Attachment 1_ drawing_W90VN924R0077.pdf

PDF 790 KB Posted Apr 15, 2024

Attached to: Install a Building Transceiver System at B367, Camp Walker, Korea
Solicitation number: W90VN924R0077
Issued by: Department of the Army Materiel Command Army Contracting Command

About this file

Written by GovTribe AI · Apr 15, 2024

This document appears to contain technical drawings and specifications related to a federal contract opportunity to Install a Building Transceiver System at B367, Camp Walker, Korea. The scope of work includes installing new building transceivers with miscellaneous material, installing a fire alarm antenna system, and checking the entire system for performance. The solicitation number is W90VN924R0077, and the contract is being awarded by the Department of the Army Materiel Command Army Contracting Command. The drawings provide a location plan, fire alarm system plan, and installation details for the new transceiver and antenna system. The document contains detailed technical requirements and specifications for the installation, including information about the fire alarm system, wiring, conduit, and certification requirements.

View the file

Other files

File	Type	Posted
W90VN924R0077.pdf	PDF	Apr 15, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

FEWR NO: JT-10005-2J

LOCATION : B367, CAMP WALKER

LOCATION PLAN

B367, CAMP WALKER

JT-10005-2J 1/3

INSTALL A SEPARATE BUILDING

TRANSCEIVER SYSTEM

NTS

Gate #6

Gate #4

THIS PROJECT

B367, CAMP WALKER

NTS

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

PROJECT NO:

AutoCAD SHX Text

DRAWING NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SCALE AT A3:

AutoCAD SHX Text

SITE:

AutoCAD SHX Text

KELLY FIELD 281

AutoCAD SHX Text Golf Course 235

AutoCAD SHX Text Tennis Court 209

AutoCAD SHX Text

DRIVING RANGE 250

AutoCAD SHX Text Golf Course 235

AutoCAD SHX Text

SKATE PARK 263

AutoCAD SHX Text

PENNSYLVANIA AVENUE

AutoCAD SHX Text

WISCONSIN STREET

AutoCAD SHX Text

INDIANA AVENUE

AutoCAD SHX Text

WISCONSIN STREET

AutoCAD SHX Text

UTAH STREET

AutoCAD SHX Text

GEORGIA STREET

AutoCAD SHX Text

TEXAS STREET

AutoCAD SHX Text

RHODE ISLAND STREET

AutoCAD SHX Text

TEXAS STREET

AutoCAD SHX Text

WASHINGTON STREET

AutoCAD SHX Text

CALIFORNIA STREET

AutoCAD SHX Text

GEORGIA STREET

AutoCAD SHX Text

NEBRASKA STREET

AutoCAD SHX Text

CALIFORNIA STREET

AutoCAD SHX Text

RHODE ISLAND STREET

AutoCAD SHX Text

PENNSYLVANIA AVENUE

AutoCAD SHX Text

GEORGIA STREET

AutoCAD SHX Text

TEXAS STREET

AutoCAD SHX Text Substation 214

AutoCAD SHX Text

NEW FIRE ALARM SYSTEM PLAN

2, 2,820 15,062 17,085

36,830

SCALE : 1/180

GENERAL NOTE

1. THE CONTRACTOR SHALL BE RESPONSIBLE IN VERIFYING ALL EXISTING CONDITION AND

DIMENSIONS PRIOR TO COMMENCING ANY CONSTRUCTION.

ANY DISCREPANCIES SHALL BE BROUGHT IMMEDIATELY TO THE ATTENTION OF THE

CONTRACTING OFFICER.

2. THE CONTRACTOR SHALL BE RESPONSIBLE TO CONSTRUCT OR REPAIR ALL DAMAGES TO

EXSITING AREAS CAUSED BY THIS PROJECT AND TO MATCH CONDITION TO ADJACENT

AREAS DIRECTED BY THE CONTRACTING OFFICER.

3. THE CONTRACTOR SHALL PROVIDE, INSTALL, AND MAINTAIN ALL NECESSARY SIGNS,

LIGHTS, FLARES, BARRICADES, MARKERS, CONES AND OTHER PROTECTIVE FACILITES AND

SHALL TAKE ALL NECESSARY PRECUATIONS FOR THE PROTECTION AND SAFETY OF THE

PUBLIC AND/OR MILITARY TRAFFIC AND OPERATIONS.

4. THE CONTRACTOR SHALL COORDINATE ALL PHASE OF WORK WITH THE CONTRACTING

OFFICER AND USER.

5. THE CONTRACTOR SHALL TAKE MEASURES TO PROTECT EXISTING FACILITIES AND ANY

DAMAGES THAT MAY OCCUR DURING THE COURSE OF HIS WORK SHALL BE RESTORED AT

THE EXPENSE OF THE CONTRACTOR.

SCOPE OF WORK

1. INSTALL NEW BUILDING TRANSCEIVERS WITH MISCELLANEOUS MATERIAL.

2. INSTALL FIRE ALARM ANTENNA SYSTEM.

3. CHECK THE ENTIRE SYSTEM FOR PERFORMANCE.

FMCP

EXISTING FIRE ALARM / MASS NOTIFICATION CONTROL PANEL

NEW BUILDING TRANSCEIVER, BT-XM

NEW OMNI DIRECTIONAL FIRE ALARM ANTENNA

NEW LIGHTING ARRESTOR

NEW GROUNDING ROD

NOTE FOR FIRE ALARM SYSTEM

1. THE WIRING PLAN AND DIAGRAM OF FIRE ALARM SYSTEMS SHOWN ON DRAWINGS

ARE CONCEPTUAL FOR IGCE PURPOSE ONLY. THE CONTRACTOR IS RESPONSIBLE FOR

ALL OTHER ADDITIONAL COST CAUSE FROM NOT SHOWN OR/AND INDICATED IN THE

CONCEPTUAL DRAWINGS TO MEET WITH APPLICABLE CODES AND REGULATION TO

COMPLETE SUBJECT PROJECT CONSTRUCTION. THE CONTRACTOR SHALL SUBMIT THE

DETAILED SHOP DRAWINGS AND DESIGN ANALYSIS TO THE TECHNICAL REVIEW

BRANCH AND FIRE PREVENTION OFFICE FOR APPROVAL PRIOR TO CONSTRUCTION. THE

WIRING AND FINAL DEVICE ADDRESS SHALL BE SHOWN IN THE SHOP DRAWING

SUBMITTAL.

2. FIRE ALARM DEVICES INCLUDING INITIATING DEVICES, NOTIFICATIONS DEVICES AND

ALL OTHER EQUIPMENT FOR FIRE ALARM SYSTEM SHOULD BE LOCATED IN

ACCORDANCE WITH NFPA 72.

ALL FIRE ALARM INITIATING DEVICE SUCH AS SMOKE DETECTOR AND MANUAL PULL

STATIONS SHALL BE INSTALLED IN A MANNER THAT PROVIDES VISUALITY AND ACCESS

FOR TESTING AND PERIODIC MAINTENANCE.

3. THE PATHWAY CLASS DESIGNATION OF THE SIGNAL LINE CIRCUIT(SLC), THE

NOTIFICATION APPLIANCE CIRCUIT(NAC) AND SPEAKER CIRCUIT SHALL BE CLASS IN A

SEPARATE CONDUIT AND ANY CIRCUIT IN RIGID METAL CONDUIT AND NUMBER AND

SPECIFY OF WIRE/CABLE IS FOLLOWED AS DESIGNATION OF MANUFACTURE.

4. ALL CONDUIT TO FIRE ALARM CONTROL PANEL SHALL BE RUN INTO THE SIDE OF THE

PANEL WIRING SHALL BE CONCEALED, BUT MAYBE BE EXPOSED WHERE NOT POSSIBLE.

5. THE CONTRACTOR SHALL BE RESPONSIBLE IN VERIFYING ALL EXISTING CONDITION AND

DIMENSIONS PRIOR TO COMMENCING ANY CONSTRUCTION OR RENOVATION.

6. SOME DETAILS SHOWN ON THIS DRAWING MAY NOT MATCH EXACT FIELD

CONDITIONS. SUCH DETAILS SHALL BE PREPARED IN THE FIELD BY THE CONTRACTOR

ACCORDING TO ACTUAL FIELD CONDITIONS AND SUBMITTED TO THE CONTRACTING

OFFICER FOR APPROVAL.

7. ALL DEVICES AND EQUIPMENT MUST BE INSPECTED BY THE FIRE PREVENTION OFFICE

PRIOR TO INSTALLATION TO VERITY COMPLIANCE WITH STANDARDS. CONTRACT FIRE

PREVENTION OFFICE TO COORDINATE INSPECTION OF MATERIAL.

8. MINIMUM NICET LEVEL III CERTIFICATION IS REQUIRED FOR ALL FIRE ALARM SYSTEM

INSTALLATION. NICET CERTIFIED PERSON MUST BE ON SITE INSTALLING OR

SUPERVISING INSTALLATION OF THE SYSTEM AND MUST PROVIDE A LETTER STATING

THAT THE SYSTEM IS INSTALLED LAW NICET STANDARDS AD NFPA STANDARD.

9. ALL CONDUIT, JUNCTION/BACK BOXES, COVERS AND COUPLINGS, WHEN PROVIDED,

MUST BE FACTORY PAINTED RED IN UNFINISHED AREAS.

FMCP

COAX CABLE IN CONDUIT

AWG #6 CABLE

B367, CAMP WALKER

JT-10005-2J 2/3

INSTALL A SEPARATE BUILDING

TRANSCEIVER SYSTEM

1/180

LEGENDS

B367

CAMP WALKER

UNIT : MM

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

PROJECT NO:

AutoCAD SHX Text

DRAWING NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SCALE AT A3:

SITE:

B367, CAMP WALKER

JT-10005-2J 3/3

INSTALL A SEPARATE BUILDING

TRANSCEIVER SYSTEM

NTSFIRE ALARM ANTENNA INSTALLATION DETAIL

NTS

AutoCAD SHX Text

REVISION:

AutoCAD SHX Text

PROJECT NO:

AutoCAD SHX Text

DRAWING NO:

AutoCAD SHX Text

DRAWN:

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

CHECKED:

AutoCAD SHX Text

TITLE:

AutoCAD SHX Text

SCALE AT A3:

SITE:

시트 및 뷰

모형

시트 및 뷰

모형

시트 및 뷰

모형

2-new.pdf

시트 및 뷰

모형

File details come from the government source that posted it. Updated Apr 15, 2024.