Attachment 1 - Requirements Document.pdf

Attachment 1 – Requirements Document

PR # 52800PR250012493

UNITED STATES COAST GUARD

REQUIREMENTS DOCUMENT

1.0 PROJECT TITLE: C2PL-25-003 WMSL-418 DOPPLER SPEED LOG

RECAPITALIZATION

WMSL-418 recap is a(n) CG-761 effort to WMSL DSL Recapitalization is to procure all parts necessary to deploy a standardized, commercially available, replacement for the unsupportable Doppler Speed Log currently in use by the National Security Cutters.

2.0 BACKGROUND:

The Doppler Speed Log systems (DSL) is currently an ongoing recapitalization effort to replace Sperry SRD-500 on 8 WMSL Coast Guard cutters. The DSL Technology

Recapitalization Project is part of a strategy to replace currently installed DSL with newer, supportable components/systems on cutters that require a DSL for speed input.

C5ISC awarded a contract to Furuno USA, to acquire the DS-60 tri-axis Doppler Speed

Log system, as a single system replacement for all cutters. Through testing, the DS-60 was found to have a communication issue with NAVSSI. National Security Cutter (NSC)

Program (CG-9321) selected the Jotron Skipper DL2 as a solution and installed it on

CGC Stone and keeping the DeepWater Depth Sounder (DWDS). This solution is successfully communicating with NAVSSI making it an ideal proxy for the DS-60. In

June 2024 C5ISC-C2PL-NAV approved the Skipper DL2 as a solution for the legacy

NSC vessels.

3.0 SCOPE:

The scope of this recapitalization will be to replace the SRD-500/SRD-500A Doppler

Speed Log (DSL) systems on National Security Cutters (Hulls 1-8) with the Skipper DL2

DSL system that meets parameters outlined in the operational, functional and system requirements.

4.0 REQUIREMENTS:

The Skipper DL2 Doppler Speed Log dual axis presents the critical parameters on a touch screen and can be interfaced with bridge systems and repeaters. The DL2 can also present distance traveled, depth and water temperature.

Doppler technology is commonly considered the gold standard of speed measurement as it measures remotely, (away from the effects caused by the vessel itself) and once installed, it operates even with considerable organic growth on the transducer.

The Coast Guard is looking to acquire hardware kits. These kits will be shipped to SFLC in Baltimore, MD. The justification is detailed below:

4.1 Buy 01 of SY-DL2SB-SA to have on standby for the two Cutters that currently have the Skipper DL2 DSL units installed. Any discrepancies or reduction in mission capabilities will be recorded in the Coast Guards Electronic Asset log.

4.2 Buy 02 of SY-DL2SW-SA to have on standby (retrofit kit) in case the old DSL units (SRD-500/500A) on the other 08 Cutters fails as its required by the upcoming

TCTO. If the DSL fails, the TCTO dictates the new units be installed, via emergency dockside availability, as speed through water would cause issues with the fire control system and the primary navigation system on those cutters.

4.3 Buy 02 of SY-DL2SB-SA to install for the first two cutters going to drydock in

FY26. Although these are not specialty items, they are large, require large scale logistics to order and ship, and the current lead time would make it near impossible to procure in enough time and would impact the upcoming WMSL drydock scheduled installs.

This item kit description listed below in Table 1.

Table 1:

Line Item

Number

Quantity Unit MFG Part Number Description

0001 2 EA SY-DL2SW-SA SKIPPER DL2 Speed Log - retro-fit kit

0002 2 EA CU-M001-SB Multi - PanelPC 9" touch display

0003 2 EA JB70D2-SA Electronic Unit for DL2 Dual Axis Doppler Speed

0004 2 EA JB12-SA Junction Box, 12 pole for Speed Logs

2 EA DL2SW-SA Log sensor DL2 for SPERRY SRD-421/500 Sea

0006 3 EA SY-DL2SB-SA SKIPPER DL2 Speed Log – complete kit

0007 3 EA SB-100-SB Sea Valve 100 mm, Single Bottom SST SKIPPER

0008 3 EA SB-100-SB-M-KIT (Needed for all SB-100-

SB Sea Valves)

0009 3 EA CU-M001-SB Multi - PanelPC 9" touch display

0010 3 EA JB12-SA Junction Box, 12 pole for Speed Logs

0011 3 EA JB70D2-SA "Electronic Unit for DL2 Dual Axis Doppler Speed

Log"

0012 3 EA DL2SG-SA Log sensor DL2 SKIPPER for 100mm Sea Valve

0013 5 EA Pallet Pallet frames for shipping

0014 1 EA Shipping For Freight

Table 2 Shipping table:

The following table contains the instructions for how these items shall be shipped to SFLC.

All kits shall be shipped on its own pallet. Each kit number shall be labelled on the outside of each pallet. Each item contained within each kit shall be individually labeled.

1. Pallet One (1): needs to include 01 EA quantity of line item 0001.

Item 1: SY-DL2SW-SA “kit” contains line items 0002 through 0005.

2. Pallet Two (2): needs to include 01 EA quantity of line item 0001.

Item 1: SY-DL2SW-SA “kit” contains line items 0002 through 0005.

3. Pallet Three (3): needs to include 01 EA quantity of line item 0006.

Item 6: SY-DL2SB-SA “kit” contains line items 0007 through 0012.

4. Pallet Four (4): needs to include 01 EA quantity of line item 0006.

Item 6: SY-DL2SB-SA “kit” contains line items 0007 through 0012.

5. Pallet Five (5): needs to include 01 EA quantity of line item 0006.

Item 6: SY-DL2SB-SA “kit” contains line items 0007 through 0012.

5.0 DELIVERABLES AND DELIVERY SCHEDULE:

No later than (NLT) 30 September 2025.

6.0 GOVERNMENT-FURNISHED EQUIPMENT AND INFORMATION:

The Government will not furnish any resources to the Contractor in support of this contract.

7.0 PLACE OF PERFORMANCE

United States Coast Guard Surface Forces Logistics Center

2401 Hawkins Point Rd, Baltimore, MD 21226

8.0 PERIOD OF PERFORMANCE

The period of performance for this requirement is Date of Award (DOA) – 30 September

2025.

9.0 SECTION 508 REQUIREMENTS

Section 508 of the Rehabilitation Act (classified to29 U.S.C. § 794d) requires that when Federal agencies develop, procure, maintain, or use information and communications technology (ICT), it shall be accessible to people with disabilities. Federal employees and members of the public with disabilities must be afforded access to and use of information and data comparable to that of

Federal employees and members of the public without disabilities.

All products, platforms and services delivered as part of this work statement that, by definition, aredeemed ICT shall conform to the revised regulatory implementation of Section 508 Standards, whichare located at 36 C.F.R. § 1194.1 & Appendixes A, C & D, and available at https://www.ecfr.gov/cgi-bin/text-idx?SID=e1c6735e25593339a9db63534259d8ec&mc=true&node=pt36.3.1194&rgn=div5. In the revised regulation, ICT replaced the term electronic and information technology (EIT) used in the original 508 standards. ICT includes IT and other equipment.

Exceptions for this work statement have been determined by DHS and only the exceptions described herein may be applied. Any request for additional exceptions shall be sent to the

Contracting Officer and a determination will be made according to DHS Directive 139-05, Office of Accessible Systems and Technology, dated November 12, 2018 and DHS Instruction 139-05-

001, Managing the Accessible Systems and Technology Program, dated November 20, 2018, or any successor publication.

Section 508 Requirements for Technology Products

Section 508 applicability to Information and Communications Technology (ICT):

SkipperDL2 depth sounder

Applicable Exception: N/A Authorization #: N/A

Applicable Functional Performance Criteria: Does not apply

Applicable 508 requirements for electronic content features and components: Does not apply

Applicable 508 requirements for software features and components: Does not apply

Applicable 508 requirements for hardware features and components (including but not limited to Video Displays and Monitors): All requirements in Chapter 4 apply

Applicable 508 requirements for support services and documentation: All requirements in

Chapter 6 apply

Section 508 Deliverables

1.Section 508 Accessibility Conformance Reports: For each ICT item offered through this contract (including commercially available products, and solutions consisting of ICT that are developed or modified pursuant to this contract), the Offeror shall provide an Accessibility

Conformance Report (ACR) to document conformance claims against the applicable Section

508standards. The ACR shall be based on the Voluntary Product Accessibility Template Version

2.0508 (or successor versions). The template can be found at https://www.itic.org/policy/accessibility/vpat. Each ACR shall be completed by following all of the instructions provided in the template, including an explanation of the validation method used as abasis for the conformance claims in the report.

# End of Requirements Document #