AND/OR SPECIFIED. ANY OMISSION OF DIRECT REFERENCE HEREIN TO ANY ESSENTIAL ITEM SHALL NOT EXCUSE CONTRACTOR FROM COMPLYING WITH ABOVE INTENT. 1.5.2.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Mar 30, 2022.