Attachment 01 -Media Disintegrator - Requirement Document.pdf

177 Communications Flight – Media Disintegrator Requirement

1.0 Scope

This specification defines minimum requirements for a SSDM - 2MM Media Disintegrator (or approved equal).

2.0 System Architecture and Equipment

The device must be listed in the NSA/CSS Evaluated Products List for Solid State Disintegrators.

2.1 SSDM - 2MM Media Disintegrator Specifications

2.1.1 Device Must:

2.1.1.1 Destroy solid state media, including SIM cards, Flash drives, thumb drives, solid state drives, circuit boards, smart phones and tablets to 2mm particle size or less.

2.1.1.2 Destroy optical media, including CDs, DVDs and Blu-Ray to 2 mm particle size.

2.1.2 PERFORMANCE and SAFETY

2.1.2.1 Device Must:

2.1.2.1.1 Be a simple, automatic, push-button operation.

2.1.2.1.2 Have an internal brain to sense overload and momentarily reverse automatically to clear and prevent jams.

2.1.2.1.3 Have an automatic bin-full sensor.

2.1.2.1.4 Have destruction blades, grinders and screens must be easily reused, adjusted and replaced.

2.1.2.1.5 Have acoustics 85dB or less.

2.1.2.1.6 Use a self-contained, 3-stage air filtration system consisting of pre, carbon and HEPA filters.

2.1.2.1.7 Have destruction blades out of reach, an emergency stop button and safety rated cover interlocks.

2.1.2.1.8 Have a main power stitch able to accept a lock for Lockout/Tagout in the OFF position.

2.1.3 DIMENSIONS and WEIGHT

2.1.3.1 Device Must:

2.1.3.1.1 Have a footprint no greater than 30” x 43”.

2.1.3.1.2 Not have a weight of more than 1,200 lbs.

2.1.3.1.3 Have castor wheels.

2.1.4 POWER REQUIREMENT

2.1.4.1 Device Must:

2.1.4.1.1 Be 200-240V, 1 phase, 50/60 Hz, 6A.

2.1.5 SYSTEM ACCESSORIES

2.1.5.1 Device Must:

2.1.5.1.1 Include castor wheels, cleaning brush and tools as well as a debris bin and bags.

3.0 DELIVERY

3.1 Item shall be delivered to 177FW NJ ANG 400 Langley Road, Egg Harbor Township, NJ 08234