Attachment 1 24-45-0091 - TTFOP Monel - SOW_LR(20231204).pdf

Procurement of Level-I Hardware

LEVEL I

STATEMENT OF WORK FOR PROCUREMENT OF

MONEL SIX INCH ROUNDS

1.0 BACKGROUND

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) USW Platforms and Payload Integration Department (Code 45) and the Submarine Defense Systems Branch (Code 4523), is responsible for providing Research, Development, Test and Evaluation (RDT&E), systems and logistic products, acquisition, system integration, configuration management, and system level depot maintenance support for submarine defensive systems.

1.1 Place(s) of Performance: Contractor’s site.

1.2 Authorized Users: Code 4523 is the Technical Direction Agent (TDA) for this effort.

1.3 Sponsors: In-Service Submarines Program Office (PMS392).

1.4 Types of Funding: Operations & Maintenance, Navy (O&M,N).

2.0 SCOPE

This Statement of Work (SOW) is for the procurement of raw Monel material for use in a submarine application on submarine torpedo tubes. The material provided must comply with Applicable Document 3.4. The hardware shall be certified Level I by a Certifying Activity (CAD) for acceptance.

3.0 APPLICABLE DOCUMENTS

Number Title Task Number

3.1

QQ-N-281 Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire Forgings, and Structural and Special Shaped Sections Rev. D Amendment-2, dated 26 Aug 1974 4.1.1

3.2 NAVSEA 0948-LP-045-7010 (Rev 3) Material Control Standard, dated 1 April 2005 4.1.1, 4.1.2

3.3 MIL-STD-792 Identification Marking Requirements for Special Purpose Components Rev. F, dated 19 May 2006 4.2.2, 4.3.1

3.4

Appendix A, QP-01/SOP-8.1 Rev. A, Minimum Standard Quality Contract Requirements for Material Procurement, Modification, Repair or Overhaul of Material Non-Nuclear Level I Material; SMICS L1, C1, S1 and Level I Support SMIC Q3, VG, dated 5 May 2023 4.1.1, 4.1.3

3.5 MIL-STD-130, Identification Marking of U.S. Military Property Rev. N, dated 16 Nov 2012 4.2.2, 4.3.1

3.6 ANSI/ISO/ASQ 09001-2015, American National Standard; Quality Management Systems-Requirements, dated 15 Sep 2012 4.1.1

3.7 ANSI/NCSL Z540-6-2013, Calibration Laboratories and Measuring and Test Equipment – General Requirements, dated 01 Jan 2013 4.1.1

3.8 NAVSEAINST 5100.3 Rev. E, Mercury, Mercury Compounds, and Components Containing Mercury or Mercury Compounds, Control of, dated 20 Feb 2018 4.1.1

3.9

NAVSEA NOTICE 5000, Activities Qualified to Perform Submarine Safety, Fly-By Wire Ship Control Systems, and Deep Submergence Systems-Scope of Certification Work, dated 28 Jul 2023 4.1.1

3.10 ASTM D3951-18 Standard Practice for Commercial Packaging, dated 4 Oct 2023 4.3.1

4.0 REQUIREMENTS

4.1 Manufacturing

4.1.1 The contractor shall provide 12 (+/- 0.5) feet of MONEL 6” Diameter, Round Bar. Nickel-Copper Alloy, QQ-N-281, CLASS A, Form 1, Hot Finish, Stress Relieved in accordance with Applicable Documents 3.1, 3.2, 3.4, 3.6, 3.7, 3.8, and 3.9. Multiple pieces are acceptable in 4 (+/- 0.5) feet length minimum.

4.1.2 Quality control in accordance with Applicable Document 3.2 for Level I items applies. The minimum quality requirements for procurement, modification, repair, or overhaul of Non-Nuclear Level I Material and Level I support is provided in SOW and Applicable Document 3.2;

Applicable Document 3.4 applies.

4.1.3 All Level I hardware shall be certified Level I material prior to acceptance and certified in accordance with Contract Data Requirements List (CDRL) A001 and A002 attached to this SOW. As the Government uses this Monel material for Material Transfer, the Contractor shall verify material traceability documentation in accordance with Applicable document 3.4.

4.2 Marking

4.2.1 The contractor shall mark metallic component with the following:

- Contractor Cage Code/Trademark (if applicable).

- Material Specification (also Alloy, Form, Condition, as applicable).

4.2.2 All required markings are to be applied in accordance with Applicable

Documents 3.3, 3.4 and 3.5, if applicable. All required markings are to be made as close together as possible in accordance with Applicable Documents 3.3, 3.4, and 3.5.

4.3 Shipping

4.3.1 Monel Level I material shall be shipped in accordance Applicable

Document 3.4. Packaging shall be Best Commercial Practice in accordance with Applicable Document 3.10 and marked in accordance with Applicable Documents 3.3 and 3.5.