Attachment 1 PWS - Automated Tool Control Trailer.docx

Performance Work Statement

305 MXG Smart Trailer

1. The scope of work is as follows in the Performance Work Statement (PWS). The contractor shall furnish a fully operational ATC smart trailer. No alteration, additions or deletions shall be made to the contract unless prior approval is given in writing by the Contracting Officer (CO).

This acquisition is for the procurement ATC smart trailer is to provide a mobile and deployable CTK/workstation for performing inspections. The smart trailer is ideal for bare-base locations, advon, or MRT situations. The smart trailer has self-sustaining power for tools, computer, Wifi, HVAC, internal and external lighting. The trailer is pre-stocked and able to be rapidly deployed loaded on C-5/C-17/C-130 aircraft.

The Contractor is responsible for the trailer workmanship for 2 years. After that a local contract is required for upkeep. Tools and lockers are warrantied under Snap-on.

2. The Contracting Officer Representative (COR) will be MXS Inspection Section CTK Section Chief: TSgt Ryan Bloor, he can be reached at 609-815-0318.

3. Project Description:

The smart trailer is an 18’L x 8.5’W x 7’ interior height enclosed steel frame EZ STAK trailer. Flat roof and front with a 6’ extended tongue. Has 1 36” x 78” right hinged side door and full size rear ramp door. 3/4” marine grade, hex pattern, black plywood flooring with 1/4” white one side ABS coated plywood walls and ceilings with 16” studs O.C. and module polyurethane spray foam at 2lb density(R6). Exterior covered in .030 white aluminum (screw less). Tandem 7000lb torsion axles with electric brakes on both. Electric tongue jack with adjustable pintle coupler 22’-28’ from ground and 7 pin plug. Painted steel chassis with 24” ATP stone guard and 7000ln manual stabilizer jacks on each corner. D.O.T. led lightening and conspicuity tape on all sides.

Interior Cabinets will include. 1 ea. DU-36-24-24-005 aluminum drawer unit 36H x 24W x 24D with 2ea 4”H, 3ea 6”H drawers, 4ea drivers per drawer, 200lbs slides. 1 ea. 1X CL-72-48-24-019 aluminum closet unit 72”H x 48”W x 24”D, custom solid primary/secondary door with locking t-handle, 4 ea. adjustable shelves, 4 ea. dividers per shelf, cut out at back(14”x10”). 1ea CT-37.5-100-25-001 countertop 37.5”h x 100”W x 25D with 1.5” maple side panels. 1 ea. 1455283 laptop tray. 1 ea. GEN-31-45-33-001 aluminum generator cabinet 31”H x 45”W x 33”D hinged at top and front panels, 2 ea. locking T-handles, weather stripping around door, stainless strap hinges, louvres on 3 sides of the cabinet. 2 ea. CH-14-36-14-001 aluminum chest unit 14”H x 36”W x 14”D with solid top-hinged locking T-handles with 2 ea. gas springs. 1 ea. 1386458 48”W 5 hook assembly, 1 ea. CL-72-24-24-013 closet assembly with solid master/slave door with locking T-handles, 4 ea. adjustable shelves with 2 ea. dividers per shelf, cut out for wheel well (14” x 10”). Finishing trim, aluminum construction, and stainless steel hinges included on all cabinets.

Trailer electrical will include 7 ea. exterior led lights, 12v, white scene lights for perimeter enhancement. 4 ea. interior,110v, 48’long ,Vaportight, led lights. 4 ea. exterior, 12v, 600 Series Whelen, warning amber flashers, 1 ea. module rooftop air conditioner. 1 ea. 13,500 BTU non-ducted, Domestic Brisk Air, polar white with built in thermostat. 1 ea. 24 count breaker panel, 120/240V, 100A, CQ0124M100PC. 1 ea. 12V module battery and 20 amp charger, group 27 deep cycle batt with box and Xantrex charger. 4 ea. module electrical outlets, 15A, 125V, non-GFI, 2 plug. 2 ea. module decora electrical switch, 15A, 120V, 3P(3 way). 3 ea. module electrical outlets, 15A, 125V, 2 plug with 2 USB ports. 1 ea. GPS9700A New gasoline generator, 9.7 KW, 120/240V. 1 ea. module Shore Power mobile electrical generator, 30A, 125V. 1 ea. 25 feet electrical Shore Power cord, 30 amp 125V/250V, 10/4 SOOW. 1 ea. electrical fan-forced in-wall heater, 3000W, 240V, 10240 BTU, with grill and thermostat.

Additional items included are a breakaway kit, 1ea spare tire, document holder, and side out step at side door. Exterior side mounted ladder rack to secure 28’ or 10’ step ladder (pair). 14’ manual awning (light color). 6 ea. tie down rings, 4” x 3.5”, 12,200lbs cap, plastic base.

Tool kit will include:

Shipping is included in quote. Trailer has a 2 year bumper to bumper warranty provided by EZ Stak, and the Snap-On tools are covered under Snap-On’s life time warranty. The smart trailer is designed for the KC-46 but has the basic tools for other aircraft if needed.

4. Delivery: A proximity 3 months after purchase the smart trailer should be delivered to 2201 Grissom Road JB MDL, NJ 0864. Delivery should take place between the hours of 0800-1600, Monday through Friday. POC for deliver are TSgt Bloor at 609-815-0318 or TSgt Panchu at 407-572-3780. Delivery driver will be escorted to the flight line side of building 2201 to drop the trailer off by the CTK entrance.