Attachment 1 - LTC PID Packaging Consolidated Text.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 5998-016910141

REFERENCE NUMBER:ZD073

BACKPLANE ASSEMBLY:

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

PULSETECH PRODUCTS CORPORATION 00NQ8 P/N 746X805

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:B

UNIT CONT:B9 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:100

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:ZDESD OBJECT TEXT ID ST

REFERENCE NUMBER:ZD028 OBJECT TEXT ID ST

ATTENTION:

THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC

DISCHARGE (ESD) SENSITIVE DEVICE:

>>PRECAUTIONARY PACKAGING, HANDLING, AND

PROCESSING PROCEDURES SHALL BE USED TO PREVENT

DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND

OTHER ENVIRONMENTAL FIELD FORCES.<<

THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING

FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE

AND PACKAGE ESD SENSITIVE DEVICES:

1. SHALL HAVE AN ESD CONTROL PROGRAM (MIL-HDBK-263).

2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773).

ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED,

AND OPENED AT AN APPROVED ESD WORKSTATION -OR-

FIELD SERVICE KIT. FOR FURTHER INFORMATION,

CONSULT MIL-HDBK-773.

3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED

SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX".

REQUIRED BARRIER BAG IS MIL-PRF-81705. (MIL-STD-2073-1E,

PARAGRAPH 5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX)

4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING,

HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO

ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD

(MIL-HDBK-773).

NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL

REQUIREMENTS PERMITTED.

For more information on ESD visit:

https://www.dla.mil/HQ/LogisticsOperations/Packaging

REFERENCE NUMBER:IP056 OBJECT TEXT ID ST

REFERENCE NUMBER:IP027 OBJECT TEXT ID ST

NSN: 6130-015003401

CHARGER,BATTERY

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:CA071

REFERENCE NUMBER:ZD025

PULSETECH PRODUCTS CORPORATION 00NQ8 P/N 746X800

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

NSN: 6130-015327711

CHARGER,BATTERY

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:CA071

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:RD003

PULSETECH PRODUCTS CORPORATION 00NQ8 P/N 746X820

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ITEM DESCRIPTION TEXT:

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER CA071

COMMERCIAL OFF THE SHELF ITEM. ADEQUATE CATALOG

DATA IS AVAILABLE AT THE PROCUREMENT AGENCY TO

EVALUATE ALTERNATE OFFERS.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER RD003

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

REFERENCE NUMBER ZD073

THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM

REFERENCE NUMBER CA060

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

REFERENCE NUMBER ZDESD

ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.

This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.

For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.

For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.

The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.

For additional ESD/EMI packaging information, refer to the following DLA packaging website:

https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/

If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.

REFERENCE NUMBER ZD028

ZZ - ADDITIONAL SPECIAL MARKING: 39 - ESD sensitive electronic device requirements of MIL-STD-129 apply

REFERENCE NUMBER IP056

IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,

PACKAGING, PACKING AND MARKING.

REFERENCE NUMBER IP027

IP027: PACKING AND MARKING REQUIREMENTS FOR FEDERAL STOCK CLASS 5961

SEMICONDUCTORS AND HARDWARE DEVICES AND FSC 5962 ELECTRONIC

MICROCIRCUITS