Attachment 1 - NB6720602402751 Specifications.pdf

Requirements / Specification Document

TITLE: Low‐Cost Arbitrary Waveform Generator

Requesting Laboratory / Division / Group:

Communications Technology Laboratory Radio Frequency Technology Division Superconductive Electronics Group (672.06)

General Statement of Need:

The National Institute of Standards and Technology (NIST), along with the Superconductive Electronics Group (672.06) is developing a prototype quantum bit (“qubit”) as a potential standard test instrument. The testing of this standard qubit requires shaped microwave signals generated by an Arbitrary Waveform Generator (AWG) that can generate signals in signals in the 400 MHz frequency range signals has at least 12 bits of resolution and it has the capacity of digitizing the down converted readout signals for active feedback control..

We wish to purchase a new arbitrary waveform generator to facilitate the development and testing of our qubit reference system.

Item Specifications and Quantities:

Item 1: Arbitrary Microwave Generator

Quantity: 1

Specifications:

1 6 Standalone independent output channels (read from different memory sections) with 400 MHz bandwidth

2 Ability to generate samples at a not‐return‐to‐zero rate up to or greater than 1 GSamples/sec

3 Analog bandwidth of 400 MHz per channel.

4 Ability to choose between at least 65536 voltage levels (16‐bit) for each sample

5 Peak‐to‐peak maximum voltage of at least 500 mV into 50Ω for each output

6 Ability to take and deliver a clock and fast trigger signal.

7 10 Digital Output Channels

8 Minimum of 2 Standalone input channels with minimum 1Gsample/s acquisition

8.1 Input channels bandwidth of at least 400 MHz

8.2 Minimum of 12‐bit resolution

9 Real‐Time Capabilities for active feedback control of the output channels with a maximum feedback latency of 400 ns for both digital and analog.

10 Self‐contained and powered using standard 120Vac / 60 Hz wall power.

11 Rack Mountable

12 Established commercial product with multiple units operating successfully in the field. Experimental, prototype, or custom items are not acceptable.

13 Be a new item (not refurbished or reconditioned) covered by the original manufacturer’s full warranty with service provided by that manufacturer’s U.S.‐based service organization. The use of “gray market” components not authorized for sale in the U.S. by the proposer is not acceptable.

Procurement Support Information and Ancillary Services:

Section Requirements/Specifications

Planning Considerations

☒ N/A

☐ List any visits required to allow potential vendors to see site specific constraints.

[Explain Requirements.]

☐ US citizen required on‐site (foreign nationals require pre‐ registration 30 days prior to visit.)

☐ Vendor Representative On‐Site more than three (3) days.

☐ Other Considerations:

[List other considerations to ensure an accurate quote.]

Shipping & Delivery

☐ N/A

Shipping Address:

☒ NIST‐Boulder ATTN: Nathan Flowers‐Jacobs Mail Stop: 672.06 325 Broadway Boulder, CO 80305

☐ NIST‐Gaithersburg

ATTN:

Mail Stop:

100 Bureau Dr Gaithersburg MD 20899

☐ [Alternate Shipping Address]

Shipping Criteria:

☐ Partial Delivery Acceptable

☐ [Enter Shipping and Delivery information by item.]

☐ Direct Delivery to OU Building Required

[Explain Need for Requirement] Building /Room Number: [Enter Building/Room Number]

☐ Building has Loading Dock

Containerization Preference: [Enter Container Type]

Other Requirements:

[List Any Other Requirement] Delivery Date Criteria:

☐ Delivery Shall Be Competed No Later Than:

Click or tap to enter a date.

☐ Delivery Shall Be Made No Earlier Than:

Click or tap to enter a date.

☐ Scheduled Deliveries:

Item Number Due Date

☐ Other:

[List Other Shipping, Delivery or Special Requirements.]

Electronic Media

☒ N/A [Enter Electronic Media Requirements by Item.]

☐ Software

☐ Electronic Manuals

☐ License Key

☐ Other:

[List Any Other Electronic Media Requirements]

☐ US Government Email Address for Software Delivery:

[Enter Address]

Installation

[Enter Installation Requirements by Item]

☐ Vendor Technician on Site

☐ Rigging

☐ Uncrating / Unpackaging

☐ Removal of Packaging Material

☐ Equipment Set Up

☐ Start‐Up Services

☐ Turnkey Installation

☐ Other:

[Enter Details]

NOTE: SME shall be the coordination POC.

Facility / Utility Considerations

☒ N/A

[List Site Specific Utility Considerations by Item]

☐ OFPM Work Order Numbers

[List Work Order Numbers]

☐ Power Available

Voltage: [Enter voltage] (V)

Maximum Current: [Enter max current draw] (A)

Phase: [Choose Phase]

Frequency: [Typically 60Hz] (Hz)

NEMA Plug Type: [Enter Plug Type] (i.e.: NEMA L5‐20P)

Environment: [Choose Environment]

Other Power Considerations:

[List Any Other Power Considerations.]

☐ Utility Connections:

[List Relevant Available Utilities, Pressure(s) and Flowrate(s).]

☐ Other Considerations:

[List Other Considerations to Ensure an Accurate Quote.]

Inspection and Acceptance

☐ N/A

[Inspection Requirements Per Item (Who, When, What, Where)]

☐ On‐Site

☒ Acceptance Not Expected to Exceed 7 Business Days

☐ Acceptance Expected to Exceed 7 Business Days:

[Duration]

☐ Inspection and Acceptance Plan:

[Explanation]

[Enter Other Requirements]

Training

Training Requirements (Who, When, What, Where)

☐ Number of Trainees: [Enter Number of Trainees]

☐ On‐Site

☐ Off‐Site Location: [Enter Location(s)]

Is Trainee Travel Required: [Choose Answer]

Scope of Training ☐ Operation ☐ Maintenance ☐ Troubleshooting

☐ Safety ☐ Other

[Enter Other Scope of Training Requirements] ☐ Training Materials to be Provided by Government:

[Describe Materials]

☐ Training Materials to be Provided by Vendor:

[Describe Materials]

☐ Other

[Enter Other Training Requirements]

NOTE: SME shall be coordination POC.

Warranty

☐ N/A

Base Manufacturer Warranty is acceptable Warranty Length: Base Manufacturer Warranty is acceptable

What is included?

☐ Labor ☐ Parts ☐ Travel

☐ Cost and Liability for Returns

☐ Other

☐ 1 Option Period

☐ 2 Option Periods

☐ 3 Option Periods

☐ 4 Option Periods (Maximum)

Calibration

[Describe Calibration Requirements Per Item] Calibration Plan Length: [i.e. 3 ‐ Years] What is Included?

☐ Labor ☐ Spare Parts ☐ Consumables

☐ Travel ☐ Cost and Liability for Shipment

☐ Software Updates ☐ Manuals

☐ Other

[Enter Other Requirements] ☐ Requirements:

[Enter Requirements] (i.e.: On‐Site Within 72 hours, etc.)

☐ 1 Option Period Length: [i.e. 1 – Year / 6 ‐ Months]

☐ 2 Option Periods

Maintenance

[Describe Maintenance Requirements Per Item] Maintenance Plan Length: [i.e. 3 ‐ Years] What is Included?

☐ Labor ☐ Spare Parts ☐ Consumables

☐ Travel ☐ Cost and Liability for Shipment

☐ Software Updates ☐ Manuals

☐ Other

[Enter Other Requirements] ☐ Requirements:

[Enter Requirements] (i.e.: On‐Site Within 72 hours, etc.)

☐ 1 Option Period Length: [i.e. 1 – Year / 6 ‐ Months]

☐ 2 Option Periods

Government List Any Government Furnished Material / Equipment Per Item]

Furnished Material / Equipment

☒ N/A

☐ Samples for Testing

☐ Equipment which will leave Government Site

Description:

Serial Number:

NIST Property Number:

[Enter Description] [Enter Serial Number] [Enter NIST Property Number]

☐ Other: [Enter Other Details]

Travel

[Describe any Travel Requirements Per Item]

☐ Explain:

[Enter Justification / Requirement]

[Enter Other Requirements]

NOTE TO VENDOR: To the maximum extent possible, include travel requirement estimates as part of pertinent sections above (Installation, Maintenance, Repair, etc.). Otherwise, Travel will be a separate line item, reimbursable per the Federal Travel Regulation.