Attachment 01 Specifications.docx

Crew Truck- Utility Van Bed Purchase Contract No.

R5-Stanislaus National Forest

C. DESCRIPTION/ SPECIFICATIONS/ STATEMENT OF WORK

C.1 Scope of Work Description of Work: This project is for the fabrication and installation of van style utility truck body. The utility body shall be constructed to fit the design vehicle while still providing the salient features required as shown in the planset. The design vehicle is a 2022 Ford F-350 Crew Cab DRW. The requirements for the truck body are based on the KUVcc utility van bodies constructed by Knapheide Manufacturing company. The contractor shall provide a truck body in accordance with the KUVcc utility van body or provide an equivalent product that meets the said requirements as shown in the planset. The features and requirements as shown in the plans are conceptual. It is up to the contractor to provide for a final design.

BASIC TRUCK BODY FEATURES:

1. Paint exterior and interior to match original cab color code unless otherwise shown. Paint bed using an electrodeposition finishing system known as E-coat.

2. Provide a minimum of a 12 gauge thick steel floor structure.

3. Construct with corrosion resistant Galvanneal Steel.

4. Taillights and running lights shall be wired to the cab of the truck. Interior cargo bed lighting may be switch mounted in the cargo bed. Lights shall be LED.

5. Bin doors shall double paneled. The exterior panel shall be a minimum of 14 gauge steel and the interior panels shall be a minimum of 20 gauge galvanneal steel. Doors shall have double springs over center retainers.

6. Cargo doors shall have protective steel mesh on the interior side of the windows and be operated. with nitrogen gas struts and slam latches. The doors shall be double paneled with the same gauge thicknesses as the bin doors.

7. Cargo and bin doors shall be weatherproof with Neoprene door seals.

8. Bin doors and rear cargo door hinges shall be continuous and made of stainless steel.

9. Shelving where indicated shall have a minimum of 250 lb capacity.

10. Bin doors and rear panel doors shall have locking rotary style latches keyed the same.

11. Rear bumper shall be heavy duty with a minimum of 11 gauge steel coated with a nonslip surfaced and colored black.

12. Bin dimensions shall meet the capacity requirements as shown on the plans and be vented where indicated.

13. The cargo area shall have a vent and 2 interior LED dome lights.

14. Provide a license plate holder which will not obstruct the taillights of functions of the utility bed.

15. Interior cargo bed shelving shall be a minimum of 14 gauge steel.

Contractor Responsibility: The Contractor shall provide everything--including, but not limited to, all equipment, supplies, transportation, labor, and supervision--necessary to complete the project, except for that which the contract clearly states is to be furnished by the Government.

C.2 Submittals

1. finalized shop drawings

2. manufacturer’s warranty

3. owner’s manual C.3 Technical Requirements

Follow industry standards. For accessories, follow manufacturer requirements. All welds shall be conducted by a certified welder.

image1.emf