- ATTACHMENT 1 FOR SOLICITATION HC101321QA537.pdf

*** ATTACHMENT 1 FOR SOLICITATION HC101321QA537 ***

ATTENTION HERNDON, VA LOCATION: THIS REQUIREMENT MUST BE

ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END TO

GOVERNMENT'S SERVICE DELIVERY POINTS (SDP'S) FROM SF03AUG219965,

MEANING THAT PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN

HOLES, CONDUIT, (CENTRAL OFFICE LOCATIONS), AND FIBER BUILDS.

ADDITIONALLY AS A MINIMUM THERE MUST BE A 50 METER PHYSICAL

SEPARATION FROM SF03AUG219965. ***THE 50 METER SEPARATION IS WAIVED

INSIDE BLDG 13555 FOR HERNDON, VA LOCATION.*** 7. THE TELECOM PROVIDER

MUST PROVIDE DITCO COLOR POWERPOINT DRAWINGS FOR TECHNICAL REVIEW

SHOWING THE ROUTES FROM THE COMMERCIAL M. REMARKS CONTINUED:

DEMARCS TO THE SUPPORTING CENTRAL OFFICES AND/OR WIRING CENTERS.

DRAWINGS MUST INCLUDE SEPARATION DISTANCES BETWEEN DIVERSE

REQUIREMENTS, TOTAL FIBER MILES AND ROUND TRIP DELAY (RTD), AND FIBER

ROUTES RED LINED END TO END SO THE GOVERNMENT CAN CONFIRM PHYSICAL

END TO END DIVERSITY REQUIREMENTS ARE MET. ADDITIONALLY, THE VENDOR

IS TO PROVIDE DITCO WITH DETAILED CIRCUIT/PATH CONNECT IVITY

DIAGRAMS, IN KMZ OR KML FORMAT, IDENTIFYING ALL POINTS OF PRESENCE

(POP) FOR EVALUATION AND AS A FINAL RECORD OF THE INSTA LLED PATH.

THESE DIAGRAMS MUST BE PROVIDED TO DISA HQ IE16 (DISA

.MEADE.IE.MBX.IE16-PROVISIONING-TEAM@MAIL.MIL) FOR HISTORICAL

PURPOSES. 8. THE VENDOR MUST PROVIDE LIGHT LEVEL READINGS (SIGNAL

STRENGTH IN DBM) ON THE EXTENSION FROM COMMERCIAL POP TO THE

GOVERNMENT SERVICE DELIVERY POINT (SDP) AT THE "A" AND "Z" LOCATION

PRIOR TO CIRCUIT TURN OVER TO THE GOVERNMENT ENSURING LEVELS ARE

WITHIN SPECS. LIGHT LEVELS MUST BE ADJUSTED TO -3 TO -9 DBM. 9. THE

VENDOR MUST TERMINATE 10GB ETHERNET SERVICE AT SERVICE DELIVERY

LOCATIONS, IAW UNIQUE INSTALLATION FACTORS. 10. THE VENDOR MUST

CONDUCT WALK-THROUGH SITE SURVEY PRIOR TO INSTALLATION AT BOTH

LOCATIONS. 11. THE VENDOR MUST CONTACT DISA GOC IP BACKBONE

ENGINEERING AND IMPLEMENTATION GROUP UPON RECEIPT OF A VALID TSO TO

ESTABLISH THE COORDINATION AND ACTIVATION PROCESS. PHONE: (C) 618-418-

8627, (D) 418-8627. 12. THE VENDOR MUST CONTACT DISA GOC TIER-II

ENGINEERING 48 HOURS PRIOR TO BEGINNING THEIR END-TO-END TESTING.

PHONE: (C) 618-418-8627, (D) 418-8627. 13. THE PROVIDER MUST CONDUCT A

SATISFACTORY 24-HOUR TEST FROM THE DROP SIDE OF THEIR OR LOCAL

EXCHANGE CARRIERS FDP INSTALLED IN THEIR EQUIPMENT SUITE AT THE "A"

LOCATION TO THEIR OR LOCAL EXCHANGE CARRIERS FDP INSTALLED IN THEIR

EQUIPMENT SUITE AT THE "Z" LOCATION AND MUST INCLUDE THE EXTENSION

BETWEEN THE COMMERCIAL DEMARC AND THE GOVERNMENT'S SDP. VENDOR

MUST ENSURE TEST SETS ARE N. REMARKS CONTINUED: PLACED AT THE DROP

SIDE AT THE "A" LOCATION AND AT THE "Z" LOCATION. TESTING MUST BE

SATISFACTORY PRIOR TO TURN OVER TO THE GOVERNMENT FOR ACCEPTANCE

TESTING. THE VENDOR MUST TEST THE CIRCUIT FOR 24 HOURS IAW THE FULL

ITU-T.Y.1564 BENCH MARKING METHODOLOGY FOR NETWORK INTERCONNECT

DEVICES STANDARD, AND AT THE COMMITTED INFORMATION RATE (CIR) IAW

ITU-T-Y.1564.

CIRCUIT REQUIRES THE FOLLOWING PARAMETERS: (A) FIBER TERMINATION:

FRAME FORMAT: 10GB ETHERNET (OPTICAL HANDOFF-10GB ETHERNET-LAN-

PHY-SINGLE MODE FIBER), 1310NM. "SC" OR "LC" CONNECTORS AS DETERMINED

BY SITE SURVEY. NOTE: WHEN EXTENDED REACH OPTICS ARE USED THAT

CHANGE THE TX/RX WAVELENGTH OF THE OPTIC, THE VENDOR WILL NOTIFY

THE GOVERNMENT 30 DAYS PRIOR TO DELIVERY. (B) COMMITTED INFORMATION

RATE (CIR): 10GB. (C) ETHERNET FRAME SIZE WILL BE CONFIGURED TO SUPPORT

MAXIMUM TRANSMISSION UNIT (MTU) OF 9000 OCTETS (BYTES) JUMBO FRAMES.

(D) NO NETWORK INTERFACE UNIT, DEDICATED PATH. (E) GFE CLOCKING:

VENDOR ESFU (OR EQUIVALENT) NOT TO BE ENGINEERED INTO CIRCUIT. (F)

TESTING CRITERIA: VENDOR MUST TEST THE CIRCUIT FOR 24 HOURS IAW THE

FULL ITU-T.Y.1564 BENCH MARKING METHODOLOGY FOR NETWORK

INTERCONNECT DEVICES STANDARD, AND AT THE COMMITTED INFORMATION

RATE (CIR) IAW ITU-T-Y.1564. NOTE: ETHERNET FRAME SIZE DESIGNATOR 'H'

(MTU) IS EQUAL TO 9000 BYTES. (G) LINE MUST REMAIN FULLY OPERATIONAL

AND AVAILABLE TO USERS 24 HOURS A DAY, SEVEN DAYS PER WEEK, MONTHLY

PERFORMANCE OF 99.5% AVAILABILITY OR BETTER. (H) 1 HOUR RESPONSE TIME

TO RESPOND TO CUSTOMER UPON RECEIPT OF TROUBLE. (I) VENDOR REQUIRED

TO HAVE CIRCUIT VISIBILITY TO ASSIST IN ANY CIRCUIT OUTAGES. (J) VENDOR

MUST HAVE A 24X7 NETWORK OPERATIONS CENTER. (K) TELECOM PROVIDER

MUST MAINTAIN OPERATIONS, MAINTENANCE AND ADMINISTRATION

MONITORING OF ETHERNET CIRCUIT. O. REMARKS CONTINUED: (L) THE

COMMERCIAL CIRCUIT WILL BE ACCEPTED ON BEHALF OF THE GOVERNMENT

BY THE DISA GOC IP BACKBONE ENGINEERING AND IMPLEMENTATION GROUP,

SCOTT AFB, IL. (C) 618-418-8627, (D) 418-8627. 2. VENDOR WINNING AWARD IS

RESPONSIBLE FOR INSTALLATION AND MAINTENANCE OF THE SERVICE IAW THE

UNIQUE INSTALLATION FACTORS. 3. INSIDE WIRING IS AUTHORIZED IAW THE

UNIQUE INSTALLATION FACTORS. 4. VENDOR MUST COORDINATE SITE VISIT

WITH POC'S 72 HOURS IN ADVANCE PRIOR TO REQUIRING ACCESS TO FACILITIES

AT BOTH USER LOCATIONS. 5. VENDOR MUST CONTACT DISA GOC TIER-II

ENGINEERING 48 HOURS PRIOR TO BEGINNING THEIR END-TO-END TESTING. 6.

ALL EQUIPMENT AND CIRCUIT PROBLEMS WILL BE REPORTED BY PHONE TO THE

DISA GOC IP BACKBONE ENGINEERING AND IMPLEMENTATION GROUP, SCOTT

AFB, IL. PRIMARY: (C) 618-418-9950, (D) 418-9950 TOLL FREE: 855-868-9950. 7. DD

FORM 1368 WILL BE SUBMITTED ON THIS TRUNK IAW DISAC-DITCO 350-135-1 BY

RNSOC, SCOTT AFB, IL. GUIDANCE ON SUBMISSION IS AVAILABLE AT

<HTTP://WWW.DITCO.DISA.MIL/ASP/PUBLICATIONS.ASP>. CLICK ON "DISA-DITCO

CIRCULAR, 350-135-1, DEFENSE COMMERCIAL COMMUNICATIONS ACQUISITION

PROCEDURES."

MINIMUM TECHNICAL SPECIFICATIONS: SPECIFIC FORMAT TO BE USED IS:

LINE RATE: 10.3125 GIGABITS/S, +- 100 PPM LINE CODE: OPTICAL 1. TEST AND

ACCEPTANCE: THIS CIRCUIT SHALL PASS A FULLY DOCUMENTED,

SATISFACTORY, 72 HOUR SOAK TEST BY DISA GOC AT SCOTT AFB, IL. PRIMARY:

(C) 618-418-8627 (D) 418-8627. 2. ERROR PERFORMANCE: ERROR PERFORMANCE

SHALL BE BETTER THAN THE FOLLOWING PARAMETER THRESHOLDS TO BE

ACCEPTABLE: AVAILABILITY SHALL BE GREATER THAN 99.5% OR BETTER.

FRAME LOSS SHALL BE EQUAL TO ZERO WHEN TESTING AT 10 GIGABIT HIGHEST

FRAME RATE, AND SHALL MEET ITU-T-Y.1564 STANDARDS. JITTER SHALL BE

LESS THAN 3 MSEC. DELAY SHALL BE BETTER THAN 10 MSEC. 3. MEAN TIME TO

LOSS OF BIT COUNT INTEGRITY (MTTLBCI) SHALL P. REMARKS CONTINUED: BE

GREATER THAN 24 HOURS. 4. ROUND TRIP DELAY (RTD) FOR THIS DISA

TRANSPORT TRUNK WILL BE MEASURED IN MILLISECONDS FROM THE

CUSTOMER'S SERVICE DELIVERY POINT (SDP) SITE-A TO THE CUSTOMER'S

SERVICE DELIVERY POINT (SDP) SITE-Z. THE RTD SHALL BE LESS THAN OR

EQUAL TO 10 (10MS (<450)/15MS (450-1000)/ 20MS (1000-1500)/29MS (>1500))

MILLISECONDS TO EFFECTIVELY SUPPORT THE GOVERNMENT'S MISSION. THE

GOVERNMENT ACCEPTING AUTHORITY WILL CONFIRM THE RTD DURING THE

TURN-UP AND TEST PHASE AND IF IT DOES NOT ALIGN WITH THE CONTRACTORS

PROPOSAL, DISA IE161 WILL NOTIFY DITCO IMMEDIATELY IN WRITING. Q.

REMARKS CONTINUED: ANY ADDRESSEE ON THE (TSO) WILL NOTIFY ALL

ADDRESSEES IMMEDIATELY BY MESSAGE IDENTIFYING ANY ISSUES, PROBLEMS,

OR SITUATIONS WHICH MAY PREVENT OR DELAY THE IMPLEMENTATION OF

THIS TELECOMMUNICATIONS SERVICE ORDER (TSO). ALL STATIONS WILL

REVIEW THE CONFIGURATION, EQUIPMENT, CONTACT NUMBERS AND

ADDRESSES CONTAINED IN THIS (TSO) AND PROVIDE UPDATES TO ORIGINATOR

OF (TSO) ANY ERRORS SO THAT SUBSEQUENT (TSOS) MAY BE UPDATED. R.

OVERTIME/EXPEDITING CHARGES: YES, $0.00 S. SATELLITE OBJECTION:

DIVERSITY: DISA MANDATED; T. THIS TSO IS IN SUPPORT OF EXERCISE/PROJECT:

MPLS IMPLEMENTATION U. FACILITY SECURITY ACCESS REQUIREMENT: (SP A)

ESCORT REQUIRED; (SP B) ESCORT REQUIRED; V. JUSTIFICATION OF SERVICE

REQUESTED: THIS REQUIREMENT IS A BONA FIDE NEED OF FY21 AND DISA FY19

FUNDING INFORMATION IS AVAILABLE IN DISA'S TELECOMMUNICATIONS

INVENTORY AND BILLING INFORMATION (TIBI) APPLICATION. W.

DIVERSITY/AVOIDANCE INSTRUCTIONS: DIVERSITY IS REQUIRED. THE VENDORS

MUST PROVIDE MAPS AND DRAWINGS PER STANDARD PROVISIONS. DIVERSITY

IS DEFINED AS 50 METER/164 FEET SEPARATION WITH NO COMMON CONDUITS,

MANHOLES, FACILITY ENTRANCES AND POWER. X. DD FORM 1368: DD FORM

1368'S (MODIFIED USE OF LEASED COMMUNICATION FACILITIES), OR EMAIL

EQUIVALENT, WILL BE SUBMITTED, AS REQUIRED, ON THIS CIRCUIT IAW DISAC-

DITCO 350-135-1 BY THE STATION DESIGNATED IN PARAGRAPH 2H AS CCO/CMO.

GUIDANCE ON SUBMISSION IS AVAILABLE AT

HTTP://WWW.DITCO.DISA.MIL/CORPORATELIBRARY/HOME.ASP. CLICK ON "350-

135-1, DEFENSE COMMERCIAL COMMUNICATIONS ACQUISITION PROCEDURES."