Attachment_1_AFMC_158.pdf
PDF 71 KB Posted
- Attached to
- Pre-Solicitation Synopsis F-16 CCA
- Solicitation number
- FA821226Q0236
About this file
This is an AFMC Form 158 Packaging Requirements document for purchase instrument FD20202600236-00 that establishes packaging standards for two distinct line items under military contract conditions.
The document mandates compliance with MIL-STD-129 (Revision R) and MIL-STD-2073-1 (Revision E) for all packaging and marking procedures. All wood packaging material (WPM)—including pallets, skids, crates, dunnage, and related containers—must be constructed from debarked, heat-treated wood at 56 degrees Celsius (133 degrees Fahrenheit) for a minimum of 30 minutes, with certification by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in compliance with International Standards for Phytosanitary Measures (ISPM) No. 15 to prevent invasive species such as pinewood nematode. The first line item (1680DTG26012AWF) requires no packaging data, while the second line item (1680010513052WF) specifies MIL Long Line Packaging at preservation level MIL and packaging level B, with unit pack dimensions of 12.5 x 12.5 x 14.5 inches and a cube of 1.311 cubic feet. This second item also requires ESD (electrostatic discharge) protection and labeling. Shipping containers must be marked in accordance with MIL-STD-129 with additional marking requirements potentially including unit serial numbers, original equipment manufacturer (OEM) names, and OEM model numbers as specified. The packaging requirements were approved by Stephine A. Lucero, Packaging Specialist with the 406 SCMS/GULAA organization on 11 December 2025.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PACKAGING REQUIREMENTS
PURCHASE INSTRUMENT NUMBER: FD20202600236-00 VERSION: 1
MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN
PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAA No Packaging Data Required
ITEM(S):
1680DTG26012AWF
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
VENDOR PACKAGING INSTRUCTIONS:
PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:
AAB MIL Long Line Packaging MIL B
ITEM(S):
1680010513052WF
CODED DATA:
QUP ICQ
PRES
METH CD
PRES
MTL
WRAP
MTL
CUSH
DUNN CT
UNIT
CONT
INT
CONT UCL
SPEC
MKG
UNIT PACK
WEIGHT
UNIT PACK
LENGTH
UNIT PACK
WIDTH
UNIT PACK
DEPTH
UNIT PACK
CUBE OPI
1 000 GX 1 00 K3 P6 A NR 00 B 39 8.00 12.5 12.5 14.5 1.311 M
ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:
SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:
<35> F000009XA4 ESD PROTECTION AND LABELING REQUIRED
VENDOR PACKAGING INSTRUCTIONS:
Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.
Page 1 of 2AFMC 158 Version 1Generated by PRPS using Jasper Reports on 19 Dec 2025
PACKAGING REQUIREMENTS
Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.
ORGANIZATION / OFFICE SYMBOL:
406 SCMS / GULAA
PACKAGING SPECIALIST:
Lucero, Stephine A
PHONE NUMBER:
801-775-4142 / 775-4142
SIGNATURE:
//SIGNED//Lucero, Stephine A
DATE:
25345 - 11 DEC 2025
Page 2 of 2AFMC 158 Version 1Generated by PRPS using Jasper Reports on 19 Dec 2025
File details come from the government source that posted it. Updated .