Attachment 1 Data.pdf
PDF 190 KB Posted
- Attached to
- Refurbished Vertical Grinder
- Solicitation number
- SPMYM2-21-Q-21090001
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPMYM2-21-Q-2109 0001.pdf | ||
| SPMYM2-21-Q-2109 0001 Conform.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Document No.: 1182-6436
Salient Characteristics
Remanufactured Vertical Grinding Machine
Work Spindle Nominal swing 30” Actual maximum swing 32” Standard face plate diameter 25” Work spindle speed range, infinite 0 – 450 rpm Face plate to floor 33 3/4 “
Wheel Spindle & Grinding Head Nominal hole depth capacity 18” Stroke of grinding head (maximum) 21” Clearance over face plate (maximum) 20” Clearance over work spindle (maximum) 22 1/2” Grinding head stroke 0 – 235 in./min.
Tarry period, either or both ends of stroke 0.6 – 12 sec.
Angle setting of head, either side of center 0 – 45°
Motors Wheel spindle 7.5 hp, 3450 rpm Hydraulic system 5 hp, 1200 rpm
Power Input 230 V, 60 Hz, 3ph
Floor Space Right to left (overall maximum) 70” Front to back (overall maximum) 52 3/4” Height (overall maximum) 121”
-Machine shall be NRTL certified at the contractor’s factory before shipment to the government.
-Carcass shall be procured by the contractor as a “core” will not be provided by the government.
File details come from the government source that posted it. Updated .