Attachment 1.pdf

Hydraulic excavator w/ attachments

The equipment shall meet the followings minimum requirements:

Standard equipment:

Generation 6 Operating weight min/max 17.500 - 19.600 kg Engine output (ISO 9249) min 115 kW Exhaust emissions level Stage V Backhoe bucket capacity 0,17 - 1,05 m³ Tail swing radius max 1.850 mm Average Consumption (per operating hour) max 6,83 l Uppercarriage - Rear view monitoring with camera Equipment Boom - Pipe-fracture safety valve of stick cylinder Cab Interior - Automatic air conditioning system Control - Safety & Operation - Digging brake, automatic

Configuration of the equipment and working attachment:

Basic machine

— Power Pack Stage V

— Liebherr-SCR technology incl. diesel particulate filter

— Rear view monitoring with camera

— Pipe-fracture safety valve of stick cylinder

— Left control console, folding

— LiDAT Hardware

— LiDAT Hard and Software; consider the LiDAT-license customer terms of a license

— Automatic air conditioning system

— Horn, button on left joystick

— Short key button on joystick configurable

— Overload warning system

— Load diagram

— Roof windows laminated safety glass impact-resistant

— Digging brake, automatic

— Bottom windscreen wiper

— Standard packaging

Dimensions

Transport height – top of cab: max. 3160 Clearance to counterweight: max. 1205 Ground clearance: max. 340 Rear swing radius: max. 1850 Wheelbase: max. 2540

Package

— Warranty (36 months or max. 3000 h - whichever comes first)

Undercarriage

— Rear stabilizer blade min 2,750 mm Support options, welded (high stability)

— Twin tires, Liebherr EM 22, 290/90-20 PR 18 without spacer rings

— Piston rod guard for rear blade

— Undercarriage EW max 2,750mm wide

— Speeder min 37 km/h

— Towing capacity: 127 kN

— Display: Road position

— Central lubrication of undercarriage, manual (one grease point)

— Storage compartment two-sided

— Mudguards (rear and front)

— Electric slip ring (12-ways) including angle sensor

Uppercarriage

— Hydraulic oil, Liebherr Hydraulic HVI (-20 to 40 °C)

— Lubricants and operating fluids standard (-20 °C upto 40 °C)

— Fuel pre-heating system

— Air pre-filter with cyclone dust trap

— Declaration of Conformity for particulate filter for indoor applications (according to TRGS 554)

— Side space monitoring with camera —Skyview 360° Camera

— Automatic central lubrication system, uppercarriage and attachment, 4kg (without quick coupler, without connecting link)

— Reflective warning stickers

— Headlights on uppercarriage right, LED 2,000 lumen, 1 piece

— Headlights on uppercarriage rear, LED 2,000 lumen, 2 pieces

— Spotlight on the left side of the upper hull, 2200-lumen LED, 1 unit

— High beam

Operator's platform

— Radio Comfort with hands-free system

— Wheel and joystick steering

— Steering wheel, wide version (steering wheel rims and spokes), height adjustable steering column

— Operator seat Premium (Air-suspended driver's seat with three-way adjustable armrests, headrest, lap belt, seat heating, manual weight adjustment, adjustable seat cushion angle and length, and mechanical lumbar support; lockable horizontal suspension, automatic weight adjustment, adjustable damper stiffness, pneumatic lumbar support, passive seat ventilation with activated carbon and seat heating (2-stage), active electronic weight adjustment (automatic readjustment), pneumatic low-frequency suspension, and active seat ventilation with activated carbon and fan)

— Air-conditioned storage compartment

— 2" seat belt with retractor

— 10-inch main display and haptic user feedback

— 3.5-inch display with an additional user interface for priority functions, customizable by the operator

— Joystick configurations customizable by the operator (except for Euro control)

— Proportional control with a 4-way mini-joystick

— Phone mount with inductive charging

— Sunshades for front, right side, and rear windows

— Heated, electrically adjustable exterior mirrors

— Seat belt reminder

— Electric cool box

— Windscreen, laminated glass, two pieces

— Exterior mirror standard

— Roof wiper

— Headlights on cabin, front, LED 2,000 lumen, 2 pieces (under rain shield)

— Headlights on cabin, front, LED 2,000 lumen, 2 pieces

— Amber beacon, on cab, LED double flash, 1 piece

— Number panel holder with light

— Ride control

— Lifting cylinder protection for hydraulic attachments

— Positioning slewing brake

— SuperFinish

— Support, control lever console left (joystick occupied)

— Proportional controls (left/right): C-D Medium pressure circuit; A-B Stabilizer / C-D High pressure circuit; A-B

— High pressure circuit, permanent drive

— Switch-over high-pressure circuit and tipping cylinder

— Switch-over high-pressure circuit and adjustment cylinder

— Handrest (elevation) for joystick

— Change in travelling direction, rocker switch in left joystick

— Slewing gear brake on control panel

— Filter for hydraulic hammer return flow

— Driver warning system can be disabled

— Hammerglas -Tempered glass with protective film for the top and bottom panes

Equipment

— Two-piece boom min 5.05m

— Stick min 2.45m

— Tool adapter: direct installation

— Power socket on stick, 24V/10A (ISO 1724)

— Medium pressure circuit

— Grapple lines for stick with tipping kinematic

— High pressure circuit with Tool Control

— Leak oil lines for attachment

— Headlights on boom, LED 2,000 lumen, 2 pieces

— Headlights on stick with guard, LED 2,000 lumen, 2 pieces

— Cables for additional control circuit for SWA

— Centralized lubrication extended for connecting link

— MiC 4.0 BUS for cross-manufacturer communication between construction machinery and attachments MiC 4.0 is a unified, cross-manufacturer, and machine-independent digital communication system designed for the construction process.

With this interface, we are taking the first step toward enabling communication between the machine and the attachment, which simplifies the control of tools that are becoming increasingly complex and intelligent.

— electronic load limit control, pressure cut-off, demand-based flow control, swing circuit priority, and torque control

— Advanced working range limitation - improves work in confined spaces by detecting obstacles early on.

Function: The system limits the boom’s range of motion. The operator can define virtual walls, ceilings, or floors that the machine must not cross.

Applications: It is used to safely perform work near obstacles such as power lines, buildings, moving traffic, or bridges.

Advanced functions: The “Advanced” version enables more complex boundaries (e.g., sloped surfaces, multiple boundaries simultaneously) and more precise, automated control that actively prevents the boundary from being crossed, rather than merely issuing a warning.

Safety: It increases the operator’s concentration, as they need to worry less about potential collisions, and effectively protects the machine’s surroundings

— Load lug on stick, 8 t, 1,000 mm distance from bucket pin point

— 2x spare wheels

— Joystick steering

— Hammer glass, bulletproof glass with protective film for the lower and upper glass

General information

- Preparation for road approval Germany

Attachments:

Quick coupler

Quick hitch system Lehnhoff hydraulic DFH HS-10 Carrier unit: Liebherr A 920 / A918C Litronic

Double catching hook Equipment Quick coupler:

RAL 7021 Rädlinger color & logo:

Loading hooks 5 tonnes Hydraulic package compatible with Lehnhoff system (with continuous pressure) incl. hydraulic hoses

Digging bucket with rotary motor SW 10 Recording (15 - 19 To. ) Class 2 x 45° swivelling rotary motor 2000 mm cutting width Min 650 capacity litres RAL 7021 Rädlinger color & logo Without Center sickle Slope cutter

Snowchains 4 ea

RUD – PROFILE GRIPPER

Suitable for tire size 290/90 R 20

Chains with specially developed profiled grip links for above average traction and heavy duty snow clearance (public utility vehicles) and forestry work – recommended for tractors and trucks.

Economical heavy-duty chain Dense, alternating track chain mesh for the highest possible traction Extremely resistant to wear and fracture Specially developed profile grip links for maximum traction Longer than average service life Manganese-chrome-nickel alloy steel

Epiroc multi gripper series MG1000

Technical data:

Carrier equipment class: 12 - 20 tons Service weight: max 1160 kg Clamping force, maximum: min 4. 6 tons Oil flow: 85 - 120 l/min Operating pressure: 350 bar Oil flow, turning: 20 - 25 litres/min Operating pressure, turning: 150 - 170 bar Volume: min 500 litres Muzzle width: min 1950 mm Bowl width: min. 800 mm Headplate mech. MG1000

Bucket Separator Wolf TSC.154.SGM

TSC.154.SGM

Bucket separator Terra-Star Compactline 154 Ready-to-use housing without shafts Cutting width min 1500mm

Capacity min 1.25m³ Working pressure 200-260 bar Oil requirement 150-180 l/min No leak oil connection necessary The patented Wolf shaft coupling enables easy removal/conversion of the machine to new functions Shaft kit bucket separator Terra-Star Compactline 154 with star disks 500HB TA=15mm - grain size 0-20/25mm and 2 counter bars Application: For screening material and backfilling pipe and sewer trenches Wear protection on the wear zones 60-62HRC Additional welding of the wear zones of the 500HB tools Lehnhoff MS10 system adapter 2 pieces hose line length 1800mm 20S on both sides

Loppers Branch and hedge trimmer AWS 22 for excavator mount with 50 mm shaft and connecting pipe 110 x 110 (without adapter).

Technical data Working width: min 2,20 m Cutting thickness Ø: min 110 mm Drive: Hydraulic cylinder with changeover Required hydraulic capacity: 45 ltr. /min 200 bar Weight: max 220 kg Adapter piece for excavator attachment

Kinshofer Grabs Excavator grabs with interchangeable buckets and vertical cylinders for excavators with operating weights from 13 to 18 tons landscaping, sewer construction, forestry, etc., thanks to quick-change buckets: the buckets can be changed in max 4 minutes.

Upper suspension with swing brake Adapter for “System L-Lock” KMS10/KHS10 incl. universal joint, excl. swing brake – up to 19 tons C18VE special module Hydraulic cylinder with check valve Mounting bracket incl. all mounting parts and KM10F275/180 rotary motor Operating pressure: 350 bar Weight: max 400 kg with check valve Color: RAL 7043 traffic gray Hydraulic rotary motor KM10F275/180V-M20 with flange and vertical connections Load capacity: min 10,000 kg Torque: 1,500 Nm Max. bending moment: 14,000 Nm Operating pressure: 320 bar (32 MPa) Hydraulic connections: Inlet: G 1/2" Outlet: G 3/4" Grab bucket width: min/max 600 mm Capacity: min 245 liters Min 5 teeth

WARRANTY:

Service incl. material and labor. (36 months or max. 3000 h - whichever comes first)

The specified equipment must be new, ready for operation and manufactured from the current series production.

The excavator and attachments must be mounted completely and ready for use.

Before submitting the price, the Contractor must ensure that all necessary connections are available on the carrier vehicle for operation. No further costs may be incurred for the extension and conversion.

An extensive 1 day operation and maintenance training for the subject equipment must be provided by the manufacturer/contractor after delivery at the point destination, in consultation with the responsible department.

TECHNICAL DOCOMENTS

- Operating manual, (printed) 2 piece (English und Deutsch)

- Parts list, (printed) 2 piece (englisch und deutsch)

- Maintenance manual, (printed) 2 piece (English and German)

- Repair manual

- CE certification

- TÜV inspection and certification

- Registration certificate part II

- Data confirmation for the described vehicle for the purpose of submission to the registration authority

DELIVERY ADDRESS

USAG Bavaria Hohenfels DPW, O&M/Buildings and Grounds Branch Camp Naihof, Bldg#59 92366 Hohenfels Tel.: 09472-708 - 8250 Tel.: 09472-708 - 8200