Attachment 1 Performance Work Statement.pdf
PDF 131 KB Posted
- Attached to
- Fall Protection Equipment Load Testing
- Solicitation number
- TH1989
About this file
This document is a Performance Work Statement (PWS) for a federal contract opportunity related to fall protection equipment load testing for the 302nd Maintenance Group at Peterson Space Force Base in Colorado Springs, Colorado.
The PWS requires the contractor to provide all non-personal services, including labor and testing materials, to perform load testing on the trolley beams in the hangars to validate the fall protection system meets OSHA regulations and ANSI standards. The contractor shall complete the load testing on the trolley beams in Buildings 210 and 214, and provide a final testing report sealed by a Colorado Professional Engineer. The 302nd Maintenance Group will coordinate the testing schedule with the contractor to minimize impact on ongoing mission requirements. The contractor is not permitted to remove any portions of the fall arrest system from the hangars without prior approval. The related federal contract opportunity is a pre-solicitation with Solicitation Number TH1989 for Fall Protection Equipment Load Testing, to be issued by the Department of the Air Force Space Command.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought - Fall Protection.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PWS – 302nd Fall Protection Load Testing
PERFORMANCE WORK STATEMENT
302nd Maintenance Group
Fall Protection System Load Testing 23 April 2024
1. SCOPE. The Contractor shall provide all non-personal services to include the coordination and supply of labor and testing materials associated with trolley load testing as previously identified/described to perform fall protection load testing (i.e.
trolley load testing) for the 302nd Maintenance Group at Peterson Space Force Base (SFB), Colorado Springs, Colorado.
2. SPECIFIC TASKS. The Contractor shall perform fall protection equipment load testing for the trolley beams in the hangars as outlined in the following paragraphs:
2.1. The Contractor shall complete the load testing of each trolley beam using the following applicable instructions/regulations: Occupational Safety and Health Administration (OSHA); American National Standards Institute (ANSI) Standard Z359; and manufacturer requirements. Load testing will validate the fall protection system meets required OSHA regulations and ANSI standards. If system does not meet the minimum regulations/standards, the Contractor can provide recommendations to make the system in compliance.
2.2. The Contractor shall load test the trolley beams in each of the hangars.
The fall arrest systems are located at the following:
• Building 210 Bay 1
• Building 210 Bay 2
• Building 214 Bay 3
2.3. At the completion of the load testing, the Contractor will provide a testing report summarizing the findings of load testing, sealed by a Colorado Professional Engineer.
3. WORK CONTROL. The 302nd Maintenance Group Point of Contacts (POCs) shall schedule the inspection of the fall protection equipment load testing with the Contractor to ensure minimum impact to ongoing 302nd Maintenance Group mission requirements, and/or to de-conflict with weekends/holidays.
4. GENERAL INFORMATION
4.1. Place of Performance. Work shall be performed in the hangar/shop where each fall arrest system is located at Peterson SFB, Colorado Springs, CO.
4.2. The Contractor shall not remove any portion of the fall arrest system from the hangar to conduct any portion of the load testing. Should the Contractor identify a need to remove a portion of the fall arrest system, the Contractor must notify the respective 302nd Maintenance Group POC for approval and coordination.
4.3. Contractor employees shall identify themselves as Contractor personnel by introducing themselves, or being introduced as Contractor personnel, and displaying distinguishing badges or other visible identification for meetings with Government personnel. In addition, Contractor personnel shall appropriately identify themselves as Contractor employees in telephone conversations and in formal and informal written correspondence. The 302nd Maintenance POC will escort the Contractor to all flightline hangar test areas but will not be required to physically stand by for job
PWS – 302nd Fall Protection Load Testing completion.
ACRONYMS:
ANSI – American National Standards Institute OSHA – Occupational Safety and Health Administration POC – Point of Contact
File details come from the government source that posted it. Updated .