Attachment 03 - Furniture Typicals.pdf

RFQ SUBMITTAL STANDARD FORM 5 - RA STATION

GSA PBS- Region Northwest

RFQ#

GSA RFQ Item #: RA STATION

Description:

Quantity: 1

Location:

Diagram/Photo of Intent:

Description:

Dimensions:

Notes:

4. Cable management to be housed within the panel system base.

Finishes: Painted Steel Panel Frames, Door Frame, Plates and Trims : Standard Paint offerings

Door is standard laminate with brushed stainless locking lever set.

Design Intent: Refer to supporting drawings, P2.1, P2.2, AND P3.1.

Door to be locking, and panels secured to existing architecture with a wall start.

Finishes are to match the existing workstations in their suite as closely as possible.

Agency is to select from every available Vertical Surface Fabrics by manufacturer for acoustical tiles.

Awarded Bidder to provide Agency finish samples to ensure the finishes match their existing stations.

ENCLOSURE SPECIFICATIONS

RA STATION 1429

Written specifications and support drawings take precedence. Images and Photos are for concept.

RA Workstation 1429

8. Lifetime Warranty

Restricted Access Workstation 1400-35

1. 12'-6"W x 15'-9" D x 7'-2"H (See drawing)

2. Door has a 90 degree swing, is fully locking with an office lockset.

3. Station to contain (3) hospital grade surge protected electrical outlets housed within the furniture panel.

(Refer to plans)

5. Must meet ANSI/BIFMA X5.9-2012

6. Heavy Duty steel segmented panels and connectors

7. Should have glides to allow leveling within 2"

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

Do not remove this notice. Properly destroy documents when no longer needed.

RFQ SUBMITTAL STANDARD FORM 5 - RA STATION

RFQ#

GSA RFQ Item #:

Description:

Quantity:

Location:

These should coordinate with the following:

These items are existing: Task chair, mobile pedestal file, lateral file and yoga mat.

SEATING SPECIFICATIONS

RA Station continued

RA Workstation 1429

RA STATION 1429

1. Existing Interior Architecture.

2. State or Federal requirements must be followed by the Awarded Bidder to make the furniture connection to the building provided prower source. Agency to clarify.

3. Refer to Drawings P2.1, P2.2, P3.1.

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

RFQ SUBMITTAL STANDARD FORM 5 - Sit to Stand Desk

RFQ#

GSA RFQ Item #:

Description:

Quantity:

Location:

Diagram/Photo of Intent:

Description:

Dimensions:

Notes:

Finishes: High Pressure Laminate Top: Laminate

GSA to select Laminate from manufacturer's full line at time of award

3mm Flat Edge Band, PVC Free, to match laminate finish

Metal Base: Standard finish offering to match existing agency desks

Possible Programs:

Pre or Post-Consumer Recycled Content

Able to be recycled after use

5. 12 year warranty

6. Leveling glides allow 1" to adjust to uneven floors

LEED - V4.1 Low Emitting Materials

4. Table to meet or exceed ANSI/BIFMA X5.9-2008

TABLE SPECIFICATIONS

D-1

Pneumatic Sit to Stand Desk

WS: 1400-17, 1400-33, & 1400-34.

Written specifications take precedence. Images and Photos are for concept.

Pneumatic Sit to Stand Desk, Rectangular top

1. 22-1/4"w X 58" L (+/- 2") with an adjustable height from 26" - 43"H

1. Must meet GreenGuard Certification

2. Desk base shall be able to hold a weight of 150 lbs.

3. Table to have clean lines and detailing

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

RFQ SUBMITTAL STANDARD FORM 5 - Sit to Stand Desk

RFQ#

GSA RFQ Item #: D-1 continued

Description:

Quantity:

Location:

These should coordinate with the following:

SEATING SPECIFICATIONS

WS: 1400-17, 1400-33, & 1400-34.

Pneumatic Sit to Stand Desk

1. Refer to plan for replacement for the existing fixed 72" x 24" worksurface.

2. At least a 1-3/4" gap must separate the backs of a table from a panel behind the desk.

3. A 1" gap separates the sides and adjacent worksurfaces.

4. Refer to Drawings P1.1, P2.1, P2.2, P3.1.

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY