Attachment 01 - Statement of Need - 26 June 2026.pdf
PDF 53 KB Posted
- Attached to
- Spectrum Analyzer
- Solicitation number
- FA460026Q0077
About this file
This is a Statement of Need for spectrum analyzer equipment required by 55 CS/SCXF Installation Spectrum Management. The organization requires a signal and spectrum analyzer capable of electromagnetic analysis across a frequency range of 2 Hz to 85 GHz, with analyzers exceeding 85 GHz to be reviewed favorably. The device may be configured as either a fixed desktop unit or a portable handheld device.
The minimum technical specifications include phase noise of -140 dBc at 10 KHz offset, an OCXO precision frequency reference, and support for comprehensive signal analysis capabilities. Required measurement capabilities encompass 5G-NR R15 downlink, AM/FM/PM modulation analysis, VOR/ILS measurements, and standard single-carrier analysis for WCDMA, CDMA2000, TD-SCDMA, TETRA, and NB-IoT protocols. The analyzer must support multiple WLAN standards (IEEE 802.11a/b/g/n/p/ac/ax/be/bn/ad/ay), LTE, 5G NR, HRP UWB IEEE 802.15.4z, Bluetooth BR/EDR/LE, and automotive radar analysis. Additional required capabilities include component characterization and linearization, pulsed and frequency-hopping radar waveform analysis, EMC pre-compliance measurements, noise power ratio and phase noise measurements, spurious measurements, and Verizon 5GTF uplink/downlink analysis. The procurement includes documentation of calibration values, a recommended antenna set for mobile operation, a transportation case if available, five-year warranty with calibration support, and comprehensive training on spectrum analyzer operation.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Need
55 CS/SCXF Installation Spectrum Management needs a spectrum analyzer, with the minimum capabilities to provide electromagnetic analyzes between 2 Hz to 85 GHz. It can be either fixed (Desk Top) or Portable device (Hand Held). Specification of minimum is listed below and as well as exceed standards will also be reviewed.
Minimum Characteristics:
- Signal and Spectrum Analyzer Frequency Range 2 Hz to 85 GHz (any Analyzer that can exceed 85 GHz will be reviewed).
-Phase noise of -140 dBc to 10 KHz offset
- OCXO, precision frequency reference
- 5G-NR R15 DL Measurements
- AM/FM/PM modulation analysis
- VOR / ILS Measurements
-Standard applications and measurements on single carriers, e.g. WCDMA, CDMA2000, TD-SCDMA, TETRA, NB-IoT
-LTE, WLAN IEEE 802.11a/b/g/p signals 5G NR
-WLAN IEEE 802.11n signals
-WLAN IEEE 802.11ac/ax/be/bn signals
-HRP UWB IEEE 802.15.4z
-WLAN IEEE 802.11ad signals
-WLAN IEEE 802.11ay signals
-Component characterization and linearization (amplifiers, frequency converters, etc.)
-Pulsed radar
-Wideband measurements on CW and frequency hopping radar systems
-Automotive radar
-Pulse measurements
-Time sidelobe
-Modulation analysis for AM/FM/PM modulated single carriers
-Multicarrier group delay measurements
-Sub span measurement for group delay
-EMC diagnosis and pre-compliance measurements in line with commercial and military standards
-Noise power ratio measurements
-Phase noise measurements
-Spurious measurements
-Bluetooth® BR/EDR/LE measurements
-Verizon 5GTF downlink
-Verizon 5GTF uplink
-Beyond 5G measurements extension for uplink/downlink
-High rate pulse repetition frequency ultrawideband measurements
-Extension to 160 MHz signal analysis bandwidth
-Documentation of calibration values
-Recommend Antenna set for mobile operation.
-Transportation Case (if available)
-5 Year warranty and Calibration
-Training of Spectrum Analyzer
File details come from the government source that posted it. Updated .