Attachment 1. 220822 Salient Characteristics.pdf

47 FTW/MX is requesting the procurement of 3 each, Gasoline Powered Hydraulic Power Unit with below listed specifications:

• Must have an independent power supply system to allow for operation with hydraulics on Beechcraft T-1A Jayhawk, T-38 Talon, and T-6A Texan aircraft for remote operation or Maintenance facility without Electric Power

• Must be able to operate with gasoline

• Must be a weather proof heavy duty all welded steel tubing frame

• Unit to be acquired must be light weight and portable to move from one location to another by personnel with use of a truck and/or trailer, so the power unit measurement/weight specification must be within;

o Depth requirements;

Minimum 54in; maximum 60in o Width requirements;

Minimum 35in; maximum 40in o Height requirements:

Minimum 35in; maximum 42in o Weight requirements:

Minimum 275 lbs.; maximum 375 lbs.

• Must contain a solid, puncture proof wheels with no flats guarantee

• Must contain a 3/8in pressure hose with a minimum length of 15ft

• Must contain 1/2in return hose with a minimum length of 15ft

• Must contain an electric starter with oversized battery

• Must use fluid type MIL-H-5606

• Pump Pressure limits o Must have complete pump pressure adjustment controls, pressure vary from aircraft to aircraft o Must have pump pressure gauge 0 – 4000 psi o Minimum sustainable operating pressure 450 +/- 50 psi o Maximum sustainable operating pressure 3500 +/- 50 psi

• Pump Flow 6 gallons per minute (GPM) o Must have complete pump flow (GPM) adjustment controls, pump flow vary from aircraft to aircraft o Must have pump flow gauge 0-10 GPM o Minimum sustainable operating flow 4 GPM o Maximum sustainable operating flow 10 GPM

• Pressure Gauge and Flow Meter must have certificates of calibration Must contain a panel mounted operational instructions

• Must have Industrial Duty Engine horse power (HP) o Minimum 20 HP o Maximum 25 HP

• Reservoir capacity o Minimum 12 US gallons o Maximum 15 US gallons

• Must contain reservoir selector valves

• Must contain panel mounted controls and monitoring system

• Must contain a high pressure oil temperature gauge (1% accuracy)

• Must contain a high efficiency, Non-Bypass Pressure Filtration system

• Must contain a large capacity return Filter with water absorbing filter to remove moisture in hydraulic fluid, filter must be rated at;

FA3099-22-Q-0023

Attachment 1

22 Aug 22 o Minimum 01 micron o Maximum 10 microns

• Must contain a 2 year Manufactures Warranty The Hydraulic Power Unit will be delivered to Laughlin AFB Texas building 508.

FA3099-22-Q-0023

Attachment 1

22 Aug 22