Attachment 1 - BLD 501 CAGES STATEMENT OF WORK.pdf
PDF 310 KB Posted
- Attached to
- 352nd SWTS Cadre Lockers
- Solicitation number
- F2MTRP3080AW01
About this file
This statement of work details requirements for procuring and installing new animal cages at a military installation. The contractor shall purchase and install approximately 33 new wire mesh cages of varying sizes in an existing caging room at Building 501 on Pope Army Airfield to replace old cages. Specifications are provided for the cages, which must have welded wire mesh panels, angle iron frames, sliding doors, shelving, and privacy curtains. The contractor must submit a design layout for approval and complete removal of the old cages and installation of the new cages within 14 days of award. Work is to take place on weekdays from 8:30am to 4:30pm and shall not interfere with training operations. All workers must have valid photo IDs and background checks to gain base access. The government will inspect the completed work prior to acceptance.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
FOR PROCURING AND INSTALLATION
OF CAGES FOR THE 352D SWTS
1. DESCRIPTION OF SERVICES
The contractor shall procure remove old and install new cages in the existing student cage room of BLD 501 for the 352D SWTS, Pope Field, NC, 28308.
2. SCOPE OF WORK
The contractor shall perform the work at BLD 501, Pope Army Airfield. The contractor will provide a design for placement of new cages to be approved by the Facility Manager (Mr. Dan Kaster). The contractor purchase, ship new cages, remove old and install new cages per provided specifications in the existing cadre cage room of BLD 501. Installation includes complete construction of all supports, walls, doors, etc. Cage specifications will be provided. Old cages will be removed from the building and placed on a trailer (GOV provided) for DRMO. All materials will be approved by the facility manager (Mr. Dan Kaster). The contractor shall coordinate with the Facility Manager to make arrangements for base access. Approximately 33 cages will be installed (pending proposed layout) of 6' x 6'x 8'H. Depending on layout, an additional 6' x 6' cage may be installed for miscellaneous storage as well as possibly two smaller cages pending room provided in the accepted proposed layout.
Shelves in current cages will be re-used. New 60" x 24" shelving will have to be provided for approximately 7 cages. All cages will have a new 24"x18" heavy duty shelving unit.
3. WORK HOURS
3.1 Work shall be performed during normal duty business hours: M-F 8:30am – 4:30pm EST.
3.2 Work shall be done in such as manner as to not interfere with student training. Vehicle placement (parking) and movement shall be coordinated with the facility manager to ensure placement does not interfere with normal operations of the Squadron.
3.3 Work shall be completed within a timely manner not to exceed 14 days after award of the contract.
4. SECURITY
4.1 All workers shall be legal U.S. Citizens with valid picture IDs who are able to gain clearance on to the military installation.
4.2 No guns, drugs, or illegal paraphernalia will be authorize on the military installation.
4.3 All vehicles, equipment, and containers may be subject to search at any time while on or seeking access to the military installation.
5. INSPECTION AND ACCEPTANCE
Upon completion of work, the Unit Facility Manager will inspect the area prior to government acceptance.
6. MATERIALS LIST AND CAGE SPECIFICATIONS (33 ea cages- any additional cages will match) WIRE MESH ENCLOSURES - Specifications Mesh 10 gauge welded wire mesh (2” x 1”) rectangular woven wire 101 ¼”H including ceiling Panels
1014512809C Highlight
Frame: 1 ¼” x 1 ¼” x 1/8” Angle Fabrication: Mesh is securely welded to frame with flat steel stiffeners Welded to frame behind mesh panels longer than 3’6”
Doors Frame: 1 ¼” x 1 ¼” x 1/8” Angle Fabrication: Mesh is securely welded to frame with flat steel stiffeners Welded to frame for extra strength where needed.
Sliding doors are 36” W x 96”H with padlock hasp
Post Material: 2 x 2 x 14-gauge Square Tubing Fabrication: ¼” x 2” x 7” plate welded at base of post
Hardware 3/8” standard thread grade two plated for panel connections. Door hardware shall be ¼” x 1” self-drilling screws. 3/8” floor anchors and all other hardware furnished with each job.
Finish All non-plated parts shall be powder coated gray.
Includes black (non-see through) weld curtains on all panels except ceiling.
Each Wire cage (33 pending layout-with possible extra miscellaneous cage with no shelving or privacy curtain) (72W x 72D x 96H) includes:
36”W sliding door, hanger bar with shelf Privacy curtains on all sides 1 section of heavy duty steel shelving 60W x 24D x 87H with 4-6 shelves (existing shelving that fits these dimensions will be re-used-need approximately 7 new shelves of this type) 1 section of heavy duty steel shelving 24W x 18D x 87H with 6 shelves 1 Hanger bar w/shelf above 36" long
Extra smaller Wire Cage Lockers (Qty: 2 pending layout) Each cage: 60”D x 40”W x 101”H with ceiling Includes:
• 18”W sliding door with padlock hasp Shelf with hanger bar below
• Privacy curtains on 4 sides
• 1 section of shelving 36W x 18D x 87H with 7 shelves, 6 openings 1 two drawer cabinet with wood top 24W x 18D x 20H
| WIRE MESH ENCLOSURES - Specifications |
| Panels |
| Doors |
| Post |
| Hardware |
| Finish |
| Each Wire cage (40W x 60D x 101H) includes: |
File details come from the government source that posted it. Updated .