Attachment 1 - 39 SFS Mobile Ballistic Shield Salient Characteristics.pdf
PDF 105 KB Posted
- Attached to
- 39 SFS Mobile Ballistic Shields, Incirlik AB
- Solicitation number
- FA568524Q0039
About this file
This document is the Salient Characteristics for a mobile ballistic shield required by the 39th Security Forces Squadron at Incirlik Air Base, Turkey. The shield must be NIJ Level III certified, compliant with Department of State Standard 01.01, and made with US-produced steel. Key characteristics include:
- Minimum size of 24" wide x 77" high x 46" deep, with up to 12 sq ft of transparent armor and 6.8 sq ft of opaque armor
- Must allow field replacement of the armor without tools
- Overlap between transparent and opaque armor to prevent gaps
- Minimum weight of 600 lbs for blast/fragmentation protection
- Polyurea coating for weather resistance
- Available accessories include casters, towbar, weather-resistant awning, and weapons mounts
This requirement is set-aside for Turkish vendors only per the Defense Economic Cooperation Agreement (DECA). The contract type will be Firm Fixed Price, awarded to the lowest priced, technically acceptable offer from a SAM-registered vendor.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Mobile Ballistic Shield
Required Certifications
• Must be NIJ Level III certified as a system by an independent, recognized ballistics laboratory/testing facility.
• Must be Department of State Standard 01.01 certified as a system.
• Must provide Department of State part numbers with quote.
• Must provide Independent testing laboratory certification documentation with the quote.
• Must provide product past performance and recent customer list.
• Must comply with the US Steel and Security Act requiring US made steel for DoD.
Characteristics
• Shield must provide head to toe protection in a mobile platform.
• Shield must be operational in harsh weather conditions to include extreme cold and hot environments.
• Must have at least 5 square feet of viewable transparent armor. Available in up to 12 square feet of viewing area.
• Must have 6.8 square feet of opaque armor steel.
• Armor must NOT be welded. Welding armor will create a heat affected zone that reduces or eliminates the ballistic capability in that area.
• Must allow the user to replace opaque steel and transparent armor in the field without any tools.
• Must provide over-lapping protection between the transparent and opaque armor for gap prevention.
• Shield must be able to size to 48” wide to 84” high. Minimum measurements 24” wide x 77” high x 46” deep.
• Must have solid ATV style tires and mobile over unimproved surfaces with a vehicle with a ball or pintle adaptor hitch.
• Must weigh at least 600 pounds to optimize protection from blast, over pressure, wind loading factor of safety, primary and secondary fragmentation.
• Exterior protection must be a polyurea coating to minimize effects of weather and reduce visual and thermal signature.
• Shield must have the following available accessories which could be purchased in the future; rear swivel casters, towbar, weather resistant awning, ballistic resistant awning, heater, long range acoustic device, searchlight, weapons mounts, and armor strip to connect multiple shields without a gap in protection.
File details come from the government source that posted it. Updated .