Attachment 01 - Statement of Need - 25 August 2026.pdf
PDF 53 KB Posted
- Attached to
- Spectrum Analyzer
- Solicitation number
- FA460026Q0122
About this file
This is a Statement of Need for spectrum analyzer equipment required by 55 CS/SCXF Installation Spectrum Management. The organization seeks either a fixed desktop or portable handheld spectrum analyzer capable of electromagnetic analysis across a frequency range of 9 kHz to 80 GHz, with minimum phase noise of -140 dBc at 10 KHz offset and an OCXO precision frequency reference.
The required capabilities include: 5G-NR R15 DL measurements, AM/FM/PM modulation analysis, VOR/ILS measurements, and standard applications for single carriers (WCDMA, CDMA2000, TD-SCDMA, TETRA, NB-IoT). The analyzer must support multiple WLAN standards (IEEE 802.11a/b/g/p/n/ac/ax/be/bn/ad/ay), LTE, HRP UWB, component characterization, radar measurements (pulsed, CW, frequency hopping, and automotive), pulse measurements, time sidelobe analysis, multicarrier group delay measurements, EMC diagnosis and pre-compliance testing, noise power ratio measurements, phase noise measurements, spurious measurements, and Bluetooth BR/EDR/LE measurements. Additional requirements include beyond 5G measurement extensions, high-rate pulse repetition frequency ultrawideband measurements, 160 MHz signal analysis bandwidth extension, calibration documentation, recommended antenna sets for mobile operation, transportation case if available, five-year warranty and calibration coverage, and comprehensive training of the spectrum analyzer.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Need
55 CS/SCXF Installation Spectrum Management needs a spectrum analyzer, with the minimum capabilities to provide electromagnetic analyzes between 9 kHz to 80 GHz. It can be either fixed (Desk Top) or Portable device (Hand Held). Specification of minimum is listed below and as well as exceed standards will also be reviewed.
Minimum Characteristics:
- Signal and Spectrum Analyzer Frequency Range 9 kHz to 80 GHz
-Phase noise of -140 dBc to 10 KHz offset
- OCXO, precision frequency reference
- 5G-NR R15 DL Measurements
- AM/FM/PM modulation analysis
- VOR / ILS Measurements
-Standard applications and measurements on single carriers, e.g. WCDMA, CDMA2000, TD-SCDMA, TETRA, NB-IoT
-LTE, WLAN IEEE 802.11a/b/g/p signals 5G NR
-WLAN IEEE 802.11n signals
-WLAN IEEE 802.11ac/ax/be/bn signals
-HRP UWB IEEE 802.15.4z
-WLAN IEEE 802.11ad signals
-WLAN IEEE 802.11ay signals
-Component characterization and linearization (amplifiers, frequency converters, etc.)
-Pulsed radar
-Wideband measurements on CW and frequency hopping radar systems
-Automotive radar
-Pulse measurements
-Time sidelobe
-Modulation analysis for AM/FM/PM modulated single carriers
-Multicarrier group delay measurements
-Sub span measurement for group delay
-EMC diagnosis and pre-compliance measurements in line with commercial and military standards
-Noise power ratio measurements
-Phase noise measurements
-Spurious measurements
-Bluetooth® BR/EDR/LE measurements
-Beyond 5G measurements extension for uplink/downlink
-High rate pulse repetition frequency ultrawideband measurements
-Extension to 160 MHz signal analysis bandwidth
-Documentation of calibration values
-Recommend Antenna set for mobile operation.
-Transportation Case (if available)
-5 Year warranty and Calibration
-Training of Spectrum Analyzer
File details come from the government source that posted it. Updated .