ATTACHMENT 1.pdf
PDF 348 KB Posted
- Attached to
- HOSE ASSEMBLIES
- Solicitation number
- SPMYM4-26-Q-3104
About this file
This document is an Attachment 1 detailing contract item requirements for a 4-inch diameter hose assembly for Pearl Harbor Naval Shipyard (PHNSY) in Hawaii. The specification calls for a Texcel Gamma-Flex Tank 300 hose, 25 feet long, with high UV protection and abrasion resistance, designed for use as a temporary freshwater or saltwater header in a marine environment. The hose must have specific technical characteristics, including a black nitrile tube, black corrugated neoprene cover, high tensile tire cord reinforcement, and temperature tolerance from -40°F to +190°F.
The document outlines stringent requirements for hose assembly, including precise end fitting specifications using brass and stainless steel components from PT Coupling Co., mandatory hydrostatic testing at 300 PSIG for 10 minutes, and comprehensive visual inspection criteria. Vendors must provide manufacturer cut sheets, potentially submit a sample hose for destructive testing, and include detailed certifications with each shipment. Packaging requirements specify careful handling to prevent damage during transit, with guidelines for coiling, padding, and stacking the hoses.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| COMBINED SYNOPSIS SPMYM4-26-Q-3104.pdf | ||
| ATTACHMENT 5.pdf | ||
| SPMYM426Q3104 QUOTE FORM.xlsx | XLSX spreadsheet | |
| ATTACHMENT 3.pdf | ||
| ATTACHMENT 4.pdf | ||
| Clauses Full Text Provisions and Clause.docx | DOCX document | |
| ATTACHMENT 2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1 16 April 2025
Filename: TEXCEL 4 in x 50 ft Hose Assembly JML Attachment 1, PHNSY.doc Page 1 of 1
CONTRACT ITEM REQUIREMENTS:
Purchase Specification:
Hose assembly, fully assembled: 4” ID X 25’ Long, Nonmetallic, high UV protection & abrasion resistant tube & cover with interlocking crimp ferrule and camlock adapter, both ends.
Application or Intended Use: Hose assembly will be installed in the high UV exposure weather in a marine environment for use as a temporary freshwater or saltwater header. Use location in Pearl Harbor, Hawaii. When not in use, hose will be coiled and stacked for storage.
Hose Assembly Construction:
1. Hose: Texcel, Gamma-Flex Tank 300, Part Number GTA30C1-4.0. 4” ID x 4.719” OD x 25 ft long, 300 PSI working pressure, 29 in/HG vacuum, 10” bend radius, 2.72 lbs/ft.
a. Tube: Black Nitrile.
b. Hose Cover: Black corrugated neoprene.
c. Reinforcement: High tensile tire cord plies with dual helix wire.
d. Temperature: -40 deg F to +190 deg F
2. End Fittings: Each hose assembly shall have the following components installed at each end:
a. 1st Hose End: PT Coupling Co., Part Name 40EHD, Item # 1200540H. Brass (alloy UNS C92200), 4”, 300 psi, Heavy
Duty Male Cam & Groove Adapter x Hose Shank.
b. 2nd Hose End: PT Coupling Co., Part Name 40CHD, Item # 1200340H, Brass (alloy UNS C92200), 4”, 300 psi, Heavy Duty Female Cam & Groove Coupler x Hose Shank. Modified with Part Name SLS30, Item # 5009030A.
STA-LOK II Cam Assembly, stainless steel cam arms, pins, pull rings, and lock plates.
c. End Fitting Interlocking Ferrules: End fittings shall be coupled to the hose with PT Coupling Co., Part Name 40424C50SS, Item # 54140424. Pro-Grip C50SS Crimp Ferrule, 4”, 4.75” ID, 0.31” wall thickness, stainless steel, 500 psi.
3. Hose End Assembly: Shall be accomplished in accordance with established National Association for Hose Accessories Distribution (NAHAD) certification standards.
Hose Test & Assembly Certification:
4. Each hose assembly shall be hydrostatically strength tested with commercial clean, fresh water as a test medium, at 300 (+10, -0) PSIG for 10 minutes. No leaks, weeps, bulges, or end fitting slippage allowed.
5. Each hose assembly cover shall be visually inspected to verify they do not have hairline cracks, breaks, abrasions, soft spots, bulges, or other defects that would impair or degrade the function or quality of the material.
6. Vendor shall certify that the brass cam arms, pins, pull rings have been replaced with stainless steel cam arms, pins, pull rings, and lock plates.
7. Vendor shall certify that hose assemblies are free of leaks, deformation, layer separation, excessive twisting or kinking; that end fittings are not damaged or faulty, and that the end fittings and ferrules are properly positioned on the hose ends, in accordance with NAHAD standards.
8. Each certified hose assembly shall be assigned a unique serial number by the vendor assembling the hose carcass and end fittings. The serial number shall be permanently stamped or etch marked on the hose ferrule of each hose end.
9. Written certification of satisfactory hydrostatically testing, satisfactory visual inspection, and satisfactory hose end assembly in accordance with NAHAD standards, shall be provided with each shipped hose.
10. Written certifications shall include the signature of the tester, test date, and the unique hose serial numbers. Hydrostatic strength test certifications shall also include the test pressure and duration.
Vendor Quote:
11. Price quotes for market survey request will not be accepted without the hose, fitting, and ferrule manufacturer cut sheets or product description sheets attached, which shall include as a minimum the technical characteristic of the components and the manufacturer’s address, telephone/fax number, and manufacturer point of contact. The market survey price quote must reference the manufacturer’s part numbers for the item quoted.
12. Each quoting vendor, if requested, shall submit a five-foot (or longer) hose assembly at vendor expense, for destructive testing analysis by the government.
Packaging:
13. Hoses shall be packaged and palletized to ensure that they are not damaged during transit.
a. Ensure hoses are not coiled too tightly and in a way to prevent kinks and internal damage.
b. Utilize sufficient padding to prevent the female camlock adapter arms from gouging adjacent hoses.
c. Ensure that the hose assemblies at the bottom of the stack are not damaged from the weight of the hose assemblies stacked on top of them.
File details come from the government source that posted it. Updated .