Attachment_1_Minimum_Specifications_140A1623Q0067.docx

Attachment 1 Minimum Specifications

Ballistic Helmet

· Level IIIA protection according to National Institute of Justice (NIJ) 0106.01

· High Cut

· Fragmentation protection according to MilStd 662f

· Made from Kevlar fibers and thermoset resin shell construction

· D3O Trust 7 Helmet padding system

· ACH-ARC Rail System

· Low profile 3 Hole NVG Shroud

· Loop panels for id placards

· Bungee System for support of NVG

· Ratchet Dial Suspension System

· Shell Size: Small (21.1-21.9,3.1LBS) Medium (21.9-22.7,3.15LBS)

· Shell Size: Large (22.7-24,3.2LBS) XLARGE (24-26,3.3LBS) Plate Carrier

· Constructed of durable 500 denier Cordura nylon

· Laser cut Molle plateform on front, rear and cummerbund reduces weight and adds durability

· Two quick release cummerbund buckles to quickly don and doff plate carrier

· Rear drag handle extends up to 34 inches

· Plate pockets load from the bottom and will accept up to 10 x 12 shooter or SAPI cut plates

· Two shoulder buckles allow quick adjustments to raise or lower plate carrier

· 3D Spacer mesh padding on front, rear and shoulder pads for ventilation and comfort

· Front zipper admin pouch for small field gear such as notepads, pens and multitools

· Rear hydration pocket holds 2L hydration bladder

· Cummerbund features 6 integrated M4 Mag pockets

· Cummerbund features 2 pockets to insert soft armor panels

· Cummerbund features interior laser cut Molle

· panels to attach side armor plate pockets

· Molle loop panels on front and rear to display ID placards

· Available in Black, Coyote, Ranger Green and Multicam

· Lifetime warranty

· Cummerbund Sizing

· Small/Medium - 32 inches to 39 inches

· Large/XLarge - 39 inches to 46 inches

Hard Armor Plate - The Government requires a front and back plate for each carrier.

· NIJ threat Level IV

· NIJ 0101.06 Certified

· Listed on NIJ CPL List

· SAPI/ESAPI Cut

· Weight 8.2lbs

· Stand alone protection

· Single curve

· Single plate

· 10” W x 12” L X 1” D

· Multihit Rated

· Constructed of monolithic ceramic face and polyethylene backing

· 600 Denier water resistant cover

· 10 year ballistic warranty

· Each front and back plate shall have a serial number or an identifiable marker

* The Government requires the items to be kitted (i.e. plates shall be inserted into the carriers) prior to delivery.