Attachment 1 - Qualifications.pdf

ATTACHMENT 1

MINIMUM PRIMARY KEY PERSONNEL AND CONSULTANT QUALIFICATIONS

1. All key personnel shall have the ability to communicate and effectively demonstrate satisfactory expertise in their individual architectural and engineering disciplines. All key personnel identified by the contract shall meet the minimum qualifications listed below. The performance of key personnel, during the term of the contract, shall be acceptable to the

Contracting Officer. Should an individual performance be found unacceptable to the Contracting

Officer, the contractor shall replace this individual who meets the minimum qualifications listed below.

A. Project Manager- Shall have at experience as a Project Manager, a registered architect or engineer, expertise in advanced contract administration, cost and pricing, specifications, materials and management of architectural, structural, mechanical electrical and civil engineering services, have a working knowledge of US building codes, scheduling and state of the art methods associated with medical facility construction.

B. Architect(s) - Shall be a registered architect, with experience as a design architect, medical facility design experience, a Bachelor’s degree in architecture, a working knowledge of the Uniform Building Code (UBC), Life Safety Code (NPFA 101), Uniform Federal Accessibility Standards (UFAS). The Americans with Disability Act

(ADA), OSHA and ASTM standards.

C. Civil Site /Sanitary Engineer(s) - Shall be a registered professional engineer with civil sanitary design experience, a Bachelor’s degree in civil engineering, experience in site development, utility design, design of roadways, pavement, cost estimating and landscaping, a working knowledge of UFAS, ADA, National Environmental Policy Act regulations (EPA), Federal Water Pollution Control Act, and National Pollutant

Discharge Elimination System (NPDES).

D. Structural Engineer(s) - Shall be a registered structural engineer, shall have experience in structural design of both vertical and horizontal construction, a Bachelor’s degree in civil engineering. Shall have design and analysis expertise in concrete, structural steel, timber-construction, cost estimating, value engineering, masonry, foundations, lateral load. Have a working knowledge of structural and building codes and design manuals including the latest editions of ACI 318, AISC, and USC, Standard Building Code, BOCA, AWS, and CRSI handbook.

E. Cost Estimator(s) - Shall have cost estimating experience, a Bachelor’s degree in architecture or civil engineering, on building construction, Shall be knowledgeable in all phases of both vertical and horizontal construction, value engineering, materials, finishes, major building systems, and medical facility development.

F. Construction Inspector(s) - Shall have experience in construction, renovations, engineering systems such as structural/electrical/mechanical /plumbing/ and utilities.

Shall have a Bachelor’s degree in architecture or engineering or building construction.

G. Specification Writer(s) - Shall have experience in construction, renovations, engineering systems such as structural/electrical/mechanical /plumbing/ and utilities.

Shall have a Bachelor’s degree in architecture or engineering, or building construction.

H. Environmental Engineer(s) - Shall have experience in industrial facilities and hazardous waste. Shall have a Bachelor’s degree in environmental science. Shall have a working knowledge of OSHA, RCRA and CERCLA and the National Emission

Standards for Hazardous Air Pollutants, National Environmental Policy Act regulations

(NEPA), Federal Water Pollution Control Act, and National Pollutant Discharge

Elimination System (NPDES), pollution standards for, soil, waste, lead and asbestos sampling.