The file's text, extracted by GovTribe without its formatting.
ATTACHMENT 1 – PRODUCT SPECIFICATIONS
Request for Proposal # 260000002026 Trailer Mounted Sewer Jetters All items specified and furnished by the Contractor must be new, must be of the latest model in current production, and must include all standard features normally offered with these models.
Referenced make/model of the sewer jetter trailer is 747-FR2000 Classic Trailer Jet. Bidder may offer alternate make/model or exceptions to the specifications. If offering an alternate, product literature for the make/model offered must be provided with bid response.
Bidder’s Response: Indicate offered sewer jetter trailer:
Make:
Model:
RFP 260000002026, Attachment 1 2 Below are the requirements, specifications, and options the offered Units must meet or exceed. Bidder must respond to each listed with YES or NO (or enter additional information as requested) to indicate the offered Unit meets the requirement. If NO is indicated, provide explanation and available option.
Bidder’s Response
| 1.0 |
| Engine & Pump Options |
| 1.1 |
| 56 HP Turbo Diesel Tier IV Engine |
| 1.2 |
| Plunger pump must run at 40 GPM @ 2000 PSI with 30 min run dry capability |
| 1.3 |
| Lighted Nema 4 control Panel |
| 1.4 |
| Tachometer/hour meter to monitor and control speed of the jetter’s internal components |
| 1.5 |
| Auto shutdown for high engine temperature/low oil pressure |
| 1.6 |
| Air purge valve to ensure operational efficiency and safety |
| 1.7 |
| Recirculation system to return water to the jetter’s water supply |
| 1.8 |
| Painted steel shroud enclosure with locking access doors |
| 1.9 |
| Engine display to monitor status of unit’s engine |
| 1.10 |
| Electronic throttle control to process data and regulate the throttle |
| 1.11 |
| Drain valves for water pump to ensure usability in cold climates, |
| 1.12 |
| Toggle switch for the electronic/hydraulic clutch engage (mechanical engage is not acceptable) |
| 2.0 |
| Hose Reel & Hose Options |
| 2.1 |
| Rotating safety reel with minimum 800’ of capacity of a ¾” hose |
| 2.2 |
| Automatic levelwind with hydraulic up/down action |
| 2.3 |
| Digital reference distance meter within 10% accuracy |
| 2.4 |
| Minimum 600’ of ¾” ID x 2,500 PSI operating pressure |
| 2.5 |
| Washdown system with 50’ of retractable hose reel |
| 3.1 |
| 700 gallon black super-poly water tank with 2.5” fill system |
| 3.2 |
| Storage rack for fill hose |
| 4.1 |
| Storage bin to store items such as hose guide, washdown gun, and upstream pulley guide; storage bin must be mounted inside of lockable shroud. |
| 4.2 |
| Top opening aluminum toolbox on roadside of jetter installed to MDOT’s specifications |
| 4.3 |
| Six 28” D.O.T. safety cones and holder |
| 5.0 |
| Electrical & Lighting |
| 5.1 |
| LED lighting installed in the tool storage compartment |
| 5.2 |
| LED flood light installed on the exterior of the unit. Location to be determined by MDOT. |
| 5.3 |
| LED arrow stick with two (2) green/amber rotators installed on the exterior of the unit. Location to be determined by MDOT. |
| 5.4 |
| Wireless remote pendant control with hose reel payout/retrieve, throttle up/down, water on/off, and kill switch |
| 5.5 |
| Remote pressure display with wireless pendant. |
| 6.1 |
| Tandem axle trailer with GVWR of at least 14,000 lbs |
| 6.3 |
| One fender mounted, aluminum toolbox |
| 6.4 |
| Pintle hitch (ball hitch is not acceptable) |
| 6.5 |
| D.O.T. approved LED lighting, using MDOT amber/green flash pattern when applicable |
| 6.6 |
| Spare tire and rim on tire mounting bracket |
| 7.3 |
| Chisel point penetrating nozzle |
| 7.4 |
| Dual degree flushing nozzle |
| 7.5 |
| Finned nozzle extension |
| 7.7 |
| Washdown gun w/25’ extension hose |
| 7.8 |
| Upstream pulley guide |
| 7.10 |
| 2 sets per unit of Operations, Maintenance, and Safety Manuals |
End of Specification