Attachment 1-OnsiteLocationInfo.pdf
PDF 225 KB Posted
- Solicitation number
- W912DW25R13H0
About this file
This is a location information document providing detailed access instructions for an onsite Industry Day at Albeni Falls Dam in Oldtown, Idaho on January 30, 2025, from 10:00 AM to 2:00 PM PST. The document contains a satellite map image showing the layout of the dam facility with four marked locations: the Visitor Center (1), Security Gate 1 (2), Security Gate 2 (3), and the transition point towards the Spillway Bridge (4).
The document outlines specific entry procedures, requiring attendees to check in at Gate 1 using a pedestal call box, where names will be verified against a pre-registered list. Attendees must park between markers 2 and 3, present photo identification at Gate 2, and attend a safety briefing in the conference room before accessing the project site. Safety gear inspection is required before entering additional areas. The facility is located at 2376 E Hwy 2, Oldtown, ID 83822.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Albeni Falls Dam Spillway Gate Replacement Onsite Industry Day
JANUARY 30, 2025
10:00AM-2:00PM PST
Address: Albeni Falls Dam, 2376 E Hwy 2, Oldtown, ID 83822
Albeni Falls Dam Visitor Center
Albeni Falls Dam Security Gate 1
Albeni Falls Dam Security Gate 2
Transition point towards Spillway Bridge
In-processing begins for all Vendors at the main entrance. When you approach Gate 1 (Marker 2), you will be required to state that you are attending the “AFD Spillway Gate Replacement Industry Day”. At Marker 2, you will use the pedestal call box to contact the Administrative Assistant at the extension listed on the plaque. Your name will be checked against the pre-registered
Albeni Falls Dam Spillway Gate Replacement Onsite Industry Day
JANUARY 30, 2025
10:00AM-2:00PM PST
attendees’ list and you will then be directed to drive to the main parking lot, between markers 2 and 3, where you will park your vehicle for the entirety of the site visit. At Gate 2 (Marker 3), you will be required to present photo identification and AFD staff will direct you to the conference room for the safety briefing and project overview prior to proceeding out to the project site.
Your safety gear will be inspected before entry into any additional areas.
File details come from the government source that posted it. Updated .